A. Khattri [EMAIL PROTECTED] wrote:
Im talking about software RAID specifically. I would assume running
lvm2 (a software process) over software RAID would have more overhead
than just software RAID alone.
I'd say you do not need to worry about it (if you have at least 500MHz
cpu). SW-raid 0/1
On Wed, 21 Sep 2005 01:44:04 -0400 (EDT), A. Khattri wrote:
Im talking about software RAID specifically. I would assume running lvm2
(a software process) over software RAID would have more overhead than
just software RAID alone.
Your CPU and memory are so much faster than your hard drive that
On Wed, 21 Sep 2005 09:51:24 +0800, Ow Mun Heng wrote:
It seems that /opt/vmware/lib/bin/vmware-vmx must be setuid root and
someone filed this in bugzilla (#106291) already.
Thanks for the heads up.
(Lucky I've not upgraded, still at -r1)
I upgraded a couple of days ago and did not
-Original Message-
From: Nick Rout [mailto:[EMAIL PROTECTED]
Sent: 20 September 2005 22:33
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] CUPS: Sharing printers via IPP
HA!!! I just set up windows to print to cups direct (no samba) and may
be able to offer some
Hi,
I'm not an expert in ebuilds' issues, but /usr/portage/distfiles
(or whichever else one chooses for his/her own system) is availabe
through the variable DISTDIR (or is it DISTFILES? can't remember which
one exactly is and don't have gentoo available here). Hence, that
Hi folks,
I have installed gentoo on an x86 machine and in order to optimize memory and
speed, I added -ssl to the USE flags.
This makes kdeaddons fail to compile complaining about some KSSL_error (sorry
for the poor description, I am not in the same machine).
So I put ssl back but I can not
Pupeno wrote:
DEPEND=chicken mysql
should be:
DEPEND=dev-scheme/chicken
dev-db/mysql
RDEPEND=
Not sure, but I've often saw this:
RDEPEND=${DEPEND}
src_unpack() {
mkdir -p ${S}
cp /usr/portage/distfiles/${A} ${S}
}
mkdir isn't nessessary IIRC.
You also shouldn't have to
Christoph Gysin wrote:
You also shouldn't have to copy the egg. Does it get modified during
chicken-setup? If not, you can leave out the whole src_unpack().
Of course, you'll need to specify the path to the egg in chicken-setup.
Christoph
--
echo mailto: NOSPAM !#$.'*'|sed 's. ..'|tr * !#:2
Hi all
I'm having problem trying to emerge
gnome. A very short while after starting
I get the following error message
Downloading
ftp://ftp.sunet.se/pub/X11/GNOME/sources/libbonoboui/2.10/libbonoboui-2.10.0.tar.bz2
--10:38:48--
On Wed, 21 Sep 2005, Stewart Taylor wrote:
Hi all
I'm having problem trying to emerge
gnome. A very short while after starting
I get the following error message
Downloading
ftp://ftp.sunet.se/pub/X11/GNOME/sources/libbonoboui/2.10/libbonoboui-2.10.0.tar.bz2
--10:38:48--
Hello all,
I'm trying to:
# emerge =wine-20041019-r3
(this version seems to be recommended for several uses)
I get this error message:
In file included from /usr/include/alsa/asoundlib.h:48,
from alsa.h:23,
from audio_05.c:49:
/usr/include/alsa/conf.h:189:
did u configured your kernel for ALSA support + sound card module loaded + alsa working file?On 9/21/05, Jean Magnan de Bornier
[EMAIL PROTECTED] wrote:Hello all,I'm trying to:# emerge=wine-20041019-r3
(this version seems to be recommended for several uses)I get this error message:In file
to check your harddisk space type
#df -lh
On 9/21/05, Tamas Sarga [EMAIL PROTECTED] wrote:
On Wed, 21 Sep 2005, Stewart Taylor wrote: Hi all I'm having problem trying to emerge gnome. A very short while after starting I get the following error message
Downloading
hi,
yesterday i converted my sever from courier-imap - cyrus-imap. After
struggling with the messed ebuild in portaeg ( for others with the problem:
change emake - make, there is already a thread at bugzilla), it already
checks for spam transfers mail to the correct mail-folders. And btw: It's
Le 21 septembre à 12:37:24 Gentoo Shadow [EMAIL PROTECTED] écrit notamment:
| did u configured your kernel for ALSA support + sound card module loaded +
| alsa working file?
Yes; should they all be modules?
