Hello,
i have problem with my freebsd 4.6p2 (i386) over an0 interface (cisco 4800 airo net
pci card), If i use interface all is work, but after 15-30 min, if i not use it, shi
stop work and frezzing. Need restart server to resume normal operation. Any body know
what is the problem and how to fix
Hi all,
I'm trying to setup up Tunneling VPN between two FreeBSD boxes.
I have network A talking through gateway A to Network B via gateway B
Network A IP Range - 192.168.11.0/24
Network B IP Range - 192.168.12.0/24
Gateway A Internal IP Address - 192.168.11.1
Gateway A External IP Address - 192
ATTN: THE PRESIDENT/CEO
SIR,
I AM ANTONIO SAVIMBI JR, SON OF THE LATE ANGOLAN OPPOSITION LEADER OF NATIONAL UNION
FOR THE TOTAL INDEPENDANCE OF ANGOLA (UNITA) DR JONAS SAVIMBI WHO WAS KILLED IN A
CLASH WITH THE GOVERNMENT TROOPS ON FRIDAY, FEBRUARY, 22ND 2002 IN THE MEXICO
PRO
* Steve Warwick <[EMAIL PROTECTED]> [20021031 05:19]:
> Hi,
>
> I have sendmail / qpopper running on a production machine and have yet to
> figure out a way to open mail up to my client sin a secure way.
[snip]
> Is there a way to do this that will not open my machine up
I recommend you use SMTP AUTH if your mail clients support it. There is some
info on sendmail.org: http://www.sendmail.org/~ca/email/auth.html
Cheers,
Barry
--
Barry Byrne, IT Manager,
WBT Systems, Block 2, Harcourt Centre
Harcourt Street, Dublin 2, Ireland
> -Original Message-
> From:
I type "dmesg" and get this output. I didn't get this before. Could someone tell me
what this means?
fd0c: hard error writing fsbn 1 of 1-3 (No status)
fd0c: hard error writing fsbn 7 of 7-9 (No status)
fd0c: hard error writing fsbn 10 of 10-12 (No status)
fd0c: hard error writing fsbn 16 of 16-
Chris Pressey wrote:
>
> On Wed, 30 Oct 2002 23:41:49 +0200
> Giorgos Keramidas <[EMAIL PROTECTED]> wrote:
>
> > On 2002-10-29 19:26, Chris Pressey <[EMAIL PROTECTED]> wrote:
> > > On Tue, 29 Oct 2002 14:28:39 +
> > > Matthew Seaman <[EMAIL PROTECTED]> wrote:
> > > > I think what has happened
Hi All,
Every 5 minutes I can see the message about vmemoryuse.
It's from logs:
Oct 29 01:25:00 mybsd /usr/sbin/cron[517]: getting vmemoryuse resource limit: Invalid
argument
Oct 29 01:30:00 mybsd /usr/sbin/cron[520]: getting vmemoryuse resource limit: Invalid
argument
Oct 29 01:31:00 mybsd /usr
As I can record, I did upgrade scsi card firmware (it was a Compaq Smart
Array 332) and Proliant's firmware also. Then switched from Unixware to
Linux on bios and both processors came up.
This specific machine were locking-up his networking, but I think this
were another issue (bug on nic) and n
> I've done this now with NO_OPENSSH=true in make.conf, but I *still* get
> errors!
>
I had the exact same results when I tried NO_OPENSSH=true. Kernel
^World
wouldn't compile. Seems like kernel is broken with NO_OPENSSH=true.
I'm using the cvsup-mirror port to create an unofficial mirror
for use within a private network with limited connectivity.
Local machines will cvsup various releases from this
repository.
Before using cvsup-mirror I disabled gnats and www. Now I see that the
docs are not updating in my repository.
I searched the archives for an answer to this question, and, although
it has been asked a few times, I didn't see any answers, so I thought
I would try again. In fact, someone a couple of months ago asked
about the very same motherboard I have.
I just picked up an MSI MS-6378 board, which has an o
running racoon&ipsec on my FBSD4.6-STABLE.the kernel log always sai
/kernel: IPv4 ESP input: no key association found for spi
and the worsed problem is that :
sometime my box can not connect to the other peers for long time before
restart racoon. especially, if two peers restart racoon on same t
[ -redirected to -questions where it belongs]
Michael C. Cambria wrote:
Hi,
I've just starting using SSH for X11 forwarding from one FreeBSD
4.6-Stable machine to another. One is home, the other in the office.
