!!!
-Original Message-
>From: "Jesse St.John"
>Sent: Mar 7, 2012 1:38 PM
>To: g3-5-list@googlegroups.com
>Subject: Re: Overclocked MDD
>
>how are you effectively cooling these as my mdd runs relatively hot
>already? and i would lke to do this but i am a chicken an
At 20:00 -0800 3/7/12, Wayne Stewart wrote:
>According to iStat pro I'm running 2 degrees Celsius hotter at idle
>with both processors running. Using CHUD tools to turn on nap dropps
>my idle temp about 20 degrees C.
>At 1.5ghz there wasn't any problems. 1.58 is new to me so I'll be
>keeping an eye
According to iStat pro I'm running 2 degrees Celsius hotter at idle
with both processors running. Using CHUD tools to turn on nap dropps
my idle temp about 20 degrees C.
At 1.5ghz there wasn't any problems. 1.58 is new to me so I'll be
keeping an eye on the temp. If I get worried I'll see about add
I tried the first one without luck but I was a bit tired and may have
made an error. I'll try again in a day or two when I"m more rested
Wayne
On Mar 6, 11:30 pm, Kris Tilford wrote:
> I just realized your MDD is dual-CPU. This will likely require a
> slightly different patch because the G4 Mini
how are you effectively cooling these as my mdd runs relatively hot
already? and i would lke to do this but i am a chicken and i dont
want to ruin a good thing. i witnessed online a gentlemen who showed
me the resistors on the cpu chip itself to adjust, but decided not to
do it until i ha
I just realized your MDD is dual-CPU. This will likely require a
slightly different patch because the G4 Mini is single CPU. The line
in the patch "dev PowerPC,G4@0" would likely need an additional CPU
which I'd guess would probably be identified as "G4@1"? I don't know
the nuances of Open
On Mar 6, 2012, at 11:01 PM, Wayne Stewart wrote:
I've been trying to do something with a MDD that was a little beyond
it so I overclocked a 1.42 to 1.5ghz. That wasn't quite enough so I
tried for 1.58ghz.
System Profiler is saying 1.5ghz. Xbench tests seems to be showing the
correct amount of s
I've been trying to do something with a MDD that was a little beyond
it so I overclocked a 1.42 to 1.5ghz. That wasn't quite enough so I
tried for 1.58ghz.
System Profiler is saying 1.5ghz. Xbench tests seems to be showing the
correct amount of speedup though it's also saying I have 1.5ghz
processo
