On Fri, Dec 30, 2022 at 1:12 PM Urs Schütz wrote:
>
> Any chance you need to shield the scanner from light sources outside the
scan head?
> Throw a dark jacket over it for testing.
Or if it's that the light is for some reason too bright and the inside of
the lid is reflecting
it then try a piece
Any chance you need to shield the scanner from light sources outside the scan
head?
Throw a dark jacket over it for testing.
On Friday, 30 December 2022 13:42:04 GMT Dale wrote:
> Michael wrote:
> > On Friday, 30 December 2022 02:28:32 GMT Dale wrote:
> >> Howdy all,
> >>
> >> I have a HP scanjet 4570c flatbed scanner. I bought it used years ago
> >> and most of the time, it works just fine. On occasion tho, I get
> >
On 30/12/2022 13:42, Dale wrote:
Given I only use Linux, know of any good and commonly available flatbed
scanner models? I'm fine with used ones as long as they work. I like
the one I got since when I'm done, it stands upright in my closet and
takes up very little floor space. It does a really
On Fri, Dec 30, 2022 at 6:42 AM Dale wrote:
> Well, bummer. I was afraid it was going bad.
;-)
If it's still moving then it isn't necessarily bad.
Possibly you need a new goal for your old equipment?
https://www.youtube.com/watch?v=9Hfj_SuVm_0
Good luck,
Mark
Michael wrote:
> On Friday, 30 December 2022 02:28:32 GMT Dale wrote:
>> Howdy all,
>>
>> I have a HP scanjet 4570c flatbed scanner. I bought it used years ago
>> and most of the time, it works just fine. On occasion tho, I get
>> something weird. When I scan something, it adds some pinkish colo
On Friday, 30 December 2022 02:28:32 GMT Dale wrote:
> Howdy all,
>
> I have a HP scanjet 4570c flatbed scanner. I bought it used years ago
> and most of the time, it works just fine. On occasion tho, I get
> something weird. When I scan something, it adds some pinkish colored
> streaks. I too
Howdy all,
I have a HP scanjet 4570c flatbed scanner. I bought it used years ago
and most of the time, it works just fine. On occasion tho, I get
something weird. When I scan something, it adds some pinkish colored
streaks. I took a scrap sheet of paper and scanned the back of it. I
used a mag
I'm trying to find out why a very old and basic CanonScan N650U flatbed usb
scanner stopped working after a recent an update to sane-backends-1.1.1-r2:
Installed versions: 1.1.1-r2(09:12:17 24/02/22)(ipv6 usb zeroconf -
gphoto2 -snmp -systemd -threads -v4l -xinetd ABI_MIPS="-n32 -n64 -o32"
On Thursday, 19 July 2018 10:29:19 BST Philip Webb wrote:
> (1) I've tested 'iscan' & the result is the same failure as 'xsane'.
>
> (2) I've checked the contents of /etc/sane.d as they are now,
> as they were at my last back-up before 180626 (when scanning worked)
> & as they are in the Mint pa
(1) I've tested 'iscan' & the result is the same failure as 'xsane'.
(2) I've checked the contents of /etc/sane.d as they are now,
as they were at my last back-up before 180626 (when scanning worked)
& as they are in the Mint partition, where scanning still works :
there's no significant differe
Philip Webb wrote:
> Thanks for the replies so far, which I've followed up with ideas of my own.
>
...
>
> Further thoughts from anyone are very welcome.
>
Sometimes removing or renaming the .xsane directory (or whatever it's named,
I'm not in
front of my desktop now) from my home directory so
> On 2018-07-18, at 04:16, Philip Webb wrote:
>
> (3) I can scan without problems using Mint Xfce (on another partition),
> so it's not a hardware problem.
>
> (4) 'lsusb' lists "Bus 001 Device 004: ID 0418: 013b Seiko Epson Corp".
>
> (5) the 'epkowa' driver is the latest version : a downlo
Thanks for the replies so far, which I've followed up with ideas of my own.
(1) In /etc/sane.d/dll.conf (at the end) it lists
# Add support for the Epson-specific backend. Needs media-gfx/iscan installed
epkowa
I've installed 'iscan', but it makes no difference.
(2) The 2 pkgs which m
On Tuesday, 17 July 2018 15:23:06 BST Jack wrote:
> On 2018.07.17 02:38, Philip Webb wrote:
> > My scanner -- Epson Perfection V550 Photo -- is suddenly not detected
> >
> > when I enter 'xsane' (via the menu or Alt-F2), it says "no devices
> > available".