I've been successfull doing this with most programs I've tried. The man
page sug
Lute,
You will want to invoke the following:
make -DWITH_PSPELL install
I apologize, but I don't know where this is/might be documented.
However, it's a pretty general rule that you can go into any ports
directory and look through the Makefile. Scan for "if defined" or "if
!defined", etc. In t
Hi there,
I have been installing most of my software via the ports, and for the
most part it been a simple matter of:
make install clean
however now I would like to install sylpheed-claws with the pspell
option, and even though I have been through the info on make about three
times still can't g
On Wed, Oct 30, 2002 at 03:26:11PM +0100, Erik Mattsson wrote:
> Hi
>
> Ive installed the apache-1.3.26_3 port and trying to get it to work with TWiki
> (an intranet discussion/note board). But I cant limit the access of the sites.
>
> Ive made the following test:
> created a "test" dir in the Do
Moving up the pam_krb5 in the sshd section helped to a point. The problem
turned out to be having ChallengeResponseAuthentication set to yes in the
sshd_config. It seems it got into calling the pam authentication module 2x thus
confusing it and no ticket file was written. The way I figured this
I need to switch languages (English, French, Italian) very often within the
same document. Is there some way to switch keyboard layouts on FreeBSD
quickly and painlessly as can be done on Windows?
On Windows, hiting Left Shift + Alt switches between keyboards.
An alternate way of entering accente
Hello,
Well I have apache2+mod_php4 installed. Still my apache server does not
execute php scripts (it just sends them as plain text). After
installing mod_php4 i didn't modify anything in httpd.conf.
Should I? As i can tell the module is loaded. Why is the server not
running the scripts?
Regards
Rotaru Razvan wrote:
>
> Hello,
>
> Well I have apache2+mod_php4 installed. Still my apache server does not
> execute php scripts (it just sends them as plain text). After
> installing mod_php4 i didn't modify anything in httpd.conf.
> Should I? As i can tell the module is loaded. Why is the se
On Thu, 31 Oct 2002, Rotaru Razvan wrote:
> Date: Thu, 31 Oct 2002 06:41:45 -0800 (PST)
> From: Rotaru Razvan <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: regarding php installation
>
> Hello,
>
> Well I have apache2+mod_php4 installed. Still my apache server does not
> execute php scr
On Wed, 30 Oct 2002, Steve Warwick wrote:
> I have sendmail / qpopper running on a production machine and have yet to
> figure out a way to open mail up to my client sin a secure way.
>
> Eg. Client logs in from aol.com to check and send mail.
>
> Is there a way to do this that will not open my ma
On Wed, Oct 30, 2002 at 03:26:11PM +0100, Erik Mattsson wrote:
> Hi
>
> Ive installed the apache-1.3.26_3 port and trying to get it to work with TWiki
> (an intranet discussion/note board). But I cant limit the access of the sites.
>
> Ive made the following test:
> created a "test" dir in the Do
From: "John Bleichert" <[EMAIL PROTECTED]>
To: "Rotaru Razvan" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, October 31, 2002 8:45 AM
Subject: Re: regarding php installation
> On Thu, 31 Oct 2002, Rotaru Razvan wrote:
>
> > Date: Thu, 31 Oct 2002 06:41:45 -0800 (PST)
> > From: Rotar
On 2002-10-30 19:12, Chris Pressey <[EMAIL PROTECTED]> wrote:
> On Wed, 30 Oct 2002 23:41:49 +0200
> Giorgos Keramidas <[EMAIL PROTECTED]> wrote:
> > + Remove everything under /usr/obj.
> >
> > # chflags -R noschg /usr/obj
> > # rm -fr /usr/obj/*
> > + CVSup your sources.
> > + Start a new
Hi all,
I'm struggling to setup a VPN. I'm now reading through
http://www.daemonnews.org/200101/ipsec-howto.html
and this is confusing me even more :(
Reading this, I see:
However, if your goal is to set up a VPN, that is, link 2
widely-separated networks together over the Internet, then you'll
At 04:18 PM 10/31/2002 +, you wrote:
I have to slap my own hands - dumb.
