Re: Has D OMVS,P output gone AWOL?

AWOL problem solved. I had FILESYSTYPE TYPE(HFS) ENTRYPOINT(GFSCINIT) ASNAME(NFSC) in one of my members. Remove it and it all works. Colin On Wed, 28 Aug 2024 at 17:32, Colin Paice wrote: > Patrick > F OMVS,PFS=ZFS,QUERY,LOG > gives me output, Query,all gave m

Re: Has D OMVS,P output gone AWOL?

Patrick F OMVS,PFS=ZFS,QUERY,LOG gives me output, Query,all gave me lots of output. At shutdown I got *04 BPXF032D FILESYSTYPE ZFS TERMINATED. REPLY 'R' WHEN READY TO When I start my one pack sysres of the same level, I get some basic stuff out. This makes me think there is a conf

Re: Has D OMVS,P output gone AWOL?

Nothing for zFS?  e.g. BPXF288I Physical file system ZFS is terminating I assume you have FILESYSTYPE(ZFS) in the BPXPRMxx that D OMVS shows is in use? What happens why you try to issue a valid or invalid command directed at ZFS? e.g. F OMVS,PFS=ZFS,command On 28/08/2024 14:26, Colin

Re: Has D OMVS,P output gone AWOL?

BPXF289I Physical file system CINET termination is complete On Wed, 28 Aug 2024 at 14:23, Colin Paice wrote: > D OMVS,O and D OMVS,L are fine. I'll go through and check the startup > messages (again) > I've got definitions like > SUBFILESYSTYPE NAME(TCPIP

Re: Has D OMVS,P output gone AWOL?

D OMVS,O and D OMVS,L are fine. I'll go through and check the startup messages (again) I've got definitions like SUBFILESYSTYPE NAME(TCPIP3) TYPE(CINET) ENTRYPOINT(EZBPFINI) So there should be definitions there. On Wed, 28 Aug 2024 at 13:34, Patrick Loftus wrote: >

Re: Has D OMVS,P output gone AWOL?

Manual says the 042I gets issued "In response to a DISPLAY OMVS operator command where process data was not able to be collected". So you were not able to gather PFS data. Do other OMVS displays look normal, such as D OMVS,O or D OMVS,L ? On 28/08/2024 13:13, Colin Paice wrote

Re: Has D OMVS,P output gone AWOL?

Hi Andy, Thank you. My reply is BPXO042I 12.08.30 DISPLAY OMVS yours is BPXO068I 09.22.18 DISPLAY OMVS Strange Colin On Wed, 28 Aug 2024 at 09:25, Styles, Andy (CIO GIS - Core Infrastructure & IT Operations) <00d68f765d25-dmarc-requ...@listserv.ua.edu> wrote: > Works fine

Re: Has D OMVS,P output gone AWOL?

Works fine here: -D OMVS,P BPXO068I 09.22.18 DISPLAY OMVS 674 OMVS 0010 ACTIVE OMVS=(... PFS CONFIGURATION INFORMATION PFS TYPE ENTRY

Has D OMVS,P output gone AWOL?

On z/OS 2.5 D OMVS,P gave me OMVS 0010 ACTIVE OMVS=(TC,00,01,BP,IZ,RZ,BB,ZW,US) PFS CONFIGURATION INFORMATION PFS TYPE ENTRY ASNAMEDESC STSTART/EXIT TIME INET EZBPFINI N/A SOCKETS I NFS GFSCINIT NFSC REMOTEA 2024

Re: Improving OMVS performance using WLM ?

Classification: Confidential Don't have any references for you, but in my experience, most installations have under-spec'ed the service class for OMVS (either importance or goals). Increasing either for this service class would most likely help. HTH, -Original Message-

Re: Improving OMVS performance using WLM ?

< 057b0ee5a853-dmarc-requ...@listserv.ua.edu> wrote: > Are there any studies, white papers, redbooks, presentations, articles, or > ... that address how to use WLM to effectively improve the performance of > long running shell scripts invoked via (a) TSO OMVS, (b) Batch job, or (c) > ss

Re: Improving OMVS performance using WLM ?

