67No device pools exist to fulfill request for media type.
On Thu, Sep 25, 2014 at 6:10 PM, Mainframe Sysprog <
mainframe.sysp...@gmail.com> wrote:
> I think the previous post didn't work due to incorrect email. Trying it
> again on another email. Sorry if it gets posted twice!
>
> -- For
Could there be a restriction from VM perspective for a certain Volume to be
not shared as WRITE ?
On Tue, Aug 19, 2014 at 7:55 PM, Jake anderson
wrote:
> q da TCHN01
> DASD 966F CP SYSTEM TCHN01 57SHARED
> 966F is the real address
>
>
>
> On Tue, Aug 19, 2014
q da TCHN01
DASD 966F CP SYSTEM TCHN01 57SHARED
966F is the real address
On Tue, Aug 19, 2014 at 7:49 PM, Binyamin Dissen wrote:
> What does Q V addr show?
>
> On Tue, 19 Aug 2014 19:38:57 +0530 Jake anderson >
> wrote:
>
> :>Hi,
> :>
> :>MVS gu
WRI is write inhibited or read-only. Check your VM sharing options.
>
> Regards,
> John K
>
> IBM Mainframe Discussion List wrote on
> 08/19/2014 08:57:41 AM:
>
> > From: Jake anderson
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Date: 08/19/2014 08:57 AM
> >
the IBM Mainframe Discussion List
> wrote on 08/19/2014 08:22:35 AM:
>
> > From: Jake anderson
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Date: 08/19/2014 08:22 AM
> > Subject: Dataset update error from MVS guest
> > Sent by: IBM Mainframe Discussion List
> >
>
Hi,
I am trying to update a dataset but I receive the below error :
IEC212I 414-04,IFG0201R,JAKE099,PROC099,ISP09114,0F81,TCHN01,
TCHN01.ASM.DATA
***
IBM manual says :
Explanation
04
An I/O error occurred writing a DSCB during processing of a CLOSE macro
instruction.
I am trying to update this
Lizette,
It was not about issue. Here I am trying to get opinion on secondary
extents. Interested people do respond but yes I have manuals going
through.
On 10 Aug 2014 19:53, "Bob Shannon" wrote:
> > But is your third sentence garbled?
>
> Yes it is. Thanks for pointing that out. It should read
Bob
Yes they are part of linklist. Before and after IPL there extents were 2
and 4.
On 10 Aug 2014 16:25, "Bob Shannon" wrote:
> > Load libraries go to more than one extent all the time. I don't believe
> there is any "general" problem.
>
> The problem occurs if the libraries are in the Linklist
extent, but that's
> very low on my list of worries.
>
> Charles
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Jake anderson
> Sent: Sunday, August 10, 2014 8:26 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject:
Hi Paul
The product is not running as started task but it refers the module when it
is invoked from ispf panel or any batch job.
Jake
On 10 Aug 2014 12:14, "Paul Gilmartin" <
000433f07816-dmarc-requ...@listserv.ua.edu> wrote:
> On Sun, 10 Aug 2014 11:55:38 +0530,
Hi All,
I see some of a product load modules have extents more than 1 like 2 and 4.
I still the product runs with no error and abend. Are there any impact to
the product if the libraries are more than 1 ?
Could you please suggest me if it is good to run the product with extents
more than 1.
Jake
Hi All,
During the Z/OS maintenance apply cycle I got a message IXMSCRPA was not
found and I just created a empyt File IXMSCRPA the APPLY job completed with
RC-0.
/usr/lpp/ixm/IBM/IXMSCRPA
SMP/E 36.22
SEQ NUM 05
/usr/lpp/ixm/IBM/IXMSCRPA: not found
>From SMPOUT
CA
mes will be, plus a suffix to ensure they have unique names. The prefix
> can be up to 5 characters. Any volume name which does not start with that
> prefix will be rejected by JES2.
>
> Matthew
>
> On Thu, 22 May 2014 17:04:11 +0530, Jake anderson <
> justmainfra...@gmail.
be
> SPOOL1, SPOOL2, etc (or any other following letter/number).