([EMAIL PROTECTED]:/usr/src/linux-2.6.12-gentoo-r6)# grep SOUND .config
CONFIG_SOUND=y
don't use de ALSA-DRIVER that come with de Linux kernel so u better to #emerge alsa-driver
simply type #emerge info AND SEND TO THE MAILLING LISTOn 9/21/05, Jean Magnan de Bornier [EMAIL PROTECTED] wrote:
Le 21 septembre à 12:37:24 Gentoo Shadow [EMAIL PROTECTED]
écrit notamment:| did u
Initially I emerged and used a gentoo-source IIRC kernel which worked
perfectly.
I then wanted to use the swsusp2 patch to the kernel. emerged a package
and in fact it was an entirely new kernel tree with the patches included.
The swsusp2 patches in this tree are not at the latest level and I
On 9/21/05, Patrick Marquetecken [EMAIL PROTECTED] wrote:
Hi,Whats the best to integrate linux users passwords with our existingWindows active domain, so that we can login with windows users and
passwords into our Llinux machines.Winbind or Ldap ?
To integrate with an ActiveDirectory you need
It seems there is now a complete mess with these two packages at ~x86.
I guess I should go either with one or another, but not with both.
If I try to emerge PEAR-PEAR, it asks me to get dev-lang/php-5.x to install PEAR-PEAR-1.3.6.
If I do so, I get back to those strange messages about blocking
Hardware: Thinkpad R52, pentium-m 1.73G,
Host: suspend2-sources-2.6.13-r4, vmware-workstation-4.5.2.8848-r7
Guest OS: Windows 2000 professional
The windows guest os is extemely slow. After double-click the date at
bottom-right corner and show the second hand of the clock, I find that
it cost more
Mark Knecht wrote:
it reboots? I don't expect that this should happen often, but I'd like
to know when it does.
setup ssmtp, install mail-client/mailx, then add this to
/etc/conf.d/local.start:
date|mail -s 'I just rebooted!' [EMAIL PROTECTED]
--
gentoo-user@gentoo.org mailing list
On 9/20/05, Neil Bothwick [EMAIL PROTECTED] wrote:
On Tue, 20 Sep 2005 13:50:28 +0200, Fernando Meira wrote: - I run emerge -pv depclean and I get a list where I find these: These are the packages that I would unmerge: media-libs/libmpeg3
selected: 1.5.2 protected: none omitted: none
Billy Holmes schreef:
Mark Knecht wrote:
it reboots? I don't expect that this should happen often, but I'd
like to know when it does.
setup ssmtp, install mail-client/mailx, then add this to
/etc/conf.d/local.start:
date|mail -s 'I just rebooted!' [EMAIL PROTECTED]
And you know,
What would be an accepted easy way, meaning not too much software
setup, etc., to get the machine to email my GMail account every time
it reboots? I don't expect that this should happen often, but I'd like
to know when it does.
Add a line to /etc/conf.d/local.start to either call a script
I mentioned this as a possible bug on the forums (http://forums.gentoo.org/viewtopic-t-381582-highlight-egroupware.html , as related to the latest version of egroupware), but someone blew me down without checking the facts out. In my not so humble opinion, if a package is fauling to emerge
Am Mittwoch, den 21.09.2005, 07:26 -0700 schrieb Mark Knecht:
Hi,
Yesterday my NFS server, used for MYthTV storage, but also a MythTV
frontend, seems to have spontaneously rebooted twice. After that all
recordings done for the rest of the day are bad.
What would be an accepted easy
On Wed, 21 Sep 2005 16:44:50 +0200, Holly Bostick wrote:
I just realized that I always turn this option (wherever it may be) off
(I think it's the kernel, which would explain why I don't remember
precisely where it is, since I configure all kernels to be the same as
the last, so I set it once
On Wed, 21 Sep 2005 16:36:59 +0200, Fernando Meira wrote:
If you installed it with portage, you should have it in world.
I've installed with portage, but with --oneshop option. This is because
(as Holly said) E17 packages need to be installed in proper order. So I
use a script to update
Qiangning Hong wrote:
Hardware: Thinkpad R52, pentium-m 1.73G,
Host: suspend2-sources-2.6.13-r4, vmware-workstation-4.5.2.8848-r7
Guest OS: Windows 2000 professional
The windows guest os is extemely slow. After double-click the date at
bottom-right corner and show the second hand of the clock,
Bob Alexander wrote:
Initially I emerged and used a gentoo-source IIRC kernel which worked
perfectly.
I then wanted to use the swsusp2 patch to the kernel. emerged a
package and in fact it was an entirely new kernel tree with the
patches included.