I was not clear - When I say I have to switch languages, I am using
OpenOffice (trying to replace MS Ofc) and have to use text and graphics in
the same document. So, I don't think that I could use emacs since it is a
t
On Thu, Oct 31, 2002 at 03:37:52PM +, Wayne Pascoe wrote:
> Hi all,
>
> I'm struggling to setup a VPN. I'm now reading through
> http://www.daemonnews.org/200101/ipsec-howto.html
> and this is confusing me even more :(
>
> Reading this, I see:
>
> However, if your goal is to set up a VPN, t
DaleCo Help Desk wrote:
>
> From: "John Bleichert" <[EMAIL PROTECTED]>
> To: "Rotaru Razvan" <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Thursday, October 31, 2002 8:45 AM
> Subject: Re: regarding php installation
>
> > On Thu, 31 Oct 2002, Rotaru Razvan wrote:
> >
> > > Date: Thu, 31 O
Hello,
I have installed FreeBSD 4.7 on an IBM Thinkpad T20. But I can't get
X-Windows to start up on it. I keep getting the "No Screens Found" error.
The Thinkpad has a Savage/Mx video card with 4MB of video memory.
Has anyone else run into this problem before ? I would appreciate help on
this
On Thursday 31 October 2002 10:37 am, Wayne Pascoe wrote:
> Hi all,
>
> I'm struggling to setup a VPN. I'm now reading through
> http://www.daemonnews.org/200101/ipsec-howto.html
> and this is confusing me even more :(
>
> Reading this, I see:
>
> However, if your goal is to set up a VPN, that is,
Jim Durham <[EMAIL PROTECTED]> writes:
> I have this running. I made a couple .sh files, which I placed in
> /usr/local/etc/rc.d . Here is what they look like. They should answer
> your questions, hopefully.. xxx.xxx.xxx.xxx is the IP of the host
> that is running this file, yyy.yyy.yyy.yyy is
Up to a certain point (4.1 or so) it was possible to get a WL200 (which is
a WL100 wireless pcmcia with a PD6729 pcmcia<->pci bridge afaik) to work
on FreeBSD.
In 4.7 and -CURRENT it consistently will either hang at boot, hang after
detection or not function, whilst emmitting wi0 watchdog timeout
"KD Rajkumar" <[EMAIL PROTECTED]> writes:
> Hello,
>
> I have installed FreeBSD 4.7 on an IBM Thinkpad T20. But I can't get
> X-Windows to start up on it. I keep getting the "No Screens Found"
> error. The Thinkpad has a Savage/Mx video card with 4MB of video memory.
>
FWIW, a quick web-search
From.MR.AKU WILLISON DUKE.
Lot 140 Petit Marche,
10 Bp. Abidjan 10,Koumassi,
Cote d' Ivoire,West Africa.
Dear,
REQUEST FOR INVESTMENT ASSISTANCE.
Permit me to inform you of my desire of going into business
relationship with you. Introducing myself , I am MR.AKU
WILLISON DUKE the only son of the
On Thu, 31 Oct 2002, KD Rajkumar wrote:
> Date: Thu, 31 Oct 2002 16:03:03 +
> From: KD Rajkumar <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: FreeBSD 4.7 on IBM Thinkpad T20
>
> Hello,
>
> I have installed FreeBSD 4.7 on an IBM Thinkpad T20. But I can't get
> X-Windows to start up
(sorry, lost the exact subject...)
On Thu, Oct 31, 2002 at 11:03:22AM -0500, Jim Durham wrote:
> On Thursday 31 October 2002 10:37 am, Wayne Pascoe wrote:
> I have this running. I made a couple .sh files, which I placed in
> /usr/local/etc/rc.d . Here is what they look like. They should answer
> y
Dear freebsd experts,
I have set up a VPN with racoon/ipsec on Freebsd 4.7
using tunneling with ESP transport. By using the
setkey -D command, on my side the peer seems connected
while on the other direction no connection has been
established.
Pinging the other side is not possible from my point.
I
How would I go about starting GDM on boot. I looked through the handbook
and im unable to find documentation
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
I have a NIS server running on a -stable machine, and a client running -stable
too, everything is all ok
Now I'd like to add a new -current machine
after I set domainname, rpcbind, and run ypbind
I can use "ypcat" and "ypmatch" to check if I can connect to the server
but if I tried to login to the
Hello!
I have an "Intel V92 HaM Data Fax Voice" Modem. It is a hardware based
modem. Mi pnpbios recognizes it as "Simple COMM. controler IRQ12".
I would like to hack sio.c in order to get it working. Therefore I think I
should add an entry to pci_ids[] like:
{hex x, "Intel V92 HaM Data Fax Vo
Hi!
