Mark Yuhas wrote:
Using the JCL provide by Mr. Engelbrecht, I discovered that the extract worked
as coded.
I'm glad for your part.
Thank you for this JCL which I will use again and again.
You are most welcome!
But I cannot take credits alone. Actually all credits and thanks must go to
I have a callable (non-PC; just basic CALL) that requires APF authorization
by the caller. It partially operates in Key 0 Supervisor State, but I want
to allow callers the flexibility to enter in any key and either state.
I know how to get to and from Supervisor State with MODESET (SVC form).
On Tue, 19 Aug 2014 11:39:11 +0200 Charles Mills charl...@mcn.org wrote:
:I have a callable (non-PC; just basic CALL) that requires APF authorization
:by the caller. It partially operates in Key 0 Supervisor State, but I want
:to allow callers the flexibility to enter in any key and either
Perfect! I knew it had to be there somewhere. Thanks.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Binyamin Dissen
Sent: Tuesday, August 19, 2014 11:45 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Best way to tell in code
Does SPKA use normal addressing logic such that SPKA 0(0) means set a PSW
key of 0 and not set a PSW key equal to bits 56-59 of register 0? I would
assume so but the P Op does not say that in so many words, and I wanted to
make sure.
Thanks,
Charles
On Tue, 19 Aug 2014 12:35:58 +0200 Charles Mills charl...@mcn.org wrote:
:Does SPKA use normal addressing logic such that SPKA 0(0) means set a PSW
:key of 0 and not set a PSW key equal to bits 56-59 of register 0? I would
:assume so but the P Op does not say that in so many words, and I wanted
Thanks. In other words, the former: set a PSW key of 0.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Binyamin Dissen
Sent: Tuesday, August 19, 2014 12:52 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SPKA operation question
snip
You don't need to IPL to add or remove datasets from linklist.
You can create a new PROGxx member that uses another linklist name (other
than your default 00), and then issue the T PROG=xx that points to that
new linklist, then you can issue the SETPROG command to make the new
linklist
My comments below.
Regards,
Tom Conley
On 8/19/2014 9:05 AM, Mainframe Newbie wrote:
Hi,
Can someone help me confirm if the below technologies are supported and can be
executed on RDT?
1. JCL
YES
2. Assembler
YES
3. VSAM
YES
4. IMS DC
YES
5. CLIST
YES
6. Linux on System Z
Hi,
I am trying to update a dataset but I receive the below error :
IEC212I 414-04,IFG0201R,JAKE099,PROC099,ISP09114,0F81,TCHN01,
TCHN01.ASM.DATA
***
IBM manual says :
Explanation
04
An I/O error occurred writing a DSCB during processing of a CLOSE macro
instruction.
I am trying to update
On Tue, 19 Aug 2014 08:28:22 -0400, Peter Relson wrote:
The only thing that is truly safe is to let new address spaces and jobs
use the new lnklst while old ones continue to use the old one.
This has always been my approach - protect the long running address spaces.
Of course, on a sysprog
What IOS000I message did you receive?
Regards,
John K
Jake A of the IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU
wrote on 08/19/2014 08:22:35 AM:
From: Jake anderson justmainfra...@gmail.com
To: IBM-MAIN@LISTSERV.UA.EDU
Date: 08/19/2014 08:22 AM
Subject: Dataset update error from
Hi John,
IOS000I 0F81,2D,WRI,E7,0200,,06820003,TCHN01,JAKE099 , 855
80026F14081218D156000F004CE0
On Tue, Aug 19, 2014 at 7:15 PM, John P Kalinich jkali...@csc.com wrote:
What IOS000I message did you receive?
Regards,
John K
Jake A of the IBM
WRI is write inhibited or read-only. Check your VM sharing options.
Regards,
John K
IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU wrote on
08/19/2014 08:57:41 AM:
From: Jake anderson justmainfra...@gmail.com
To: IBM-MAIN@LISTSERV.UA.EDU
Date: 08/19/2014 08:57 AM
Subject: Re:
Hi,
MVS guest directory has the volume in READ/WRITE and also the security
access to the Volume has been enabled to access as WRITE. After the Change
the MVS guest and it was also IPLed to pick up the changes.(But still no
luck)
On Tue, Aug 19, 2014 at 7:32 PM, John P Kalinich jkali...@csc.com
What does Q V addr show?