>
> Lucas
>
>
> 2014-05-22 8:34 GMT-03:00 Jake anderson :
>
> > Hello All,
> >
> >
> > I am trying to add spool volume with a command : $SSPOOL(TSO11V), but it
> > gives out me the
Hello All,
I am trying to add spool volume with a command : $SSPOOL(TSO11V), but it
gives out me the below error :
$HASP003 RC=(04),S SPOOL(TSO11V) - CONTAINS AN INVALID
$HASP003 SUBSCRIPT
As an initial message from IBM manual :
04*CONTAINS AN INVALID SUBSCRIPT[, RANGE IS (-yyy
Hi All,
One of our sandbox *Master* Address space is consuming a E-SQA of 94% with
13.5MB. Under what circumstances we see spike in E-SQA to be more.
Is there any pointers which can help me to understand its utilization.
Normally I would expect the E-SQA to be close to 6MB but this time it looks
Use ISMF.
On Mon, May 5, 2014 at 8:02 PM, Rajesh Janakiraman
wrote:
> Hi Mates,
>
> Please help me to generate a Dataset Report for a particular storage group.
>
> Storage Group is PUSRSG and it contains all TSO users.
>
> Kindly do the needful.
>
> --
DSCLI and TPCR. And a simple single
> click in TPCR may end up being multiple DSCLI commands. But DSCLI is
> probably where I'd start looking.
>
> Scott Chapman
>
>
>
>
>
>
> On Sat, 2 Nov 2013 23:11:45 +0530, Jake anderson
> wrote:
>
> >Hell
I agree with lizette. I/O reports should tell you.
On 20 Apr 2014 10:18, "Lizette Koehler" wrote:
> Do you have any automation tools like OPS/MVS or Tivoli or other?
>
> Perhaps you need a timer in the VARY command step to delay the time the
> next step runs.
>
> The vary may not be slow, but the
When you say the response is slow then did you check the enqueues or cpu or
any exception messages in rmf or something should be in logrec. Have you
started experiencing it recently ?
On 20 Apr 2014 09:36, "Lizette Koehler" wrote:
> How did you determine they are slow.
>
> How long do you think
Hello All,
I am looking for some possibility of issuing a MVS command On every Month
of 1st week.
Its like : /I DEL on every 2nd of Each Month.
I am trying to search under JES2 Time command but not able to get a right
syntax.
Could someone please point me to the right command or any new approac
> W dniu 2014-03-21 16:18, Jake anderson pisze:
>
> Hi,
>>
>> For an NJE to work we must have to two different nodes. Is there a way for
>> NJE to work within a single Node(Monoplex) just to communicate to another
>> product(As a socket-Running in same Node) ?
>>
Hi,
For an NJE to work we must have to two different nodes. Is there a way for
NJE to work within a single Node(Monoplex) just to communicate to another
product(As a socket-Running in same Node) ?
Is there a case study for the NJE to work on a Monoplex environment ? I
tried looking at the share s
Show us your JCL , Did you tried putting the STORCLAS,MGMTCLAS(for the
target System) where you are trying to restore...
I think your JCL should give us some hints on where you are missing
On Fri, Mar 21, 2014 at 8:06 PM, Nathan J Pfister
wrote:
> Hello;
>
> I am relatively new to SMS, and rath
See the IODF and see if the newly Added LCU's are reflecting. This is shop
specific and its hard to find whats in your Shop(Must get your IBM folks to
answer your query).
On Fri, Mar 14, 2014 at 1:58 PM, baby eklavya wrote:
> Yes . But the device is offline . I thought D U,VOLSER would not retur
Hello Group,
I am trying to use DAF to track the creation of dataset using a specific
HLQ. Unfortunately I have not set AUDIT logging using our security software.
Let me be very precise, I am trying to exploit the potentiality of DAF to
check if i can track the USERID who has a created a set of d
This looks to be interesting :
http://pic.dhe.ibm.com/infocenter/zos/v1r12/index.jsp?topic=%2Fcom.ibm.zos.r12.idai600%2Fauthcls.htm
On Wed, Mar 12, 2014 at 8:56 PM, mf db wrote:
> "The board is at the end of the month?"
>
> ??