The swsusp2 patches in this tree are not at
Hi
Trivial yes, but easily overlooked. I
have 1.6 GB free and the file length is
correct.
Stewart
Very trivial question. Have you got enough freespace? Is the saved
file equal in size with the said by wget?
Cheers,
Tamas Sarga Sárga Tamás
--
Make the world
* On Sep 21 16:44, Holly Bostick (gentoo-user@lists.gentoo.org) wrote:
And you know, it just occurred to me-- isn't there a kernel option or
an
option somewhere that I can't remember right now, to enable or disable
auto-rebooting on severe errors/kernel panics, something like that?
[~] grep
Neil Bothwick wrote:
On Wed, 21 Sep 2005 16:44:50 +0200, Holly Bostick wrote:
I just realized that I always turn this option (wherever it may be) off
(I think it's the kernel, which would explain why I don't remember
precisely where it is, since I configure all kernels to be the same as
the
Richard Fish wrote:
The problem is probably because VMWare uses the processor TSC counter
for timing, the rate of which varies with the processor frequency.
The following works for me on a pentium-m 2.13ghz system:
1. Add processor.max_cstate=1 to your kernel boot options.
2. If you are
Well, dev-php is not compatible with dev-lang/php. You have to emerge
dev-php/php and dev-php/mod_php for apache support. If you emerge
dev-lang/php, you'll have both of them, and it will have support for
apache too.
I recommend you to emerge dev-lang/php instead of dev-php/php and
On Wednesday 21 September 2005 06:33, Christoph Gysin wrote:
Christoph Gysin wrote:
You also shouldn't have to copy the egg. Does it get modified during
chicken-setup? If not, you can leave out the whole src_unpack().
Of course, you'll need to specify the path to the egg in chicken-setup.
On 9/21/05, Rafael Fernández López [EMAIL PROTECTED] wrote:
Well, dev-php is not compatible with dev-lang/php. You have to emergedev-php/php and dev-php/mod_php for apache support. If you emergedev-lang/php, you'll have both of them, and it will have support forapache too.
I recommend you to
A. Khattri wrote:
On Wed, 21 Sep 2005, Richard Fish wrote:
The only problem with this is that when you unmerge old kernel
sources, emerge will refuse to remove any patched, backup, or object
files, so you have to go delete the remaining files manually. But I
think you end up having to do
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
R'twick Niceorgaw wrote:
Hi,
I read on gnome.org changelog for evolution 2.4 that it now supports
inline pgp signature/encryption.
However, when I installed it, couldn't find anywhere to select inline
signature. It is still signing as an attachment.
Hi,
I havent touched the OS for about a year, since it was installed
for me. I wanted to add some apps, but found problems with seemingly out of date
links, after doing a sync.
So, I've been trying the upgrade to 2005, though probably
did things in the wrong order until I found the
Any help appreciated.
/usr/x86_64-pc-linux-gnu/bin/ld: skipping incompatible
/usr/lib/gcc/x86_64-pc-linux-
gnu/../../libc.so when searching for -lc
Dude, I think your build chain is now in a 'hosed' state, probably as a
result of the migration that you were trying...
Since gentoo is a
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing happens at all. Does
anyone know why this is happening?
- Grant
--
gentoo-user@gentoo.org mailing list
On Wed, 21 Sep 2005, Richard Fish wrote:
I think you are correct, if I could ever remember to do it, or if it
would annoy me enough to warrant writing a script for it. :-)
Since ebuilds have preinstall and postinstall functions, it would be nice
if there were preunmerge and postunmerge
On 9/21/05, Neil Bothwick [EMAIL PROTECTED] wrote:
On Wed, 21 Sep 2005 16:36:59 +0200, Fernando Meira wrote: If you installed it with portage, you should have it in world. I've installed with portage, but with --oneshop option. This is because
(as Holly said) E17 packages need to be installed in
I have a script in /etc/cron.daily that never runs. It works properly
when run manually and it's been in there for weeks (and a reboot or two).
I'm using vixie-cron.
Anyone have any ideas?
Thanks,
Matt
--
gentoo-user@gentoo.org mailing list
On Wed, 2005-09-21 at 17:11 -0400, Matt Randolph wrote:
I have a script in /etc/cron.daily that never runs. It works properly
when run manually and it's been in there for weeks (and a reboot or two).
I'm using vixie-cron.
cron.daily doesn't get run from cron. gets run out of anacrondo
On Wed, 21 Sep 2005 16:15:04 -0500 John Jolet [EMAIL PROTECTED] wrote:
On Wed, 2005-09-21 at 17:11 -0400, Matt Randolph wrote:
I have a script in /etc/cron.daily that never runs. It works
properly when run manually and it's been in there for weeks (and a
reboot or two).