On 21/08/2024 7:25 am, Lionel B. Dyck wrote: Are there any studies, white papers, redbooks, presentations, articles, or ... that address how to use WLM to effectively improve the performance of long running shell scripts invoked via (a) TSO OMVS, (b) Batch job, or (c) ssh? With the script

Re: Improving OMVS performance using WLM ?

articles, or > ... that address how to use WLM to effectively improve the performance of > long running shell scripts invoked via (a) TSO OMVS, (b) Batch job, or (c) > ssh? With the script spawning several address spaces this can be a > challenge. > > Thanks for any pointers. > >

Improving OMVS performance using WLM ?

Are there any studies, white papers, redbooks, presentations, articles, or ... that address how to use WLM to effectively improve the performance of long running shell scripts invoked via (a) TSO OMVS, (b) Batch job, or (c) ssh? With the script spawning several address spaces this can be a

Re: Bash freeware for OMVS

Hi, IBM just GA'd IBM "Open Enterprise foundation for z/OS". You can find bash in there and it's for free. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message

Re: Bash freeware for OMVS

On Sun, 2 Jun 2024 20:19:45 -0400, Matt Hogstrom wrote: >If you’re running 3.1 I believe zsh is included and its becoming more of a >norm and compatible with most bash scripts. > Is it 100% compatible with POSIX shell, which I consider the Gold Standard? (Likewise dash.) >For bash itself, the

Re: Bash freeware for OMVS

If you’re running 3.1 I believe zsh is included and its becoming more of a norm and compatible with most bash scripts. For bash itself, the Open z/OS Tools has a good set of open tools ported to USS. https://github.com/ZOSOpenTools Mike Fulton from IBM who lead the z/OS Open Tools project look

Re: Bash freeware for OMVS

Or - you can get it from IBM via ShopZ for 2.5 or 3.1 - included with your existing S&S Read about it here https://community.ibm.com/community/user/ibmz-and-linuxone/blogs/hyder-naqvi/2024/05/31/open-enterprise-foundation-for-zos?communityKey=64d1d1bd-66bc-4ecb-b9e8-0372b18c5bcb ---

Re: Bash freeware for OMVS

check out https://zosopentools.org/#/ where you can get bash, git, and more -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Bash freeware for OMVS

Hello Group Cross posted Good morning Is there a way I can get a bash freeware from any git site ? I checked rocket software and their site doesn't show the bash freeware Any pointers are appreciated. Jake -- For IBM-MAIN su

Re: looking for RSYNC for OMVS [was: Preferred FTP Client for Windows]

bject: Re: Preferred FTP Client for Windows > >> > >> Co:Z SFTP only talks SSH/SFTP. It sits "on top" of IBM's ported > >> OpenSSH. So you need IBM's OpenSSH installed. > >> > >> To get/put z/OS files you do need to use some special command su

looking for RSYNC for OMVS [was: Preferred FTP Client for Windows]

lksize=0,space=trk.1.1 put //!ZOS.FILE.NAME To get a z/OS file that is text: ls /+mode=text get //ZOS.FILE.NAME To do binary it would be ls /+mode=binary. For OMVS files the get/put are just like any other *nix host. If the files are in EBCDIC you need the ls /+mode=text.  If they are bin

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

CEE3204S The system detected a protection exception (System Completion Code=0C4). From compile unit TOROLABA:./Objects/object.c at entry point PyObject_Hash at statement 769 at compile unit offset +1C3A79B4 at entry offset +0074 at address 1C3A79B4. Segmentat

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

to set a SLIP to catch S0C4 in OMVS separate AS SLIP SET,ID=PJF1,JOBNAME=Z02446*,COMP=0C4,ACTION=SVCD,AL=(H,P,S),SDATA=(ALLNUC,PSA,RGN,LPA,CSA,SQA,TRT,GRSQ,SUM),END As far as I know, the jobname for a fork-child is related to the jobname for a fork-parent (appending ZjQcmQRYFpfptBannerStart