>
>
> On Wed, Mar 12, 2014 at 8:55 PM, Micheal Butz >wrote:
>
> > O
Hello,
Cross Posted on IBM MAIN and RACF-L
Are there anyone who has set AT-TLS for zAware on Z/OS. I have been
referring a RED book on enabling at-tls but I am not able to understand the
need of importing zAware certificates to RACF. If my Understanding is
correct zAware does not have any interac
0009 008ED960 EXCLUSIVEWAIT
> SYSP CONSOLE0009 0076B470 EXCLUSIVEWAIT
> SYSP CONSOLE0009 0076B738 EXCLUSIVE WAIT
>
>
>
>
> On Mon, Feb 24, 2014 at 3:53 PM, Jake anderson >wrote:
>
>
t; MFORM=(T,S,J)AREA=(Z)PFKTAB=PFKTAB00
> > USE=FC DEL=RD RTME=1RNUM=20 SEG=20CON=N
> > LEVEL=(ALL)
> > MONITOR=(JOBNAMES) INTIDS=N UNKNIDS=N
> > ROUT=(1-10,12-128)
> > MSCOPE=(*)
> >
> >
> >
Ok this for ROUTE Command in CONSOLE.. it would vary from shop to shop and
time depends upon the configuration.(CONSOLxx).
So in your Shop, how long does it takes ?
On Mon, Feb 24, 2014 at 1:58 PM, baby eklavya wrote:
> Class C3 commands are ordinary attached commands that run in the CONSOLE
>
Using RMF, I see unalloc common area : 6796K, So looks like I have storage
close to 6MB.
On Thu, Feb 20, 2014 at 3:40 PM, Jake anderson wrote:
> Hello,
>
> I am pasting the Job log
>
> 10.53.23 JOB02673 IEW4000I FETCH FOR MODULE DFHEISUP FROM DDNAME STEPLIB
> FAILED BE
> may be able to map that with IPCS.
>
> I am not sure that MSUs are relevant. I would think configured storage on
> your LPAR (D M command) would be more helpful.
>
>
>
> Lizette
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List
Hello,
Cross posted to CICS as well
I am running a CICS load module scanner job where it fails with the below
message
10.53.23 JOB02673 IEA995I SYMPTOM DUMP OUTPUT 502
502 SYSTEM COMPLETION CODE=106 REASON CODE=000C
502 TIME=10.53.23 SEQ=00242 CPU=
Hello Group,
We have been taking a z/OS SAD to a dasd in our shop and it is also little
time consuming since the LPAR in a wait state has to wait for re-ipl until
the SAD process completes.
I have been reading through :
http://pic.dhe.ibm.com/infocenter/zos/v1r13/index.jsp?topic=%2Fcom.ibm.zos.r1
Apology for the wrong header(Not a VTOC index problem).. The volumes are
accessible from other LPAR but not sure why it is stopping me to access
these volumes from the current LPAR.
On Thu, Jan 9, 2014 at 2:20 PM, Jake anderson wrote:
> Hello,
>
> I am trying to access some of th
Hello,
I am trying to access some of the dataset sitting on a particular volume
called TKOL01,but I end up with the error:
IEC143I 213-18,IFG0196X
Manual : 18An I/O error occurred in writing back a format-1 DSCB.
Will it be safe to run a build index Job. Post the Buildix the Datasets
wo
Hello,
I am performing a unters for a Rel file using TRSMAIN. Unfortunately it is
failing due to insufficient allocation during temporary dataset creation.
Are there any parameter within TRSMAIN step that can influence or create a
larger Temporary dataset.
Right now the RELFILE is sitting on M
There must be a program directory and post installation steps... You could
just follow up..
On Wed, Dec 11, 2013 at 7:06 PM, Chokalingam Thangavelu <
thangavelu.chokalin...@wipro.com> wrote:
> Hi,
>
> We need SFTP to be installed and configured on mainframe. I have ordered
> the OPEN SSH from IB
Hello,
To be precise, If the synchronization process is interrupted. Then which
time is taken by the Z/OS ? Is it the last time synchronization ?
On Mon, Dec 9, 2013 at 5:15 PM, Jake anderson wrote:
> Hello All,
>
> How often does the NTP server syncs up with time in Z/OS ? For e
Hello All,
How often does the NTP server syncs up with time in Z/OS ? For example if
there is no synchronization between NTP and Z/OS, then which time does Z/OS
takes up ? If there is no changes in CLOCKxx parameter been made.