About this:
> I have an "Intel V92 HaM Data Fax Voice" Modem. It is a hardware based
> modem. Mi pnpbios recognizes it as "Simple COMM. controler IRQ12".
>
> I would like to hack sio.c in order to get it working. Therefore I think
I
> should add an entry to pci_ids[] like:
> {hex x, "Inte
On Thu, 31 Oct 2002, Pookie wrote:
> Date: Thu, 31 Oct 2002 08:56:37 -0800
> From: Pookie <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: FBSD and GDM startup?
>
> How would I go about starting GDM on boot. I looked through the handbook
> and im unable to find documentation
>
>
gdm and
On Thu, 31 Oct 2002, Ion Amigdalou wrote:
> Dear freebsd experts,
> I have set up a VPN with racoon/ipsec on Freebsd 4.7
> using tunneling with ESP transport. By using the
> setkey -D command, on my side the peer seems connected
> while on the other direction no connection has been
> established
From: "Pookie" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, October 31, 2002 10:56 AM
Subject: FBSD and GDM startup?
> How would I go about starting GDM on boot. I looked through the
handbook
> and im unable to find documentation
>
If all else fails, try cron:
@reboot /c
On Thu, 31 Oct 2002, Andres Aitsen wrote:
> Date: Thu, 31 Oct 2002 19:45:31 +0200
> From: Andres Aitsen <[EMAIL PROTECTED]>
> To: John Bleichert <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED]
> Subject: Re: FBSD and GDM startup?
>
> John Bleichert wrote:
> >
> > On Thu, 31 Oct 2002, Pookie wrote:
>
John Bleichert wrote:
>
> On Thu, 31 Oct 2002, Pookie wrote:
>
> > Date: Thu, 31 Oct 2002 08:56:37 -0800
> > From: Pookie <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: FBSD and GDM startup?
> >
> > How would I go about starting GDM on boot. I looked through the handbook
> > and im un
[EMAIL PROTECTED] wrote:
At 04:18 PM 10/31/2002 +, you wrote:
I have to slap my own hands - dumb.
I was not clear - When I say I have to switch languages, I am using
OpenOffice (trying to replace MS Ofc) and have to use text and graphics
in the same document. So, I don't think that I coul
Hello I have a strange problem with ppp.
I have a ADSL connection.
Since I installed 4.7 STABLE ppp looks like freezing from time to time
even if the tun0 interface is up
tun0: flags=8051 mtu 1492
inet 80.116.25.253 --> 192.168.100.1 netmask 0x
Opened by PID 69
anyway
I'm trying to boot from a flash with the file system loaded into an MFS
filesystem. This is what the /boot/loader.rc looks like:
---
load /kernel
load -t mfs-root /mfsroot
autoboot 0
---
The flash boot partition contains these files
/
kernel.gz
mfsroot.gz
boot/
loader
loader.
On Tuesday 29 October 2002 20:53, Michael Joyner wrote:
> > Not on this box. I get a lot of distortions using mplayer playing
> > DivX-files
> > (encoded with mencoder), while divxPlayer does it nicely... if it don't
> > core-dumps, that is.
> distortions? what kind?
Like mplayer can't display th
On 2002-10-31 02:03, TooMany Mirrors <[EMAIL PROTECTED]> wrote:
> Ok, so I have a couple of questions [...]
Don't post many questions in one message. Answering one question in a
message is ok, but trying to answer many is usually the cause of long,
twisted and complicated threads.
> I dual boot
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>> (10.31.2002 @ 1110 PST): Bjarne Wichmann Petersen said, in 0.9K: <<
> Like mplayer can't display the frames fast enough. Eg. looks like frame X gets
> displayed but halfway down frame X+1 takes over. Or perhaps some sort
> stop'n'go (ie. tiny "sto
On Thu, Oct 31, 2002 at 03:01:57PM +0300, Vasily wrote:
> Hi All,
>
> Every 5 minutes I can see the message about vmemoryuse.
> It's from logs:
> Oct 29 01:25:00 mybsd /usr/sbin/cron[517]: getting vmemoryuse resource limit:
>Invalid argument
> Oct 29 01:30:00 mybsd /usr/sbin/cron[520]: getting vm
I found a lightweight web server named "reptile". It supports Python
and PHP and has a good (ie, non-copyleft) license.
IIRC, I found it among a list of many web servers which support Python
(and/or ZOPE?) a link or two off the python.org home page.