On Tue, 19 Aug 2014 19:38:57 +0530 Jake anderson justmainfra...@gmail.com
wrote:
:Hi,
:
:MVS guest directory has the volume in READ/WRITE and also the security
:access to the Volume has been enabled to access as WRITE. After the Change
:the MVS guest and it was also
Hi . We are seeing U4093-92 in the loadlib of a module, but the programs are
running in production with out issues. Kindly let me know is there any issue we
need to worry about ?
Thanks
Ron T
--
For IBM-MAIN subscribe /
q da TCHN01
DASD 966F CP SYSTEM TCHN01 57SHARED
966F is the real address
On Tue, Aug 19, 2014 at 7:49 PM, Binyamin Dissen bdis...@dissensoftware.com
wrote:
What does Q V addr show?
On Tue, 19 Aug 2014 19:38:57 +0530 Jake anderson justmainfra...@gmail.com
wrote:
:Hi,
:
:MVS
Could there be a restriction from VM perspective for a certain Volume to be
not shared as WRITE ?
On Tue, Aug 19, 2014 at 7:55 PM, Jake anderson justmainfra...@gmail.com
wrote:
q da TCHN01
DASD 966F CP SYSTEM TCHN01 57SHARED
966F is the real address
On Tue, Aug 19, 2014 at 7:49
So some more details would be helpful
1) what version of z/OS?
2) What got the abend
Batch Job
USS process
CIC transaction
IMS Transaction
DB2 stored procedure
Etc
Please post the CEE Dump output.
The question you ask is not sufficient for use to
Am I missing something? What is an ABEND in a loadlib? Loadlibs don't ABEND;
running programs (tasks, actually) do. If a program is running okay, it does
not ABEND. If a program ABENDs, it is not running okay. What am I missing in
what you write below?
Charles
-Original Message-
From:
Z/OS 01.13.00. This is a CICS program. Thanks!
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
It would help to provide all the details requested.
CICS - You need to use the CICS dump utilities to determine the issue. I think
CICS has a decent section for dump reading in the CICS manuals.
Since you did not say which version of CICS, I do not know what manuals to
point you too.
Lizette
The Program is running in production, when we browse the loadlib it is showing
ABEND U4093-92 . We are now planning to make the changes and move to
production, was wondering why this is showing like this ?
Thanks
Rajeev V
--
Ron Thomas wrote:
The Program is running in production, when we browse the loadlib it is
showing ABEND U4093-92 . We are now planning to make the changes and move to
production, was wondering why this is showing like this ?
Still too few info. Please review Mike, Charles and Lizette's
Ron Thomas wrote:
The Program is running in production, when we browse the loadlib it is
showing ABEND U4093-92 . We are now planning to make the changes and move to
production, was wondering why this is showing like this ?
When we browse the loadlib... Are you getting an ISPF abend?
Hi list,
I've been meandering through the archives and saw several threads regarding
documentation changes that IBM has been implementing, with knowledge centers et
al. So my question is a rather basic one. We just upgraded to 1.13 a couple
months ago. Do the documentation DVDs no longer
You need to see the virtual address information - that is how it is connected
to your virtual machine.
Use the address that MVS knows about - 0F81
On Tue, 19 Aug 2014 19:55:39 +0530 Jake anderson justmainfra...@gmail.com
wrote:
:q da TCHN01
:DASD 966F CP SYSTEM TCHN01 57SHARED
: 966F is
Ron,
You may have issues with doing diagnostics.
This Manual is a good place to start.
z/OS Diagnostic Data Collection and Analysis
http://www.redbooks.ibm.com/redbooks/pdfs/sg247110.pdf
It covers just about all types of abend analysis.
Lizette
-Original Message-
From: IBM
Correct, DVDs are no longer being produced. I forget what version of z/OS they
did that. z/OS V1.13 may be the last - but I am not sure.
I would recommend getting MOZILLA browser and install the addin - DOWNTHEMALL.
It is very fast to down load anything from the web. I use it to download all
Probably this link might help?
www.ibm.com/systems/z/os/zos/library/
Kolusu
IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU wrote on
08/19/2014 08:24:52 AM:
From: Pommier, Rex rpomm...@sfgmembers.com
To: IBM-MAIN@LISTSERV.UA.EDU
Date: 08/19/2014 08:25 AM
Subject: revisiting the
Pommier, Rex wrote:
I've been meandering through the archives and saw several threads regarding
documentation changes that IBM has been implementing, with knowledge centers
et al.
