can you provide some more description of your setup ?
thanks
anupam
wrivera [EMAIL PROTECTED] writes:
After running net-setup eth0 on the livecd, I am unable to reach an
outside address. I can ping my router and other machines on my network
but I can not get anoutside connection. Does anyone
Hi Canek,
1. I haven't used gnome for ages and I don't know the answer to that.
2. If you use xfs (X font server), did you change the catalog of font
directories in the file/etc/X11/fs/config? After changing that
execute 'fc-cache -f' and you should be ok.
3. To get the system to shutdown
Hey All,
I just upgraded MySQL to version 4 and it appears to have been seemless
with one exception...
Some of my utilities (namely, courier-imap's authvchkpw and mod_php)
wouldn't start because they couldn't locate libmysqlclient.so.10. I was
able to get around that by linking that to
Attaching the .config file of the kernel you want to use would be most
helpful in detecting the problem. I have compiled about 7 different
kernel versions even the latest development-sources (2.6.0.pre1) which I
use for a weel now and never had such problem.
Some things you could try before
Hi,
How can I get those tools to update to libmysqlclient.so.12 directly? Is it
as simple as re-emerging those two components? Should I worry that other
things are also using those and if so how do I tell?
I think the utility revdep-rebuild does the trick, it's part of the gentoolkit
package
Just to clarify about ee...
ee stands for enterprise edition. Java comes in three editions:
micro edition (intended for use in mobile devices), standard edition
(intended for running standalone applications, this is the one you will
likely be using) and enterprise edition (intended for
Hi!
updating dev-perl/PDL from 2.4.0 to 2.4.0 fails here during the
removal of the old package. Output:
Regenerating /etc/ld.so.cache...
dev-perl/PDL-2.4.0-r1 merged.
dev-perl/PDL
selected: 2.4.0
protected: 2.4.0-r1
omitted: none
Packages in red are slated for removal.
On Sunday 27 Jul 2003 12:13, Frank Hellmuth wrote:
dir /usr/doc/PDL-2.4.0/html/PDL
dir /usr/doc/PDL-2.4.0/html
dir /usr/doc/PDL-2.4.0
Traceback (most recent call last):
File /usr/bin/emerge, line 1993, in ?
mydepgraph.merge(mydepgraph.altlist())
File
Hi all,
I just had to restore my root filesystem from a partimage backup (a power cut
whilst I was trying to encrypt it...) and was shocked when I boot that it
couldn't find libstdc++.so.5, which is needed for most things it seems,
including python.
I checked and the file existed fine, just
On Sun, 27 Jul 2003 13:13:38 +0200
Frank Hellmuth [EMAIL PROTECTED] wrote:
dev-perl/PDL
selected: 2.4.0
protected: 2.4.0-r1
omitted: none
Packages in red are slated for removal.
Packages in green will not be removed.
[...]
dir /usr/doc/PDL-2.4.0/html/PDL
Hi,
I am trying gentoo out as a general purpose web and mail server and
while trying to emerge squirrelmail-1.4.1 I keep getting the following
dependency problem.
mumia root # emerge -p squirrelmail
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild
Sorry missed out the USE flags
Hi,
I am trying gentoo out as a general purpose web and mail server and
while trying to emerge squirrelmail-1.4.1 I keep getting the following
dependency problem.
mumia root # emerge -p squirrelmail
These are the packages that I would merge, in order:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 27 July 2003 3:00 pm, Jim Bailey wrote:
Hi,
I am trying gentoo out as a general purpose web and mail server and
while trying to emerge squirrelmail-1.4.1 I keep getting the following
dependency problem.
mumia root # emerge -p
hi,
that make me sad, why want the htmldoc packe X?
debian root # USE= -fltk -X -opengl emerge -vp htmldoc
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild N ] x11-base/xfree-4.3.0-r2 -3dfx -sse +mmx +3dnow +xml
+truetype +nls -cjk -doc
On Sunday 27 July 2003 3:00 pm, Jim Bailey wrote:
Hi,
I am trying gentoo out as a general purpose web and mail server and
while trying to emerge squirrelmail-1.4.1 I keep getting the following
dependency problem.
These are the use flags I am using though any or no combination of use
How do I unmerge a specific version of a package when I have several
versions of the package in question installed in parallel?
--
Sebastian Bergmann
http://sebastian-bergmann.de/ http://phpOpenTracker.de/
Das Buch zu PHP 5:
On Sun, 27 Jul 2003 17:23:22 +0200
Sebastian Bergmann [EMAIL PROTECTED] wrote:
How do I unmerge a specific version of a package when I have several
versions of the package in question installed in parallel?
emerge unmerge categorie/package-version.
For example:
emerge unmerge
Am Sonntag, 27. Juli 2003 15:00 schrieb el lodger:
Frank,
I got the same error yesterday. This morning I synced and emerged some
new updates and at the end it did the clean-up of PDL-2.4.0 without any
errors all by itself.