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

SLIP SET,ID=PJF1,JOBNAME=Z02446*,COMP=0C4,ACTION=SVCD,AL=(H,P,S),SDATA=(ALLNUC,PSA,RGN,LPA,CSA,SQA,TRT,GRSQ,SUM),END As far as I know, the jobname for a fork-child is related to the jobname for a fork-parent (appending a single digit unless the original name was 8 characters, or something lik

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

List On Behalf Of > David Crayford > Sent: Monday, July 17, 2023 1:54 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS > > > >>> On 17 Jul 2023, at 12:44 pm, Farley, Peter >>> <031df298a9da-dmarc

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

, July 17, 2023 1:54 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS > On 17 Jul 2023, at 12:44 pm, Farley, Peter > <031df298a9da-dmarc-requ...@listserv.ua.edu<mailto:031df298a9da-dmarc-requ...@listserv.ua.edu>> > wrote:

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

questions about how the Rocket developers are able to test it in the first place. > > Peter > > From: IBM Mainframe Discussion List On Behalf Of > David Crayford > Sent: Sunday, July 16, 2023 7:46 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: How to set a SLIP to c

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

time chasing at shadows. Nailing down the root cause of an issue is not useless. Peter From: IBM Mainframe Discussion List On Behalf Of David Crayford Sent: Sunday, July 16, 2023 7:46 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS It seems to me

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

iscussion List On Behalf Of > Peter Relson > Sent: Sunday, July 16, 2023 9:01 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS > > > > It's not expected that a SLIP dump is required to debug an application error

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

Sent: Sunday, July 16, 2023 3:49 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS This is the latest SLIP setup from today which did not catch the abend when the python script is executed from an ssh login to z/OS on the Zxplore system: SLIP

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

. Peter From: IBM Mainframe Discussion List On Behalf Of Mike Shaw Sent: Sunday, July 16, 2023 4:26 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS Peter, If you can run GTF on the Zxplore system and capture the output, you might want to

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

LISTSERV.UA.EDU > Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS > > > > What SLIP trap did you try setting? SLIP SET,C=0C4,A=SVCD,END will catch > every 0C4 that occurs anywhere. That wouldn't be what I'd want for a SLIP > trap (it's too broad s

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

f yet, or at least none have yet replied to my error report with any questions concerning the contents of that dump. Peter From: IBM Mainframe Discussion List On Behalf Of Peter Relson Sent: Sunday, July 16, 2023 9:01 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

Mainframe Discussion List On Behalf Of Peter Relson Sent: Saturday, July 15, 2023 8:26 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS What SLIP trap did you try setting? SLIP SET,C=0C4,A=SVCD,END will catch every 0C4 that occurs anywhere. That

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

It's not expected that a SLIP dump is required to debug an application error (whether it's a segment fault or anything else). Quite the reverse. So in what way was the CEEDUMP and/or transaction dump not adequate? That should be brought to the attention of the LE team. Peter Relson z/OS Core T

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

an SVCDUMP after the python >> program terminates would be at all helpful, but I am not an expert in that >> area either. >> >> Again, thanks for trying to help. >> >> Peter >> >> From: IBM Mainframe Discussion List On Behalf Of >> Jon Perryman

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

scussion List On Behalf Of > Jon Perryman > Sent: Saturday, July 15, 2023 11:28 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS > > As you discovered, S0C4 SLIPs are at the best of times a pain in the a$$. > S0C4 is difficult becau

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

What SLIP trap did you try setting? SLIP SET,C=0C4,A=SVCD,END will catch every 0C4 that occurs anywhere. That wouldn't be what I'd want for a SLIP trap (it's too broad so will hit on things you don't want). But it would work. But only once (default match limit for A=SVCD is one). Either there wa

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

f Jon Perryman Sent: Saturday, July 15, 2023 11:28 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS As you discovered, S0C4 SLIPs are at the best of times a pain in the a$$. S0C4 is difficult because it has a real use which is to determine if a