There are lots of threads about 'LookAt' which has been sunsetted too. Search
the archives for 'LookAt'. You
Hi Lizette,
Thanks for the info. I already use Mozilla, will check out the addin. So
along with the DVDs, the softcopy downloads of the DVD images (or collections)
are no longer available? Bummer...
Rex
-Original Message-
From: IBM Mainframe Discussion List
IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU wrote on
08/19/2014 11:24:52 AM:
From: Pommier, Rex rpomm...@sfgmembers.com
To: IBM-MAIN@LISTSERV.UA.EDU
Date: 08/19/2014 11:25 AM
Subject: revisiting the documentation dilemma
Sent by: IBM Mainframe Discussion List
Hi Kolusu,
Yep, spent much time there yesterday and all I could find were individual
manuals. I was hoping to be able to download the entire library like I used to
be able to do but it appears as though that functionality has gone the way of
the dodo bird.
Thanks,
Rex
-Original
On Tue, 19 Aug 2014 19:55:39 +0530, Jake anderson justmainfra...@gmail.com
wrote:
q da TCHN01
DASD 966F CP SYSTEM TCHN01 57SHARED
966F is the real address
On Tue, Aug 19, 2014 at 7:49 PM, Binyamin Dissen bdis...@dissensoftware.com
wrote:
What does Q V addr show?
:
: IOS000I
On 19 August 2014 05:45, Binyamin Dissen bdis...@dissensoftware.com wrote:
:But what would be the best way to determine whether the caller had entered
:in Supervisor State so I could return to the caller in his original mode
:(and also avoid the overhead of MODESET)? Some sort of store PSW
Are you saying that, when you browse the load module in its library, you see
within it the text 'U4093-92'?
If so, maybe that is just a part of a message that gets displayed in the event
of an actual problem.
===
Date: Tue, 19 Aug 2014 09:24:23 -0500
From: ron5...@gmail.com
Subject:
On Tue, Aug 19, 2014 at 10:30 AM, Lizette Koehler stars...@mindspring.com
wrote:
Correct, DVDs are no longer being produced. I forget what version of z/OS
they did that. z/OS V1.13 may be the last - but I am not sure.
I would recommend getting MOZILLA browser and install the addin -
On 19 August 2014 11:43, Pommier, Rex rpomm...@sfgmembers.com wrote:
Yep, spent much time there yesterday and all I could find were individual
manuals. I was hoping to be able to download the entire library like I used
to be able to do but it appears as though that functionality has gone the
I was wondering if that was what the OP meant ...
If so, you can totally ignore it. A program load module contain the words
DISASTROUS ERROR HAS OCCURRED but the existence of that text does not
indicate the existence of a problem. Neither does the text U4093-92.
Charles
-Original
Woo-hoo!!!
Thank you, Bob. I don't know how I missed that one - except that I was looking
for the previous edition of it and couldn't find the bulk download for that
one. This is exactly what I was looking for.
Much appreciated, downloading now.
Elardus,
I went to the link Bob provided
Pommier, Rex wrote:
I went to the link Bob provided and about 3 clicks later got to a screen where
I could download K3T4271V. I believe this is what I'm looking for, have
gotten it downloaded but got pulled into a couple other situations so haven't
been able to play with it yet.
Thanks Rex
On Tue, 19 Aug 2014 09:50:57 -0500, Ron Thomas ron5...@gmail.com wrote:
Z/OS 01.13.00. This is a CICS program. Thanks!
You may want to read this entry in the Archives. It might be your problem also.
https://listserv.ua.edu/cgi-bin/wa?A2=ind1005L=ibm-mainT=0O=DF=S=P=399979
--
Dale R. Smith
I'm running some tests with ASCRE and am getting some difference in the result
I cannot explain. Here is the relevant part of the code:
WTO 'ASCRETST starting system AS as IEESYSAS.TSTCWCIS', *
ROUTCDE=(2,11),DESC=7
MODESET KEY=NZERO,MODE=SUP
ASCRE
Ron Thomas wrote:
Hi . We are seeing U4093-92 in the loadlib of a module, but the programs are
running in production with out issues. Kindly let me know is there any issue we
need to worry about ?