Any pointers or advise are much appreciated.
Jake
--
Thank you ,
> Steyn !
>
>
>
>
> On Thursday, November 21, 2013 5:32 PM, Lizette Koehler <
> stars...@mindspring.com> wrote:
>
> I would start by doing an internet search on your messages IOS444I. There
> should be some helpful hints out there.
>
> Lizette
&g
Hello Group,
For our New storage Box,While dynamically adding new CHPID to existing
control UNIT, I tried displaying new CHIPD but its only show that path are
online not operational. I have referred the below link but I am not able to
get any Clue.
http://publibz.boulder.ibm.com/cgi-bin/bookmgr
Hello All,
Is there an opportunity to automate the flash copy in DS8800 using Tivoli
storage productivity center for replication ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@li
Lizette,
Apology If my thoughts are different. Does the wait state 064 really has to
do anything with the wrong syntax ?
On Mon, Oct 21, 2013 at 6:52 PM, Lizette Koehler wrote:
> Just one comment,
>
> When I run into these types of issues, I usually add a comment to that
> member with a warning
what did you do to resolve ?
On Sat, Oct 19, 2013 at 9:34 PM, suresh chacko wrote:
> Thank you all for the support and feedbacks.
>
> Regards,
> Suresh
>
>
> On Fri, Oct 18, 2013 at 6:08 PM, Peter Relson wrote:
>
> > >I just looked in the Assembler Authorized Guide on Virtual Storage
> > >And
Hello,
My question is about a User catalog getting moved to a different volume.
The scenario is the user catalog belongs to one of our plex with Three
LPARS.(Each LPAR has its own MCAT).
The User catalog is connected to each Master catalog. So for the user
catalog move I adopted the below approa
To add for the data set missing. You must be looking in your LISTCAT and
See if there are any Aliases are defined foryour First HLQ(It could be that
your system might have Multi-Level Aliases set up)...
On Fri, Oct 11, 2013 at 12:54 AM, Jake anderson wrote:
> Looks like you need to hav
Looks like you need to have a minimal SMS configuration like to define some
basic Storage Group,Storclas, Data Class, Management Class. Then translate
and activate...
On Thu, Oct 10, 2013 at 11:36 PM, mf db wrote:
> Hello,
>
> I have created a LDS, Its the main catalog volume where I have creat
Hello,
If you just copy those Control Dataset you get everything same as the one
you wanna copy itbut to have the source ACS PDS dataset is good.
On Wed, Oct 9, 2013 at 6:10 PM, Raju Reddy wrote:
> Kees,
>
> I am sure my question was confusing...!!!
>
> To cut it really short... Let's forge
XEC PGM=CREWS
> file://SYSPRINT DD SYSOUT=A
> file://RESTORE DD DSN=BACKUP.CATALOGS(-1),DISP=OLD file://SYSIN DD *
> RESTORE
> ALIAS
> CAT(CATALOG.MVSICF1.VSYSC06)
>
>
> Lizette
>
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.
atalogs, then the user cat needs to be detached from the
> other masters before you do the resize and after the re-org; then, it has
> to be re-connected back to those same masters.
>
> Regards,
>
> Hervey
>
>
> -Original Message-
> From: IBM Mainframe D
Hello,
I am in the process of re-sizing a user catalog and I see there are almost
2000+ aliases defined to it. This is for one of our plex where we have 4
systems and I understand during restore the aliases will be too restored on
the system where I am running the JCL(for catalog resize). For othe
"And I think the latter is what the OP is working towards."
it looks to be the user is working on creating a alternate sysres pack
Then in that case he just have to play with IEASYMxx
On Mon, Oct 7, 2013 at 7:13 PM, Lizette Koehler wrote:
> I thought the VOL('**') was only valid for da
Yes, you can have SMS and NON sms togethter in a APF list. System just
needs those modules to run in supervisory state...
HTH
On Sat, Oct 5, 2013 at 2:31 AM, Viswanath Chandrasekaran <
mail2visw...@yahoo.com> wrote:
>
> My apologies...
