No clue. That's why I am talking to you guys.
Go to Apple menu > About This Mac > More Info
This will open the utility System Profiler.
Look under the tab "PCI Cards" and copy that information back into
your reply.
OK. Sorry about the Swedish. This makes sense?
Typ:usb
Drivrutin ins
On Jan 9, 2010, at 7:59 AM, Gottick International wrote:
OK. Sorry about the Swedish. This makes sense?
Typ:usb
Drivrutin installerad: Ja
Buss: PCI
Kortplats: SLOT-2
Tillverkar-ID: 0x1045
Enhets-ID: 0xc861
Delsystemstillverkar-ID: 0x1045
Delsystems-ID: 0xc861
Revisio
On Jan 9, 2010, at 8:29 AM, Bill Connelly wrote:
On Jan 9, 2010, at 7:59 AM, Gottick International wrote:
OK. Sorry about the Swedish. This makes sense?
Typ:usb
Drivrutin installerad: Ja
Buss: PCI
Kortplats: SLOT-2
Tillverkar-ID: 0x1045
Enhets-ID: 0xc861
Delsystemstillverk
On Jan 9, 2010, at 8:33 AM, Bill Connelly wrote:
On Jan 9, 2010, at 7:59 AM, Gottick International wrote:
Typ:usb
Drivrutin installerad: Ja
Buss: PCI
Kortplats: SLOT-2
Tillverkar-ID: 0x1045
Enhets-ID: 0xc861
Delsystemstillverkar-ID:0x1045
Delsystems-ID: 0xc861
Rev
Typ:usb
Drivrutin installerad: Ja
Buss: PCI
Kortplats: SLOT-2
Tillverkar-ID: 0x1045
Enhets-ID: 0xc861
Delsystemstillverkar-ID:0x1045
Delsystems-ID: 0xc861
Revisions-ID: 0x0010
more info on this OPTi page says it should be compatible, AFAIK:
http://www.opti.com/ht
On Jan 8, 1:17 pm, Mike Linnett wrote:
> On 8 Jan 2010, at 19:31, Norm wrote:
>
> > When I type "reset nvram then reset all" it cycles back to open
> > firmware.
>
> Sorry if this sounds stupid, but just to be clear, you're typing them
> as seperate commands, so "reset nvram" (press enter)
On Jan 8, 2:31 pm, Norm wrote:
> My G4 gigabit has stopped working. snip
Using the two commands are entered separately. I have tried booting to
an install disk and having bare minimum installed. Holding down any
key combination's at start-up has no effect. I have no other video
card. The mac is
On Jan 9, 2010, at 6:43 AM, Bill Connelly wrote:
more info on this OPTi page says it should be compatible, AFAIK:
http://www.opti.com/html/usb1394.html
Perhaps removing it from your machine, starting the machine up and
running for awhile, then re-install the card would get the new OS X.
5
On Jan 9, 2010, at 11:14 AM, Norm wrote:
> My G4 gigabit has stopped working. I have an OWC 1000gz processor and 2
> gigabytes of ram. Also an ATI 9800 mac pro video board. When it turns on the
> power button does nothing. It will boot into open firmware. When I type
> "reset nvram then reset
My G4 gigabit has stopped working. I have an OWC 1000gz processor and 2
gigabytes of ram. Also an ATI 9800 mac pro video board. When it turns on
the power button does nothing. It will boot into open firmware. When I
type "reset nvram then reset all" it cycles back to open firmware. If I
type "b
On Jan 9, 2010, at 12:14 PM, Norm wrote:
Update: I hold down the "T" key and now have a screen with a
nuclear sign.
OK, A) thats a firewire logo, and B) about replacing the Mac, you
just need to go to the store and by a new one. I think you need to
reinstall the OS first before you go an
The OWC processor upgrade had a special pram and nvram update procedure -
go to OWC and search for the card and procedure may need to email/call
tech support
I remember this being an issue when I had to replace my logic board and
could not find the right version from my 1.5 GHz sonnet.
I burn
> >> Also, if necessary, you remove the bezel from the front of the new drive.
> >
>
>
> For what it's worth I have a G4 MDD that I have installed two Pioneer drives
> in. The Liteon Pioneer and Samsung are all the same when it comes to the
> bezel on the tray, they MUST be removed to opera
13 matches
Mail list logo