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

ed abend, at the same offset every time > (though the actual address changes). > > Peter > > From: IBM Mainframe Discussion List On Behalf > Of Farley, Peter > Sent: Saturday, July 15, 2023 2:18 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: How to set a SLIP to c

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

very time > (though the actual address changes). > > Peter > > From: IBM Mainframe Discussion List On Behalf > Of Farley, Peter > Sent: Saturday, July 15, 2023 2:18 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS >

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

Peter From: IBM Mainframe Discussion List On Behalf Of Farley, Peter Sent: Saturday, July 15, 2023 2:18 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS Thanks for trying to help Jon, but “IBM” hasn’t *officially* looked at anything.  The python ib

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

actual address changes). Peter From: IBM Mainframe Discussion List On Behalf Of Farley, Peter Sent: Saturday, July 15, 2023 2:18 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS Thanks for trying to help Jon, but “IBM” hasn’t *officially* looked at

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

: Saturday, July 15, 2023 11:28 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: How to set a SLIP to catch S0C4 in OMVS separate AS As you discovered, S0C4 SLIPs are at the best of times a pain in the a$$. S0C4 is difficult because it has a real use which is to determine if a page has been created (not

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

As you discovered, S0C4 SLIPs are at the best of times a pain in the a$$. S0C4 is difficult because it has a real use which is to determine if a page has been created (not just allocated). It requires multiple SLIP IGNORE which can be obtained from IBM. Since you are working with IBM support, I

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

How about SLIP SET,COMP=0c4,ACTION=SVCD and do not specify any address space etc Colin On Sat, 15 Jul 2023 at 01:17, Farley, Peter < 031df298a9da-dmarc-requ...@listserv.ua.edu> wrote: > Hi All, > > I am trying to help the python ibmdb team help me solve an S0C4 abend > issue with (we think

Re: How to set a SLIP to catch S0C4 in OMVS separate AS

On Sat, 15 Jul 2023 00:16:23 +, Farley, Peter wrote: >... >Any and all assistance to help us catch this abend and generate the SVCDUMP >that the ibmdb team have requested to help solve the root cause would be much >appreciated. > No assistance, but an observation that SLIP has appeared to

How to set a SLIP to catch S0C4 in OMVS separate AS

Hi All, I am trying to help the python ibmdb team help me solve an S0C4 abend issue with (we think maybe) their code on the IBM Zxplore LPAR by generating an SVCDUMP that the ibmdb team could analyze. The admins at Zxplore have tried a couple of times to set a SLIP to catch the S0C4 abend that

Re: OMVS Man Pages

On Thu, 11 May 2023 07:25:07 -0500, Lionel B. Dyck wrote: >Please check out this IBM Idea (aka requirement) that I just posted >regarding the OMVS Man pages and vote and/or comment > >https://ibm-z-hardware-and-operating-systems.ideas.ibm.com/ideas/ZOS-I-3685 > It's a tou

Re: OMVS Man Pages

Dear Lionel, Good post. Regards, Suresh On Thu, May 11, 2023, 4:25 PM Lionel B. Dyck wrote: > Please check out this IBM Idea (aka requirement) that I just posted > regarding the OMVS Man pages and vote and/or comment > > https://ibm-z-hardware-and-operating-systems.ideas.ibm.com

OMVS Man Pages

Please check out this IBM Idea (aka requirement) that I just posted regarding the OMVS Man pages and vote and/or comment https://ibm-z-hardware-and-operating-systems.ideas.ibm.com/ideas/ZOS-I-3685 The prose is: = The current

Re: OMVS File System Automove question

I did that, it didn't change from what I could see. I might open a question to IBM support. See what they say. Mark Jacobs Sent from ProtonMail, Swiss-based encrypted email. GPG Public Key - https://api.protonmail.ch/pks/lookup?op=get&search=markjac...@protonmail.com --- Original Messag