To Unsubscribe: send mail to [EMAIL PROTECTED]
On Thu, Oct 31, 2002 at 05:50:33AM -0600, Bryan Cassidy wrote:
> I type "dmesg" and get this output. I didn't get this before. Could someone tell me
>what this means?
>
>
> fd0c: hard error writing fsbn 1 of 1-3 (No status)
> fd0c: hard error writing fsbn 7 of 7-9 (No status)
> fd0c: hard error
On Thursday 31 October 2002 20:13, Adam Weinberger wrote:
> > Like mplayer can't display the frames fast enough. Eg. looks like frame X
> > gets displayed but halfway down frame X+1 takes over. Or perhaps some
> > sort stop'n'go (ie. tiny "stops" in the flow).
> Run mplayer with the -framedrop opt
it seem that when i used a jail the ircd couldn t resolve hostname (but dns
work fine) anyone has any idea to fix that problem ?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
[EMAIL PROTECTED] writes:
> I need to switch languages (English, French, Italian) very often within
> the same document. Is there some way to switch keyboard layouts on
> FreeBSD quickly and painlessly as can be done on Windows?
Quickly and painlessly? Ha Ha. Not until you set things up on your
On Thu, 31 Oct 2002, Bjarne Wichmann Petersen wrote:
>
> BTW: Do you know how to rebuild index' in divx-files permanently? The
> man-pages says I can do this with mencoder... but I can't find any mention on
> *how*?
mencoder -idx input.avi -ovc copy -oac copy -o output.avi
It is in the mplayer
It's been a few months since I did a FreeBSD install, and I'm having more
trouble getting X going than I did before. Actually it's not X
specifically... I think I'm ok there (it starts)... but getting
Enlightenment going as my wm. I installed 4.7-Release and XFree86 4.2.0
(from ports). I tried to i
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>> (10.31.2002 @ 1130 PST): Scott I. Remick said, in 2.1K: <<
> about no Freetype. So I installed Freetype2 2.1.2 from ports. But it doesn't
> seem to make Enlightenment happy:
>
> checking for freetype.h... no
> checking for freetype/freetype.h... no
Hi,
how can I prevent automatic updating of routing tables where one of the
flags has "D" (Dynamic). I tried to put
routed: ALL: deny in /etc/hosts.allow, but somehow I still got entries in
routing table.
Thank you!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-q
I was trying to build VIM on my webserver, and it started to build the X
version, downloading all the X libraries, etc. This is a lights out
machine, so I didn't want X on it, so I killed the build. I eventually
figured out that by putting:
WITHOUT_X11=1
somewhere near the beginning of my Makef
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>> (10.31.2002 @ 1313 PST): Soren Harward said, in 0.7K: <<
> I was trying to build VIM on my webserver, and it started to build the X
> version, downloading all the X libraries, etc. This is a lights out
> machine, so I didn't want X on it, so I kill
you can usually set compile time options in the environment
before invoking make
i.e.
export WITHOUT_X11=true
make
Quoting Soren Harward <[EMAIL PROTECTED]>:
> I was trying to build VIM on my webserver, and it started to build the X
> version, downloading all the X libraries, etc. This is a lig
On Thu, Oct 31, 2002 at 02:13:37PM -0700, Soren Harward wrote:
> "you know, theres gotta be a better way to set these options than
> editing the Makefile". What is the "best common practice" to set
> these options?
make -DWITHOUT_X11
For pararmeters whose value is important, say something like:
Hi,
-- Problem:
Separating OS from underlying data. Which parts of the BSD OS are not part
of the initial, never modified OS? Or, which pieces of the OS change due to
useage.
-- Goal:
To have a slightly modified BSD OS structure where the OS can be upgraded,
yet the variable data remains the un
Steve Warwick wrote:
> Hi,
Hi Steve!
> -- Problem:
> Separating OS from underlying data. Which parts of the BSD OS are
> not part of the initial, never modified OS? Or, which pieces of the
> OS change due to useage.