>
> I hope there is no dependency for the ds to be on
yes - too keep dsn with the volume entry.
On Sat, Oct 5, 2013 at 1:49 AM, baby eklavya wrote:
> Do you intend share your Parmlib across the sysplex ? Is your Usercatalog
> shared ?
>
>
> Yes .It is shared across the sysplex !
>
>
> On Sat, Oct 5, 2013 at 1:32 A
Do you intend share your Parmlib across the sysplex ? Is your Usercatalog
shared ?
On Sat, Oct 5, 2013 at 1:29 AM, baby eklavya wrote:
> Hello all ,
>
> Is it possible to have multiple datasets with the same name but on
> different volumes authorized by adding them to APF list ?
>
> We are on
100% TGS utilization does not really needs cold start. You just need to
capture those HASPxxx message using some automation products. There are
some freewares which can help in reacting those messages. If this
particular LPAR is not related to production or development then you can
always purge the
Hello All,
I am really new to the mainframe on Cloud concept. Just going through some
white papers on mainframe on cloud. I was just curious to know about the
future of current Mainframe sites, Like is it expected to see Mainframe DC
getting shutdown slowly ?
Any thoughts are much appreciated. If
If the DASD are shared, Guess you can set up the SADMP.
On Tue, Sep 3, 2013 at 8:15 PM, Vernooij, CP - SPLXM
wrote:
> D M=STOR reports central storage, the problem could be caused by virtual
> storage.
>
> Kees.
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MA
ng except this...
> On Sep 3, 2013 7:42 PM, "Jake anderson" wrote:
>
> > Then you should know when was the last successful IPL and any changes
> done.
> > You dont even share your DASD with other System ?
> >
> >
> > On Tue, Sep 3, 2013 at 7:17 PM, Sh
Then you should know when was the last successful IPL and any changes done.
You dont even share your DASD with other System ?
On Tue, Sep 3, 2013 at 7:17 PM, Shmuel Metz (Seymour J.) <
shmuel+...@patriot.net> wrote:
> In
> ,
> on 09/03/2013
>at 02:38 PM, RCG said:
>
> >While I try to start
What does your SADMP says ?
On Tue, Sep 3, 2013 at 7:21 PM, RCG wrote:
> Hi John, Yeah region is coded with 0M although no luck.. :-(
> On Sep 3, 2013 7:18 PM, "John McKown"
> wrote:
>
> > From many years ago, I had a VTAM failure with that code because
> _somebody_
> > (not me!) put a REGION=
what does LOOKAT or Manual says about these errors ? Did you see the
listings ?
On Tue, Sep 3, 2013 at 6:08 PM, Chokalingam Thangavelu <
thangavelu.chokalin...@wipro.com> wrote:
> Thanks for your help and have changed to 000 but assembling step failing
> with RC 12.
>
> There are lot of error me
Then this Products are not available in your system. So you can follow
Lizette's suggestion by setting up the value to 000
On Mon, Sep 2, 2013 at 7:51 PM, Chokalingam Thangavelu <
thangavelu.chokalin...@wipro.com> wrote:
> Hi,
>
> We do not have following Datasets in our system.
>
> SYS1.SGLOSAM
Hello,
It is just updating SVC 254. Its like : JAKE.PROD.LPA is already in
LPALIST, but due to a new maintenance I have overridden the LPA DDDEF with
a copy of JAKE.PROD.LPA as : //DBLPA DD DSN=JAKE.PROD.LPA.NEW,DISP=SHR
So, DYNAMIC update of JAKE.PROD.LPA.NEW will be feasible ?
On Tue, Jul 23,
Hello All,
I am in a process of applying a fix to a product which eventually changes
the LPA library of the product. So as a backup I have overridden the DDDEF
by specifying a newly created LPA library(Copied from the existing one from
LPA queue).
Since Current LPA queue addresses SVC 254, for te
Hello,
Cross posted to IBM MAIN and MVS-OE list.
we have a requirement of getting the ported tools feature to our Z/OS 1.13
system. I referred
http://www-01.ibm.com/support/docview.wss?uid=isg1OA22944. I
understood that UA40677 is fix which introduces the ported tools
features. I tried downloadin
Hello,
Apology for a basic question(Being ignorant). While logging to an LPAR I
could see there were some new notification message but without reading I
just entered into tso session. Is there a possibility to view the missed
Notification messages ?