Re: OMVS File System Automove question

On Mon, 20 Mar 2023 14:42:41 +, Mark Jacobs wrote: >Thanks, no I didn't think of the chmount command. I ran a test on my sandbox. >the /u directory is showing that automove will exclude the system I specified, >but the file systems mounted under it don't show that attribute, just >Automov

Re: OMVS File System Automove question

Thanks, no I didn't think of the chmount command. I ran a test on my sandbox. the /u directory is showing that automove will exclude the system I specified, but the file systems mounted under it don't show that attribute, just Automove=Y. Do I need to change the mount attribute for all automount

Re: OMVS File System Automove question

On Mon, 20 Mar 2023 13:04:44 +, Mark Jacobs wrote: >Thanks, but that's not helpful in my situation. The problematic file system is >under /u which is under the sysplex root, That has to be automove. > >Mark Jacobs > Correct. Then the only way to "avoid" a lpar is to avoid it with the s

Re: OMVS File System Automove question

king at that and testing somethings in our sandbox > > environment. The problematic file system that's already impacted us twice > > is being managed by automount and I can't see anyway to instruct OMVS not > > to automove filesystems that are managed by the autom

Re: OMVS File System Automove question

On Mon, 20 Mar 2023 12:03:28 +, Mark Jacobs wrote: >I've been looking at that and testing somethings in our sandbox environment. >The problematic file system that's already impacted us twice is being managed >by automount and I can't see anyway to instr

Re: OMVS File System Automove question

I've been looking at that and testing somethings in our sandbox environment. The problematic file system that's already impacted us twice is being managed by automount and I can't see anyway to instruct OMVS not to automove filesystems that are managed by the automount polic

Re: OMVS File System Automove question

This link has more details about file system movement/ownership during recovery scenarios. https://www.ibm.com/docs/en/zos/2.4.0?topic=recovery-managing-movement-data -- For IBM-MAIN subscribe / signoff / archive access instruct

Re: OMVS File System Automove question

Check the INCLUDE/EXCLUDE parameters on the MOUNT statements in BPXPRMxx https://www.ibm.com/docs/en/zos/2.4.0?topic=parameters-statements-bpxprmxx -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to

OMVS File System Automove question

When the owning system is removed from the sysplex is there a way to influence which remaining systems becomes the owner of the file system? I'd like a way to tell OMVS not to assign any automoved file systems to one specific system in the sysplex. Mark Jacobs Sent from [ProtonMail](

Re: ZFS File System Recall, Hanging OMVS

as seen this before. We > have an open case with IBM support too. > > - OMVS attempted to recall a migrated user zFS file system on a system > where we're not running DFSMSHSM. > - We didn't realize this for quite a while, 20-30 minutes or so. > - OMVS services on other

ZFS File System Recall, Hanging OMVS

This past weekend we experienced a somewhat unusual problem, with unexpected side effects. Wondering if anyone else has seen this before. We have an open case with IBM support too. - OMVS attempted to recall a migrated user zFS file system on a system where we're not running DFSMSHSM.

Re: OMVS

/1/2023 8:22 AM, Allan Staller wrote: Classification: Confidential I strongly suggest setting up sysplex file sharing for OMVS. This is pretty straight forward. See the USS Planning guide. Your service mountpoints would then be hung off of a directory in the OMVS sysplex root (as opposed to the

Re: OMVS

Classification: Confidential I strongly suggest setting up sysplex file sharing for OMVS. This is pretty straight forward. See the USS Planning guide. Your service mountpoints would then be hung off of a directory in the OMVS sysplex root (as opposed to the system root). HTH, -Original

Re: OMVS

I assume you're not zfs file sharing? I usually don't mount etc or dev unless I'm doing an upgrade, but if you're not sharing the /SERVICE/ filesystems then yes you need to create the mount points first - then remount them on the moved-to LPAR Carmen On 1/31/2023 12:56 PM, Steve Beaver wrote:

OMVS

I need to move my SMPe from one LPAR to another. My concern are my MOUNTPOINTS. My current zFS is ETC with a mountpoint of /SERVICE/MVS1/etc Do I need to mount the MP and go create the /SERVICE/DEV1/etc Then UNMOUNT and MOUNT it again as /DEV1/etc Regards, St