>
> -- Goal: To have a slightly modified BSD OS structure where the OS
> can be up
[Addendum]
Cvsup / makeworld: I apologize for missing that piece of information
Yes, I could use the usual update procedure, however, this is a production
machine. So my thought is: build a new OS on a staging machine, add required
symlinks, pull the drive (sled) and slot it into the production m
Steve Warwick <[EMAIL PROTECTED]> writes:
> [Addendum]
>
> Cvsup / makeworld: I apologize for missing that piece of information
>
> Yes, I could use the usual update procedure, however, this is a production
> machine. So my thought is: build a new OS on a staging machine, add required
> symlinks
Steve Warwick wrote:
[Addendum]
Cvsup / makeworld: I apologize for missing that piece of information
Yes, I could use the usual update procedure, however, this is a production
machine. So my thought is: build a new OS on a staging machine, add required
symlinks, pull the drive (sled) and slot it
> -- Problem:
> Separating OS from underlying data. Which parts of the BSD OS are not part
> of the initial, never modified OS? Or, which pieces of the OS change due to
> useage.
>
> -- Goal:
> To have a slightly modified BSD OS structure where the OS can be upgraded,
> yet the variable data remain
Hello everybody!
Help me please. What is this:
lizard named[63]: deleting interface [194.44.39.40].53
This message appears sometimes while I browse in the inet.
And after that I can use only IP addresses in my browser :(
Here is output of ifconfig:
~# ifconfig tun0
tun0: flags=8051 mtu 1500
On Fri, Nov 01, 2002 at 01:48:13AM +0200, Anton wrote:
> Hello everybody!
>
> Help me please. What is this:
>
> lizard named[63]: deleting interface [194.44.39.40].53
>
> This message appears sometimes while I browse in the inet.
> And after that I can use only IP addresses in my browser :(
>
>
Hi guys, me again :)
well I've been reading up on compiling a kernel for nat and ipfw. I'm
running a d-link 704 router now. I want some input here...
I have an extra box (p200 - 128ram) for a router firewall..
I was thinking about it being my Gateway/Router/Firewall for my other 3
computers.
> Hi guys, me again :)
> well I've been reading up on compiling a kernel for nat and
> ipfw. I'm running a d-link 704 router now. I want some input here...
>
> I have an extra box (p200 - 128ram) for a router firewall..
> I was thinking about it being my Gateway/Router/Firewall for
> my oth
One advantage is you can keep you current subnet and with the freebsd box
you could run a whole another subnet with it .. or it can be used just to
learn and play.
But with a dlink already in the network Iwould use it as a play thing and
try new things on that box. I like to use p1 and below for sm
On Thu, 31 Oct 2002, RD wrote:
> Hi guys, me again :)
> well I've been reading up on compiling a kernel for nat and ipfw.
> I'm running a d-link 704 router now. I want some input here...
>
> I have an extra box (p200 - 128ram) for a router firewall.. I was
> thinking about it being my Gateway/
advantages:
more control with freebsd, those little broadband *magic* boxes are full of
black magic, they are pure evil ;)
unless you have a very cool little black magic box, you probable can't do
vpn, tunneling with GRE, using any routing protocol such as BGP, RIP, OSPF
and so on
bandwidth limitin
On Thu, 31 Oct 2002, at 17:28 [=GMT-0700], Nick Rogness wrote:
> On Thu, 31 Oct 2002, RD wrote:
> > How do I connect this? Do I use 2 eithernets 1 to net and 1 to a hub? I
> > also have 1 crossover rj45 cable for card to card connection that I
> > haven't tried yet...
>
> Yes, 2 ethernet ca
Hi,
Having a problem that we can't figure out. 2 different people
installed machines, one is working fine, the other gives :
Oct 31 00:07:34 lodur1 sendmail[47337]: File descriptors missing on startup: std
in, stderr; Bad file descriptor
constantlyCan't figure out why... Bina
On Fri, 2002-11-01 at 11:48, Tuc wrote:
> Hi,
>
> Having a problem that we can't figure out. 2 different people
> installed machines, one is working fine, the other gives :
>
> Oct 31 00:07:34 lodur1 sendmail[47337]: File descriptors missing on startup: std
> in, stderr; Bad file descriptor
Hi,
On Fri, 1 Nov 2002 12:27, Paul English wrote:
> acd0: MODE_SENSE_BIG command timeout - resetting
> ata1: resetting devices .. done
>
> I thought that this was fixed in a 4.7-PRERELEASE according to the 4.6
> errata?
It depends on which brand cd-rom drive you have as to wether it is
supported
On Thu, 31 Oct 2002 14:32:40 +0200
Lefteris Tsintjelis <[EMAIL PROTECTED]> wrote:
> > I've done this now with NO_OPENSSH=true in make.conf, but I *still*
> > get errors!