I'm using
On Wed, 2005-09-21 at 22:47 +0100, Peter Ruskin wrote:
On Wednesday 21 September 2005 22:15, John Jolet wrote:
On Wed, 2005-09-21 at 17:11 -0400, Matt Randolph wrote:
I have a script in /etc/cron.daily that never runs. It works
properly when run manually and it's been in there for weeks
On Wed, 21 Sep 2005 15:55:06 -0400 (EDT), A. Khattri wrote:
Since ebuilds have preinstall and postinstall functions, it would be
nice if there were preunmerge and postunmerge functions - then it would
be easy to re-write the kernel ebuilds to clean up after themselves.
Like these?
On Wed, 21 Sep 2005 12:56:13 -0700, Grant wrote:
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing happens at all. Does
anyone know why this is happening?
Is there
On Wed, 21 Sep 2005 23:03:53 +0200, Fernando Meira wrote:
Add them to world. As long as you don't do an automatic emerge -uD
world you shouldn't have a problem. When updates come out, you'll see
them in the output of emerge -pvD world (which you won't with your
current setup) then you can
I am sure I'll get flamed for this, but I am in need of a gmail account,
anyone have one to give?
Mike
--
Michael W. Holdeman
Powered by Gentoo Linux www.gentoo.org |
Kernel 2.6.11-ck8 |
Win4Lin 5-1-20 netraverse.com
On Wednesday September 21 2005 2:56 pm, Grant wrote:
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing happens at all. Does
anyone know why this is happening?
The
On Wednesday 21 September 2005 06:02 pm, Neil Bothwick wrote:
On Wed, 21 Sep 2005 12:56:13 -0700, Grant wrote:
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing
I keep getting this error,
error libsmb programs must not be setuid root?
This after upgrading samba. The config seems alright, I just can't mount any
shares due to this error.
Mike
--
Michael W. Holdeman
Powered by Gentoo Linux www.gentoo.org |
On Wed, 21 Sep 2005 17:11:33 -0400, Matt Randolph wrote:
I have a script in /etc/cron.daily that never runs. It works properly
when run manually and it's been in there for weeks (and a reboot or
two).
Does it not run or run and not do anything? The latter can be a path
problem, as the cron
On Wed, Sep 21, 2005 at 04:15:04PM -0500, John Jolet wrote:
On Wed, 2005-09-21 at 17:11 -0400, Matt Randolph wrote:
I have a script in /etc/cron.daily that never runs. It works properly
when run manually and it's been in there for weeks (and a reboot or two).
I'm using vixie-cron.
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing happens at all. Does
anyone know why this is happening?
Is there anything in vmware.log in the directory of that
Alle Wednesday 21 September 2005 04:09, Erick Michau ha scritto:
I can confirm the flaw for gentoo-sources-2.6.13-r2. The -r1 was good, though.
for the ck-sources look at:
http://packages.gentoo.org/packages/?category=sys-kernel;name=ck-sources
it's marked as bug # 106405 (already closed )
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing happens at all. Does
anyone know why this is happening?
The solution can be found in the Gentoo forums.
I can't
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing happens at all. Does
anyone know why this is happening?
Is there anything in vmware.log in the directory of
On Wed, 21 Sep 2005, Neil Bothwick wrote:
On Wed, 21 Sep 2005 15:55:06 -0400 (EDT), A. Khattri wrote:
Since ebuilds have preinstall and postinstall functions, it would be
nice if there were preunmerge and postunmerge functions - then it would
be easy to re-write the kernel ebuilds to
Can you recommend an external *USB* dialup PSTN modem, which will work
100-90% in Gento 2.6.13r1 ?
After failing to setup my laptop's mart link winmodem (it can't be done,
i'll have to wait), a USB modem is the only solution
Thank u in advance
--
gentoo-user@gentoo.org mailing list
heck I got 99 invites just collecting dust... :)
--
gentoo-user@gentoo.org mailing list
On Wednesday September 21 2005 5:54 pm, Grant wrote:
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing happens at all. Does
anyone know why this is happening?
On Wed, 21 Sep 2005 18:59:51 -0400 (EDT), A. Khattri wrote:
The gentoo-sources ebuilds dont seem to override them (for one thing, it
could remove modules for the kernel you're unmerging).