Thanks, another emerge sync emerge -u PDL worked whithout problems.
Jim Bailey wrote:
On Sunday 27 July 2003 3:00 pm, Jim Bailey wrote:
Hi,
I am trying gentoo out as a general purpose web and mail server and
while trying to emerge squirrelmail-1.4.1 I keep getting the following
dependency problem.
These are the use flags I am using though any or no combination
Ian Truelsen wrote:
emerge unmerge categorie/package-version.
Thank you,
Sebastian
--
Sebastian Bergmann
http://sebastian-bergmann.de/ http://phpOpenTracker.de/
Das Buch zu PHP 5: http://professionelle-softwareentwicklung-mit-php5.de/
--
[EMAIL PROTECTED] mailing list
Hello,
I am trying to emerge php without all the XFree dependencies, but I can't
get it to work.
$ USE=-X -XFree -xlibs -freetype -x11 emerge --pretend php
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild N ] dev-perl/XML-Parser-2.31-r1
[ebuild N
begin quote
On Sun, 27 Jul 2003 19:05:53 +0200
Øyvind Stegard [EMAIL PROTECTED] wrote:
Hello,
I am trying to emerge php without all the XFree dependencies, but I
can't get it to work.
$ USE=-X -XFree -xlibs -freetype -x11 emerge --pretend php
These are the packages that I would merge, in
hi,
ahhm thats my fault. I thought htmldoc is only a command tool, but i saw
too late that it is a gui tool.
sorry
On Sun, 2003-07-27 at 16:44, Denny Schierz wrote:
hi,
that make me sad, why want the htmldoc packe X?
--
cu denny
Gnupg key can be found under pgp.mit.edu, key ID
Yup, I missed the -qt USE flag because /etc/make.conf was upgraded and I
forgot to restore some of my old prefs. And yes, I know mod_php is what I
need together with apache =). Thanks for the help.
Øyvind Stegard
- Original Message -
From: Spider [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
On Friday 25 July 2003 13:54, Asgodom Woldu wrote:
I added the nameservers during the eth0 configuration process (using
'net-setup eth0' and selecting the static IP option), and i was able to
ping 'www.yahoo.com', etc. However, 'emerge sync' still gives me the same
error message, even after i
On Friday 25 July 2003 15:03, Andrew Gaffney wrote:
Chris Bare wrote:
Is there an open source (or free) program available that will let you
create a floor plan and then do a 3d walk-through?
take a look at http://www.cycas.de
It's a 2D/3D drafting program that can output to POV-Ray.
The
Steven Elling wrote:
On Friday 25 July 2003 15:03, Andrew Gaffney wrote:
Chris Bare wrote:
Is there an open source (or free) program available that will let you
create a floor plan and then do a 3d walk-through?
take a look at http://www.cycas.de
It's a 2D/3D drafting program that can output to
I have googled for an answer and all the normal first steps, but I am at
a small impass.
I have an HP 722C attached to a Win2k box on the LAN. Up until about 2
days al was good. Printing worked without a hitch.
I upgraded using the dreaded -u (which never bit me before) a few newer
packages
Sebastian Bergmann wrote:
How do I unmerge a specific version of a package when I have several
versions of the package in question installed in parallel?
Along with the other response, bear in mind the following usage
emerge --prune packagename
or short
emerge -P packagename
Do emerge
Hi,
On Saturday 26 July 2003 23:11, Stephane Brossier wrote:
Hi,
I installed gentoo a while ago already.
The first part of the boot goes fine, and then when it switches
to level 5, my screen becomes gray for at least one or two minutes
before i can see the X login screen. It is working
Hi,
[IGNORE THE PREVIOUS MAIL. I CLICKED 'SENT' BY MISTAKE
BEFORE I COULD FINISH IT. SORRY...]
On Saturday 26 July 2003 23:11, Stephane Brossier wrote:
Hi,
I installed gentoo a while ago already.
The first part of the boot goes fine, and then when it switches
to level 5, my screen becomes
Steven Elling [EMAIL PROTECTED] wrote:
On Friday 25 July 2003 13:54, Asgodom Woldu wrote:
I added the nameservers during the eth0 configuration process (using
'net-setup eth0' and selecting the static IP option), and i was able to
ping 'www.yahoo.com', etc. However, 'emerge sync' still gives
Hi!
In order to get my scanner (HP 3400c) working i have to apply a patch to
media-gfx/sane-backends.
I'm new to gentoo and a bit lost.
I was thinking that first I copy the media-gfx/sane-backends directory
to /usr/local/portage.
Then I copy sane-backends-1.0.11.ebuild to
Actually, you need to add the PORTDIR_OVERLAY variable to
/etc/make.conf...
On Sun, 2003-07-27 at 16:29, Niklas Koponen wrote:
Hi!
In order to get my scanner (HP 3400c) working i have to apply a patch to
media-gfx/sane-backends.