> >
> I had the exact same results when I tried NO_OPENSSH=true. Kernel
>
How can I get FreeBSD 4.7-stable to log password ssh login attempt failures? Googling
shows people last year added it via a patch to /etc/security but I wonder if it's been
added to base now.
Work like you don't need the money
Dance like nobody's watching
Love like you've never been hurt
To Un
On Thu, Oct 31, 2002 at 11:29:14PM -0500, Steve Wingate wrote:
> How can I get FreeBSD 4.7-stable to log password ssh login attempt
> failures? Googling shows people last year added it via a patch to
> /etc/security but I wonder if it's been added to base now.
What about the traces in /var/log/aut
>
> On Thu, Oct 31, 2002 at 11:29:14PM -0500, Steve Wingate wrote:
> > How can I get FreeBSD 4.7-stable to log password ssh login attempt
> > failures? Googling shows people last year added it via a patch to
> > /etc/security but I wonder if it's been added to base now.
>
> What about the traces
On Fri, Nov 01, 2002 at 12:04:51AM -0500, Steve Wingate wrote:
> >
> > On Thu, Oct 31, 2002 at 11:29:14PM -0500, Steve Wingate wrote:
> > > How can I get FreeBSD 4.7-stable to log password ssh login attempt
> > > failures? Googling shows people last year added it via a patch to
> > > /etc/security
I'm getting the following error repeated to the screen when the 4.7
install boot reaches ata:
acd0: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. done
I thought that this was fixed in a 4.7-PRERELEASE according to the 4.6
errata?
I tried the fix on the 4.6 errata webpage
I upgraded a box from 4.6 to 4.7 that is not in production yet. This was
my first time upgrading via CVS and make world and everything appeared to
go smoothly with no issues.
However, the following day I received mail from the daily periodic scripts
Security Run Output:
Checking setuid files and
On Thu, 2002-10-31 at 07:02, Andrew Boring wrote:
> I upgraded a box from 4.6 to 4.7 that is not in production yet. This was
> my first time upgrading via CVS and make world and everything appeared to
> go smoothly with no issues.
>
> However, the following day I received mail from the daily perio
I apologize for this repeat as I was following this issue on the last a
few months ago. I tried to find the thread but was not successfull.
There is a significant delay before ssh connects and returns a prompt.
I am on a private network, attempting a 192.168.0.XXX 192.168.0.YYY
connection.
On Thursday, Oct 31, 2002, at 21:58 US/Pacific, joe wrote:
I apologize for this repeat as I was following this issue on the last a
few months ago. I tried to find the thread but was not successfull.
There is a significant delay before ssh connects and returns a prompt.
I am on a private networ
On Fri, 1 Nov 2002 16:58, joe wrote:
> There is a significant delay before ssh connects and returns a prompt.
> I am on a private network, attempting a 192.168.0.XXX 192.168.0.YYY
> connection. There is a distinct 1:15 min delay before the password
> prompt appears. I have included the log of a
On October 31, 2002 10:12 pm, Jacob Rhoden wrote:
> On Fri, 1 Nov 2002 16:58, joe wrote:
> > There is a significant delay before ssh connects and returns a
> > prompt. I am on a private network, attempting a 192.168.0.XXX
> > 192.168.0.YYY connection. There is a distinct 1:15 min delay
> > before
Sounds like a DNS issue to me! :)
You need to setup a local bind that will resolve and reverse resolve
all your private #'s
Quoting joe <[EMAIL PROTECTED]>:
> On October 31, 2002 10:12 pm, Jacob Rhoden wrote:
> > On Fri, 1 Nov 2002 16:58, joe wrote:
> > > There is a significant delay before ssh
I just recently had that problem also. It was a dns problem, my firewall
uses dhcp and the dns server was changed by the isp, but my other box
didn't
get the change. I would agree the best is to set up a local bind.
> > Sounds like a DNS issue to me! :)
> >
> > You need to setup a local bind
Giorgos Keramidas wrote:
>
> On 2002-10-30 19:12, Chris Pressey <[EMAIL PROTECTED]> wrote:
> > On Wed, 30 Oct 2002 23:41:49 +0200
> > Giorgos Keramidas <[EMAIL PROTECTED]> wrote:
> > > + Remove everything under /usr/obj.
> > >
> > > # chflags -R noschg /usr/obj
> > > # rm -fr /usr/obj/*
>
1 - 100 of 103 matches
Mail list logo