The kernel ebuilds only merge/unmerge the source code, they don't handle
compiled code, unlike most other
On 9/21/05, Joe Menola [EMAIL PROTECTED] wrote:
On Wednesday September 21 2005 5:54 pm, Grant wrote:
Hello, since updating to the latest vmware workstation 4.5 via
portage, I haven't been able to start my XP virtual machine. When I
click Start this virtual machine, nothing happens at
I have a script in /etc/cron.daily that never runs. It works properly
when run manually and it's been in there for weeks (and a reboot or two).
I'm using vixie-cron.
cron.daily doesn't get run from cron. gets run out of anacrondo you
have anacron installed?
Sorry, John, that's not
I'm having a problem doing an emerge --update world OR system on a new
system, just set up today using the minimal boot cd, downloading the
latest stage3 file for pentium 4, and the latest portage snapshot. It
seems to be dying on the build for glibc. trying to move xtrace.new to
xtrace (looong
On Wed, 21 Sep 2005 20:15:35 -0400
Dave Nebinger wrote:
I have a script in /etc/cron.daily that never runs. It works properly
when run manually and it's been in there for weeks (and a reboot or two).
I'm using vixie-cron.
cron.daily doesn't get run from cron. gets run out of
I'm considering moving to SATA and wanted some feedback from other Gentoo
users.
1. For SATA RAID what cards and drives do you recommend for a desktop
system running Gentoo. I will be doing some audio recording on a dual AMD
1.6 with 2 gig
of memory
2. If I went with SATA how much does
okay, I figured out why this is failing, can someone help me fix it? it
fails with this message: mv: cannot stat
`/var/tmp/portage/glibc-2.3.5-r1/work/build-deault-i686-pc-linux
-gnu-linuxthreads/debbug/xtrace.new': No such file or directory
anyone catch the problem? there IS NO debbug
I run a server running software RAID on SATA, performance is very
acceptable.
Yeah the SATA driver is not included in the default kernel
configuration, I messed around with that for a long time :)
Devraj
Brett I. Holcomb wrote:
I'm considering moving to SATA and wanted some feedback from
Hi everyone,
Looking breifly at the Gentoo Developer conference. I came across GenUX
(actually I have now downloaded and had a quick go at it). It seems to
me that they have put pre-built binaries on a LiveCD with a GUI front
end for their installer.
Has anyone tried it, if so what is your
I tried to transfer a large file (~300MB) to a windows machine from my
gentoo laptop:
# mount -t cifs //winbox/movies /mnt/samba -o iocharset=utf8,umask=
# exit
$ cp largefile.avi /mnt/samba
The transfer starts and eats 100% of my CPU. However, after transfered
~40MB of data, my linux system
On 9/21/05, Nick Rout [EMAIL PROTECTED] wrote:
Windows drivers are sometimes delivered as compressed with a now fairlyancient scheme. part of which is that the filename is truncated, and thelast letter of the extension replaced with a underscore.(Like
printer.ppd becomes printer.pp_)In windows 2k
On Thu, September 22, 2005 3:30 pm, Michael Crute said:
On 9/21/05, Nick Rout [EMAIL PROTECTED] wrote:
Windows drivers are sometimes delivered as compressed with a now fairly
ancient scheme. part of which is that the filename is truncated, and the
last letter of the extension replaced with a
On Wed September 21 2005 09:51 pm, Brett I. Holcomb wrote:
1. For SATA RAID what cards and drives do you recommend for a desktop
system running Gentoo. I will be doing some audio recording on a dual AMD
1.6 with 2 gig
of memory
I'm running several Seagate 200GB drives with the SATA
i also have about 200 free for anyone that would like to have one :)
On 9/21/05, Denis [EMAIL PROTECTED] wrote:
heck I got 99 invites just collecting dust... :)
--
gentoo-user@gentoo.org mailing list
--
gentoo-user@gentoo.org mailing list
Am Donnerstag, den 22.09.2005, 00:59 -0400 schrieb Ron Bickers:
On Wed September 21 2005 09:51 pm, Brett I. Holcomb wrote:
1. For SATA RAID what cards and drives do you recommend for a desktop
system running Gentoo. I will be doing some audio recording on a dual AMD
1.6 with 2 gig
of
Am Donnerstag, den 22.09.2005, 11:03 +0800 schrieb Qiangning Hong:
I tried to transfer a large file (~300MB) to a windows machine from my
gentoo laptop:
# mount -t cifs //winbox/movies /mnt/samba -o iocharset=utf8,umask=
What if you just try
mount -o username=xxx //winbox/movies
81 matches
Mail list logo