Jake
-
5257481006549d9&aid=1
>
> Basically you can only define devices/sub-channels/QDIO queue pairs
> devices to an FCP channel and the message says you’re trying to define 1200…
>
>
> Subject:FCP CHIP id
>
> From: Jake anderson
>
> I was in proc
Hello Group,
I was in process of modifying my current IODF and did below
changes.
1) Added few more Chip id's including type of FC, OSD
2) added few more partition.
3) All these CHIP id, where I am getting below issue belong to FCP type
now when I am trying to active this new c
ges you are getting?
>
> How did you do the renames?
>
> Did you do any UCLIN after the renames?
>
> Lizette
>
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Jake anderson
> Sent: Monda
Hello Group,
I am trying to take a back up of a products like SMPED.MRSTAR.** and
restoring to
other LPAR like SMPEP.MRSTAR.**.
So to make the cloned SMPE environment to work what are the other things
which needs renaming ? so that SMPEP.MRSTAR.** Goes well. I understand the
DDDEF needs the rena
Hello,
Thanks for help. I still have one doubt that what is the use, if I
change
SETSYS -
SELECTVOLUME(
BACKUP(SCRATCH)
MIGRATION(SCRATCH)
DUMP(SCRATCH))
SCRATCH to SPECIFIC in DUMP, MIGRATION or in BACKUP parameter .
On Sat, May 25, 2013 at 12:22 AM, Staller, Allan wro
DMP.
>
> DEFINE DUMPCLASS (MIGDMP ...
>
>
> Al Staller | Z Systems Programmer | KBM Group | (Tel) 972 664-3565 |
> allan.stal...@kbmg.com
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Jake ande
TSERV.UA.EDU]
> On
> :>: Behalf Of Jake anderson
> :>: Sent: Thursday, May 23, 2013 10:28 PM
> :>: To: IBM-MAIN@LISTSERV.UA.EDU
> :>: Subject: Re: HSM option
> :>:
> :>: Hello,
> :>:
> :>: 1) HSM request for scratch tape, when performing a full volume
command dump."
>
> and
>
> "A given dump volume:
> ...
> Never contains more than one dump copy of the same source volume.
> ..."
>
>
>
> :>: -Original Message-
> :>: From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LIS
Hello All,
In HSM, when we are taking backup of dump class volume, it always
using scratch tape. But we want to change this configuration, so that I
should use existing tape which has data rather then new scratch tape.
We are doing this because we are planning to migrate our 3494 ATL to
mal TEST and more PROD
> work.
>
> You would make sure any TEST job uses CLASS A, and Production would only
> use
> CLASS B. that way you can restrict how much of Class A or Class B runs at
> a
> particular time in the day.
>
>
> Lizette
>
>
> -Origin
job waiting for
> execution?
>
> Regards,
> Kees.
>
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Jake anderson
> Sent: Tuesday, May 07, 2013 11:00
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re
t; Are the jobs running concurrently or just waiting execution?
>
> Lizette
>
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Jake anderson
> Sent: Tuesday, May 07, 2013 1:36 AM
> To: IBM-MAIN@LIST
Hello,
In one of our education system. We find Same Job being Submitted Multiple
Times(8 Times). Apology for my ignorance, Are there any way to restrict the
Duplicate Job Submission when Original One is in Running State ?
Any Suggestions Or help is much Appreciated.
/Jake
-
Hello,
Are there any seperate LISTSERV for zPDT users ?
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
"Ask your vendor whether the new SVC
routine supports the old version of the product."
Yes it does... Thanks
On Tue, Mar 5, 2013 at 7:30 PM, Shmuel Metz (Seymour J.) <
shmuel+ibm-m...@patriot.net> wrote:
> In
> ,
> on 03/05/2013
> at 05:53 PM, Jake anderson
Hello All,
I am Installing a product in my Test Environment where already a back
levelled version is running and the current product is of higher version.