Re: z/OS CP037 and OMVS CP1047

alk to it (POST) using JSON. I had never written EXEC CICS WEB or TRANSFORM code before, nor worked with DFHJS2LS or created JSON schemas. Was it a good experience? I have now gotten the POST to work while leaving my OMVS process in CP1047 and not using the jetty encoding java option. I'

Re: z/OS CP037 and OMVS CP1047

itten EXEC CICS WEB or TRANSFORM code before, nor worked with DFHJS2LS or created JSON schemas. I have now gotten the POST to work while leaving my OMVS process in CP1047 and not using the jetty encoding java option. I've never worked with jetty either. Currently, the jar is running under

Re: z/OS CP037 and OMVS CP1047

I wouldn't stray outside of IBM-1047 for OMVS other than ISO8859-1. Are you sure your issue is not server side with Jetty? I would try setting the -Dfile.encoding=ISO8859-1 java option. I would also strongly suggest using the JZOS batch launcher and not BPXBATCH for running Java pro

z/OS CP037 and OMVS CP1047

In all my years I never realized that OMVS uses CP1047. What I am trying to configure is giving me fits. I have a CICS program that is trying to do a WEB CONVERSE with an embedded jetty server jar running under BPXBATCH. I might find that running the server this way will not work, but I am

Re: omvs man pages

On Fri, 16 Sep 2022 19:31:36 +0200, Peter Sylvester wrote: >I "like" this one: > >https://www.ibm.com/docs/pt-br/zos/2.3.0?topic=messages-fsumf061 > Where I read: User response Format this man page on a system that supports nroff or troff. Then return the formatted man page to

Re: omvs man pages

I "like" this one: https://www.ibm.com/docs/pt-br/zos/2.3.0?topic=messages-fsumf061 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: omvs man pages

your character than your reputation. Character is what you are, reputation merely what others think you are.” - - - John Wooden -Original Message- From: IBM Mainframe Discussion List On Behalf Of Mike Schwab Sent: Friday, September 16, 2022 9:24 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject

Re: omvs man pages

m. > > On Fri, Sep 16, 2022 at 6:24 AM Lionel B. Dyck wrote: > > > The issue isn't with MANPATH - when you issue the command: man -k . > > > > It reports a summary of 'all available' man pages. > > > > And when you issue: man -k xxx > >

Re: omvs man pages

man pages. > > And when you issue: man -k xxx > > It will report 'all' the man pages that have xxx > > The OMVS man command does *not* search the MANPATH but the information in > the EPH.SEPHTAB dataset. > > Thus Rocket, Co:Z, etc. man pages will never be

Re: omvs man pages

The issue isn't with MANPATH - when you issue the command: man -k . It reports a summary of 'all available' man pages. And when you issue: man -k xxx It will report 'all' the man pages that have xxx The OMVS man command does *not* search the MANPATH but the inform

Re: omvs man pages

Yes exactly what I did. I added the rocket paths to the MANPATH in /etc/profile. On Thu, Sep 15, 2022 at 3:10 PM Peter Sylvester wrote: > Yes, the rocket anaconda stuff has man files that you can add to MANPATH. > > in OMVS /et

Re: omvs man pages

Yes, the rocket anaconda stuff has man files that you can add to MANPATH. in OMVS /etc/profile # == #MANPATH environment variable # # Specifies the list of

Re: omvs man pages

On Thu, 15 Sep 2022 21:34:34 +0200, Peter Sylvester wrote: >>> >> A more recent edition: >> >> >>> BUT - is there a way to update this with additional man pages - say some >> >from Rocket (i.e. curl) ?M > >> Bummer. I woul

Re: omvs man pages

On 15/09/2022 21:18, Paul Gilmartin wrote: On Thu, 15 Sep 2022 13:56:38 -0500, Lionel B. Dyck wrote: This explains how to enable the man pages in omvs https://www.ibm.com/docs/en/zos/2.1.0?topic=utilities-enabling-man-pages A more recent edition: <https://www.ibm.com/docs/en/zos/2.3.0?to