> >
> > I last used it without any probl
On 2018.07.17 02:38, Philip Webb wrote:
My scanner -- Epson Perfection V550 Photo -- is suddenly not detected
:
when I enter 'xsane' (via the menu or Alt-F2), it says "no devices
available".
I last used it without any problem 180626.
Since then, I've updated my kernel & some other pkgs.
I've
> Since then, I've updated my kernel & some other pkgs.
You build your own kernel or rely on modules to handle it all?
Any idea what modules you've rebuilt since the last use of the
scanner?
As a sanity check you might want to take a look at VueScan. Hamerick
does a nice to of just making thin
My scanner -- Epson Perfection V550 Photo -- is suddenly not detected :
when I enter 'xsane' (via the menu or Alt-F2), it says "no devices available".
I last used it without any problem 180626.
Since then, I've updated my kernel & some other pkgs.
I've checked the USB physical connection ; the sca
Hi again !
Please, if you answer me at the previous message
use the following adress:
roger.c...@free.fr
On 27 November 2011, at 03:30, Joseph wrote:
> Any suggestion for scanner with good Linux support and ADF
I guess you mean Auto Document Feeder?
It might be worth clarifying this, as I didn't notice / understand this when I
originally saw your post yesterday.
Stroller.
Any suggestion for scanner with good Linux support and ADF
--
Joseph
On Mon, 9 May 2011 09:15:33 +0100, Neil Bothwick wrote
> On Mon, 9 May 2011 08:41:04 +0200, pat wrote:
>
> > Nothing :-( Same output as for user: "No scanners were identified. If
> > you were expecting something different, check that the scanner is
> > plugged in, turned on and detected by the san
On Monday 09 May 2011 08:41:04 pat wrote:
> On Sun, 8 May 2011 23:28:39 +0100, Neil Bothwick wrote
>
> > On Mon, 9 May 2011 00:17:42 +0200, pat wrote:
> > > I've bought USB scanner CanoScan LiDE210 which is listed with status
> > > "complete" on sane-project. The driver backend name is "genesys".
On Mon, 9 May 2011 08:41:04 +0200, pat wrote:
> Nothing :-( Same output as for user: "No scanners were identified. If
> you were expecting something different, check that the scanner is
> plugged in, turned on and detected by the sane-find-scanner tool (if
> appropriate). Please read the documenta
On Sun, 8 May 2011 23:28:39 +0100, Neil Bothwick wrote
> On Mon, 9 May 2011 00:17:42 +0200, pat wrote:
>
> > I've bought USB scanner CanoScan LiDE210 which is listed with status
> > "complete" on sane-project. The driver backend name is "genesys".
> >
> > I've followed the instructions on [1]. Th
On Mon, 9 May 2011 00:17:42 +0200, pat wrote:
> I've bought USB scanner CanoScan LiDE210 which is listed with status
> "complete" on sane-project. The driver backend name is "genesys".
>
> I've followed the instructions on [1]. The "sane-find-device -q" finds
> my scanner as:
> found USB scanner
Hello,
I've bought USB scanner CanoScan LiDE210 which is listed with status
"complete" on sane-project. The driver backend name is "genesys".
I've followed the instructions on [1]. The "sane-find-device -q" finds my
scanner as:
found USB scanner (vendor=0x04a9 [Canon], product=0x190a [CanoScan],
Here is a method for sharing a scanner over a network with
sane-backends and inetd:
http://www.linux.com/articles/57798
My prospective printer/scanner (HP c4599) is not listed in the SANE
compatible devices:
http://www.sane-project.org/sane-mfgs.html#Z-HEWLETT-PACKARD
It is listed in HPLIP, but
On Saturday 08 July 2006 20:05, Neil Bothwick wrote:
> > But where do I put this?
Hi,
Neil advised that in /etc/udev/rules.d/10-udev.rules I enter the following:-
SYSFS{product}=="USB MFP", SYSFS{manufacturer}=="EPSON", GROUP:="scanner",
MODE:="0660"
This worked well and I was able to scan.
Howe
On Sat, 8 Jul 2006 17:29:15 +0100, Paul Stear wrote:
> Thanks that's just what I'm looking for.
> SYSFS{product}=="0x0808", SYSFS{manufacturer}=="0x04b8",
> GROUP:="scanner", MODE:="0660"
>
> But where do I put this?
/etc/udev/rules.d/10-udev.rules
--
Neil Bothwick
Oxymoron: Reagan memoirs.