Can we assign the same SVC numbers to the same Product of two different
Versions when two different Versions of same product are running paral
Hello,
We are using TEXT2PDF as a mainframe Output Writer to send the mainframe
Sysout to our MS inbox, but recently we have started experiencing the delay
in Receiving the mail from TEXT2PDF. I can see the responsible nodes are up
and Don't see it anything different.
Has anyone experienced a sim
**"
ACS activation went well but not sure if i am correct.
Jake
On Wed, Feb 6, 2013 at 1:10 PM, R.S. wrote:
> W dniu 2013-02-06 07:19, Jake anderson pisze:
>
> Hello,
>>
>> This could be simple or Dumb question and I apologize for it :) . I have
>> written ACS
Hello,
This could be simple or Dumb question and I apologize for it :) . I have
written ACS routine based on the filtlist criteria but i am just curious to
know if it is possible to write ACS routine(STORCLAS&STORGROUP) based on
user's racf group ? Intention is just to make sure that a user belong
Dear All,
I know this could be a very basic or repetitive question, but I am unable
to find any Clue. Here We are playing around with our Z800 machine(Now used
only for Testing Purpose), We are adding another LPAR to the IODF. So the
currently the scenario is our Reset Profile is "DFLTEST". Now we
Hi,
Just found the below note :
"IBM suggests three alternate methods: the Service Level Reporter (SLR),
the SMF unload utility (IRRADU00), or DF/SORT or a comparable reporting
utility reading the unformatted SMF records. Each of these has advantages
depending on available products at your instal
Hello,
Do we have a syntax checker for jes2parm ? Are there any in built facility
within z/os ?
Any suggestions are highly appreciated.
Jake
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists.
Hello All,
In one of our Z/OS mini system running on VM. While doing a ZFS aggregate
grow I could see it is significantly taking more time comparatively to the
other LPAR which are not part of VM. Has anyone experienced a similar
situation at your shop.
Any thoughts or suggestions are highly appr
> Lizette
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf
> > Of Jake anderson
> > Sent: Monday, December 10, 2012 5:56 AM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: Re: Condi
ume that the previous versions of ADRDSSU would create an output
> > file
> > :>: so
> > :>: that I can open an APAR with IBM.
> > :>:
> > :>:
> > :>:
> > :>: On Fri, Dec 7, 2012 at 1:02 PM, Arthur T.
> > wrote:
> > :>:
> &
" I think it was not done properly."
IEHINITT does as expected with return code 00. Thats why the tape label was
recognized for few volumes during back up. To check if the initialization
had any problem I tried taking a Full volume back up without the
conditional statement and the job ended well.
I even tried with a brand new 3590 tape and it was same abend after some
label. Its a multi-label multi volume volume tape.
On Fri, Dec 7, 2012 at 6:00 PM, David Devine wrote:
> Hello,
> is it possible that your output tape dd has gone onto an additional
> volser? i seem to remember from a
Hope IBM DFSMS dev or Support Can Comment on this. But yes I would be
opening a PMR and Hope it might even need an APAR as well.
On Fri, Dec 7, 2012 at 3:13 PM, Jake anderson wrote:
> "One possible solution would be to change the PROC by adding a step on
> each side of
BM.
On Fri, Dec 7, 2012 at 1:02 PM, Arthur T. wrote:
> On 6 Dec 2012 22:05:56 -0800, in bit.listserv.ibm-main (Message-ID:<
> CAHTvvRWwWAXF7tfZ**RhtvZ9gf54-**kxtMh60qB8JHmtBEUyXWE8g@mail.**gmail.com>)
> justmainfra...@gmail.com (Jake anderson) wrote:
>
> My question is g
Hi,
My question is going to be very general. Our shop has the policy of running
daily back up from Mon-friday on a incremental basis(Volume Level). So we
have been using this Keyword at sysin control card : DATASET(INCLUDE(**)
BY(DSCHA,EQ,YES), which means that the backup would take place only if
Hello Group,
Cross Posting to both Newsgroup.
We have got a requirement of performing CICS screen scrapping using
Biztalk(HIS). Just curious to know if someone has implemented it, if yes I
am particularly interested to know from Z/OS perspective if IBM EE(extender
Enterprise) and OSA card is requ
401 - 500 of 527 matches
Mail list logo