Assuming you meant that you are inspecting the load module with ISPF Browse or
similar, I
ok. that is correct. Based on discussion so far i believe we can ignore the
text in the load module. Thanks!
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the
I will bite? I am curious. What problem are you trying to solve that lead you
to browse a loadmodule and suspect that because it had the potential to issue
this message, it was suspect?
There are lots of scary text messages in lot of loadmodules. It is only when
they are issued by the running
I haven't read the rest of the thread yet. Let the flames possibly roar, but
Softcopy Librarian still worked for me to download z/OS 2.1. Unforutantely, is
only .pdf's. But it did bring me shelves and the Softcopy Reader: Shelf
Organizer allows me to find what I want when I need it.
Hi Dave,
No flame war, just good, positive feedback. Another poster mentioned the
ability to download manuals thru Softcopy Librarian (I haven't actually looked
at it because I've been happy in my little world of Bookie and my 1.11 library
installed on my PC) and Bob Rutledge kindly pointed
Not a flame, but I've finally gotten used to the InfoCenter delivery. But soon
I'll be forced to accustom to the Knowledge Center delivery. The
presentation is somewhat like the InfoCenter, but finding stuff initially is a
bit more challenging. For example, to find the doc for the COBOL
I have been looking at the LE documentation now for days and still not sure
what I need to do to have my Assembler program call C or C++ programs. I need
this interface to be very efficient because I will be calling these subroutines
maybe more than a 1,000,000 times a day. What I have come up
I concur re: DownThemAll! I have been using for several z/OS versions to
get the manuals and it works great. You just go to the main PDF page and
then set a filter that says that you only want pdf files and let it rip.
FWIW - If anyone is using Linux or Unix, following a script that will
On Tue, Aug 19, 2014 at 3:28 PM, Donald Likens dlik...@infosecinc.com
wrote:
I have been looking at the LE documentation now for days and still not
sure what I need to do to have my Assembler program call C or C++ programs.
I need this interface to be very efficient because I will be calling
On 8/19/2014 at 04:36 PM, Kirk Wolf k...@dovetail.com wrote:
FWIW - If anyone is using Linux or Unix, following a script that will
generate symbolic links with the PDF title for all of the pdf files in
directory. Its very handy so that you can have meaningful names for all
of the PDFs.
I have been struggling with this for a while... Cancel always works but I don't
think that is clean. I just looked in the IP Socket Interface guide hoping it
would help but the design noted there has a task receiving data forever. I do
not have a problem if the socket is busy. I can always set
Since forever, a stepname of IEFPROC (and a ddname of IEFRDER)
have had special meaning within started procedures. Among other
things, they allow JCL parameters included on the START command
to build a //IEFPROC.IEFRDER DD override statement.
Also, the IEFPROC stepname affects the jobname
You might, if you have not done so, join the TCPIP List for a more focused
forum.
To join
http://www2.marist.edu/htbin/wlvindex?IBMTCP-L
go to the bottom of the webpage to join.
Lizette
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
We have been using a Socket-C lose and then a Socket-Shutdown..
Regards,
Scott
www,idmworks.com
From: dlik...@infosecinc.com
Sent: Tuesday, August 19, 2014 5:02 PM
To: IBM Mainframe Discussion List
I have been struggling with this for a while... Cancel always works
I'm running some tests with ASCRE and am getting some difference in
the result I cannot explain. Here is the relevant part of the code:
WTO 'ASCRETST starting system AS as IEESYSAS.TSTCWCIS', *
ROUTCDE=(2,11),DESC=7
MODESET KEY=NZERO,MODE=SUP
ASCRE
Checkout selectx() in the IP sockets manual. It has extra parameter for
an ECB list. The idea is to start two threads, one that listens for a
shutdown command via EXTRACT/CIB etc and the other is the socket server.
When you receive a shutdown event post the ECB that selectx() is waiting
on and
That looks good to me. Make sure that you setup the parameter lists
correctly. C/C++ are call by value languages. The code path for calling
a routine is just a few instructions. It loads LE control blocks into
registers and then uses BSM to invoke the routine.
You certainly will need LE if
62 matches
Mail list logo