On Saturday 08 July 2006 16:45, Neil Bothwick wrote:
> SYSFS{product}=="CanoScan", SYSFS{manufacturer}=="Canon", GROUP:="scanner",
> MODE:="0660"
Neil,
Thanks that's just what I'm looking for.
SYSFS{product}=="0x0808", SYSFS{manufacturer}=="0x04b8", GROUP:="scanner",
MODE:="0660"
But where do I p
On Sat, 8 Jul 2006 14:16:03 +0100, Paul Stear wrote:
> My conclusion is that I have a permmissions problem, but I can't find
> out where or how to change them.
> Can anybody help please?
> I have device epson:libusb:003:005
> vendor=0x04b8 product=0x0808
This happened to me recently too. The perm
On Saturday 08 July 2006 14:45, Gian Domeni Calgeer wrote:
> Hi
>
> Normally, you have to be in the scanner group. You should try gpasswd -a
> scanner and then logout and login.
>
> Gian
>
> Am Samstag, 8. Juli 2006 13:16 schrieb Paul Stear:
> > Hi all,
> > I have just tried to use my scanner for
Hi
Normally, you have to be in the scanner group. You should try gpasswd -a
scanner and then logout and login.
Gian
Am Samstag, 8. Juli 2006 13:16 schrieb Paul Stear:
> Hi all,
> I have just tried to use my scanner for the first time in months and it is
> not recognized. However, if I run xsc
Hi all,
I have just tried to use my scanner for the first time in months and it is not
recognized. However, if I run xscanimage as root it all works well.
I have read the man pages and my setup seems to be correct scanimage -L find
the scanner as root but not as a user.
My conclusion is that I
I found a solution and I have posted it at
http://gentoo-wiki.com/Talk:HOWTO_Install_a_USB_scanner#.22The_above_udev_rules_are_wrong..22.
If anybody who knows their hotplug and udev stuff better than I do could
take it upon themselves to correct the usb scanner howto itself
(http://gentoo-wiki.com
I have just acquired an Epson 1660 Photo scanner and I am having real
trouble setting the permissions.
Unfortunately I haven't been able to find a howto that explains clearly
how you are supposed to get permissions sorted out using hotplug with
more recent 2.6 kernels. There's something about a sc
On 12/18/05, Richard Fish <[EMAIL PROTECTED]> wrote:> On 12/17/05, smoke3 <[EMAIL PROTECTED]> wrote:> > Hello all,
> > I've got a CX5400 EPSON All-in-One printer/scanner.> >> > I tried to configure sane-backends in order to get it working on my> > 2.6.14-gentoo (amd 64), but I think I'm doing somet
On 12/17/05, smoke3 <[EMAIL PROTECTED]> wrote:
> Hello all,
> I've got a CX5400 EPSON All-in-One printer/scanner.
>
> I tried to configure sane-backends in order to get it working on my
> 2.6.14-gentoo (amd 64), but I think I'm doing something wrong.
> That is, when I type:
> # sane-find-scanner -q
Hello all,I've got a CX5400 EPSON All-in-One printer/scanner.I tried to configure sane-backends in order to get it working on my 2.6.14-gentoo (amd 64), but I think I'm doing something wrong. That is, when I type:
# sane-find-scanner -q I get:found USB scanner (vendor=0x04b8 [EPSON], product=0x0808
On Sat, 2005-10-01 at 22:45 -0400, C. Beamer wrote:
> Hi,
>
> When I first installed Gentoo on my main machine about a month ago, my
> scanner was working just fine. I don't use it that much, but today when
> I went to use it (using xsane), I got a message that no devices were found.
>
> I check
Hi,
When I first installed Gentoo on my main machine about a month ago, my
scanner was working just fine. I don't use it that much, but today when
I went to use it (using xsane), I got a message that no devices were found.
I checked dmesg and as far as I can tell, there doesn't seem to be
anythi
Gabriel Fernández wrote:
> I want to install a Gentoo Linux on equipment has connected to scanner Kodak
> i50 (multipage). I don't find answer in google, so I resort to the list.
> Somebody must some scanner scsi of this type working with Gentoo Linux?
> Thanks a lot,
>
AFAIK you need support fro
I want to install a Gentoo Linux on equipment has connected to scanner Kodak
i50 (multipage). I don't find answer in google, so I resort to the list.
Somebody must some scanner scsi of this type working with Gentoo Linux?
Thanks a lot,
--
/*-*/
"Sin
44 matches
Mail list logo