I'm new to gentoo and a bit lost.
I was thinking that
Hello Niklas,
On Sun, 27 Jul 2003 23:29:51 +0300
Niklas Koponen [EMAIL PROTECTED] wrote:
...
I was thinking that first I copy the media-gfx/sane-backends
directory to /usr/local/portage.
Then I copy sane-backends-1.0.11.ebuild to
sane-backends-1.0.11-r1.ebuild.
Then I add the patching
Sorry, misread. *slaps self with frying pan*
On Sun, 2003-07-27 at 17:03, Bryan D. Stine wrote:
Actually, you need to add the PORTDIR_OVERLAY variable to
/etc/make.conf...
On Sun, 2003-07-27 at 16:29, Niklas Koponen wrote:
Hi!
In order to get my scanner (HP 3400c) working i have to
Hi,
I have some MPG videos which I want to burn with K3B. So I create a
new video project, drag the MPG file to it, and K3B gives me the
message that the MPG file already has to be in VCD format. How can I
find out if the file is already in VCD format ?
If the file is already in VCD format, is
How can I get those tools to update to libmysqlclient.so.12 directly? Is it
as simple as re-emerging those two components? Should I worry that other
things are also using those and if so how do I tell?
I think the utility revdep-rebuild does the trick, it's part of the
gentoolkit
package if I
Hello,
I would like to know if a documentation to install gphoto2 with hotplug
(under Gentoo) exists ?
What is the purpose of /etc/init.d/hotplug ? When I run it, I have the
following error :
hotplug script /etc/hotplug/pci.rc failed at start
The documentation on the Gphoto2 about hotplug
Hi,
I want to start up my ADSL connection at boot time, or maybe give the
users permission to start it for themselves (so I wouldn't have to su
every time). Are there any scripts available on the web to do this?
Thanks.
--
Molnar Peter [EMAIL PROTECTED]
--
[EMAIL PROTECTED] mailing list
Is there any way to fine out which packages depend on a package?
--
Stephen
From here to there
and there to here,
funny things are everywhere. -- Dr Seuss
--
[EMAIL PROTECTED] mailing list
On 18:53 Sun 27 Jul , Stephen Boulet wrote:
Is there any way to fine out which packages depend on a package?
emerge gentoolkit
man qpkg
--
[EMAIL PROTECTED] mailing list
On Monday 28 July 2003 06:27, D.J. Bolderman wrote:
I have some MPG videos which I want to burn with K3B. So I create a
new video project, drag the MPG file to it, and K3B gives me the
message that the MPG file already has to be in VCD format. How can I
find out if the file is already in VCD
Hi!
Is it possible to have a dual head linux frame buffer console with a
matrox G550 graphics card? XFree86 is working fine in dual head
mode, I just wonder if one can have tty1 on a different monitor than
tty2.
What kernel configure options are necessary, do I need special
programs / kernel
On 28/7/03 12:28 am, Molnar Peter [EMAIL PROTECTED] wrote:
Hi,
I want to start up my ADSL connection at boot time, or maybe give the
users permission to start it for themselves (so I wouldn't have to su
every time). Are there any scripts available on the web to do this?
I think that
I said earlier, I upgraded using the dreaded -u [...] and since then
printing is dead.
Disregard it. I fixed the problem. I just missed a line in the logs
that told me there was a missing libgimpprint.so.1 file. I did an
emerge gimp-print stopped and restarted cupsd and all is well with my
Have converted to the nvidia drivers. Looks ok, but glxgears will not
run:
Xlib: extension GLX missing on display :0.0.
Error: couldn't get an RGB, Double-buffered visual
After much googling, I don't see the answer.
I have
1. emerged nvidia-kernel and nvidial-glx (4363)
2.
Have converted to the nvidia drivers. Looks ok, but glxgears will not
run:
Xlib: extension GLX missing on display :0.0.
Error: couldn't get an RGB, Double-buffered visual
After much googling, I don't see the answer.
I have
1. emerged nvidia-kernel and nvidial-glx (4363)
2.
On Monday 28 July 2003 12:27, Collins Richey wrote:
3. XF86Config has
load glx (no load dri)
using driver 'nv'
'nv' is the xfree86 driver. The name of the nvidia driver is 'nvidia'. Change
you XF86Config to that and everything should work fine.
Jason
--
[EMAIL PROTECTED]
I've recently gotten Enemy Territory to work on my gentoo box (runs
swet)..
But for some reason I can only run it with sound from the command line.. (
with this : artsdsp -m et )
If I place this artsdsp -m et into a KDE menu shortcut, the game starts
without sound (same thing that
Hi,
I merged apache2 and it works fine, but the is that
I'm very non-familiar with apache so when I go to
apache.org to learn something from the docs, the stuff
is completely differenct (e.g. to start apache I'm
supposed to run /usr/local/apache2/bin/apachectl but
in gentoo that file doesn't even
51 matches
Mail list logo