:
Premier Laboratory, LLC
1567 Skyway Drive, Unit E
Longmont, CO 80504
-Original Message-
From: Caroline Miller via Histonet [mailto:histonet@lists.utsouthwestern.edu]
Sent: Tuesday, April 11, 2017 11:59 AM
To: Paula Keene Pierce
Cc: Histonet Histonet
Subject: Re: [Histonet] No Ribbon
Yes
ierlab.com
>
> Ship to Address:
>
> Premier Laboratory, LLC
> 1567 Skyway Drive, Unit E
> Longmont, CO 80504
>
>
> -Original Message-
> From: Caroline Miller via Histonet [mailto:histonet@lists.
> utsouthwestern.edu]
> Sent: Tuesday, April 11, 2017 11:59 AM
&
tonet@lists.utsouthwestern.edu" <histonet@lists.
> utsouthwestern.edu>
> Sent: Tuesday, April 11, 2017 11:55 AM
> Subject: [Histonet] No Ribbon
>
> I feel like I should be able to figure this one out, but I have been having
> trouble with getting a ribbon for a while now. I
-759-7513www.excaliburpathology.com
From: Gareth Davis via Histonet <histonet@lists.utsouthwestern.edu>
To: "Histonet@lists.utsouthwestern.edu" <histonet@lists.utsouthwestern.edu>
Sent: Tuesday, April 11, 2017 11:55 AM
Subject: [Histonet] No Ribbon
I feel
Yes, I use ice for my blocks and get them as cold as possible. It is a
high profile blade holder. The paraffin is good for embedding and
processing. I was told to use a low angle for Statcut blades, but I will
try it at 10.
Thanks
--
Ms. Gareth B. Davis, B.S., HT, QIHC (ASCP)cm
Yuma
I feel like I should be able to figure this one out, but I have been having
trouble with getting a ribbon for a while now. I have a Leica Microtome
RM2125 and I use either a AccuEdge blade (I get one block to cut then it
starts to compress) or a StatCut blade (sections do not stick together at
For those of you who have the Thermo Fisher Printmate Cassette Labeler:
I just had service in and they changed the ribbon while they were here,
and the barcodes started printing really light. The tech called in to
Fisher and was told that there is a bad lot of ribbons. The lot # is
6325.