Re: omvs man pages

I added the rocket stuff to my MANPATH in my global profile. On Thu, Sep 15, 2022 at 1:57 PM Lionel B. Dyck wrote: > This explains how to enable the man pages in omvs > https://www.ibm.com/docs/en/zos/2.1.0?topic=utilities-enabling-man-pages > > BUT - is there a way to upda

Re: omvs man pages

On Thu, 15 Sep 2022 13:56:38 -0500, Lionel B. Dyck wrote: >This explains how to enable the man pages in omvs >https://www.ibm.com/docs/en/zos/2.1.0?topic=utilities-enabling-man-pages > A more recent edition: <https://www.ibm.com/docs/en/zos/2.3.0?topic=utilities-enabling-man-pages

omvs man pages

This explains how to enable the man pages in omvs https://www.ibm.com/docs/en/zos/2.1.0?topic=utilities-enabling-man-pages BUT - is there a way to update this with additional man pages - say some from Rocket (i.e. curl) ? Thanks Lionel B. Dyck <>< Website: https://www.lbdsoftware.c

Re: OMVS/ASCII funny

Well, the obvious answer, chcp isn't allowed under he TSO/E OMVS command. What about changing the locale? -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Colin

OMVS/ASCII funny

Thanks to those that offered help (some were offline). When I set the code page of the OMVS terminal, it works f.cvtcmd = SETAUTOCVTON ; f.fccsid = 0x0417 ; // set this f.pccsid = 0x ; // ignore this * rc =fcntl( STDOUT_FILENO,action, &f ); * it works. Before Python the fil

Re: OMVS/ASCII funny

On Aug 18, 2022, at 6:20 AM, Colin Paice mailto:colinpai...@gmail.com>> wrote: What is Python doing to make it work... ( or to ask the opposite question) and why does it not work before I invoke Python. I thought that even with the -qascii option the program should work, as the printf uses the

OMVS/ASCII funny

I enter USS using TSO OMVS I have a c "Hello World" which runs successfully in OMVS. I recompile it, with the -qASCII option... If I execute it - it displays çÁ%%?-ï?Ê%À- which is the ASCII of the output. If I then run python3 --version, my little program prints hello world

Re: OMVS trace buffer mapping

> > > >I would like a macro or DSECT(s) that map the OMVS trace buffer. > >Regards, Pierre. > > > >-- > >For IBM-MAIN subscribe / signoff / archive access ins

Re: OMVS trace buffer mapping

Due to the complexity of the analysis, why would not IPCS formatting meet your needs? Michael At 08:38 AM 5/24/2022, Pierre Fichaud wrote: I've seen the first 2 already. I looked at the last link. I would like a macro or DSECT(s) that map the OMVS trace buffer. Regards, P

Re: OMVS trace buffer mapping

I've seen the first 2 already. I looked at the last link. I would like a macro or DSECT(s) that map the OMVS trace buffer. Regards, Pierre. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to

Re: OMVS trace buffer mapping

ix-system-services-omvs.html>Tracing UNIX System Services (OMVS) (broadcom.com) * <https://silo.tips/download/diagnosing-problems-in-a-unix-system-services-environment>[PDF] Diagnosing Problems in a UNIX System Services Environment - Free Download PDF (silo.tips) At 01:33 PM

OMVS trace buffer mapping

I can't find a mapping for this. I've scoured the USS and MVS bookshelves. I've done some Internet searches. Can someone help me ? Thanks in advance, Pierre. -- For IBM-MAIN subscribe / signoff / archive access instructions, send

Re: Date and time - MVS and OMVS

List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Paul Gilmartin [000433f07816-dmarc-requ...@listserv.ua.edu] Sent: Thursday, April 7, 2022 9:27 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Date and time - MVS and OMVS On Thu, 7 Apr 2022 12:05:20 +, Seymour J Metz wrote: >I think that it w

Re: Date and time - MVS and OMVS

On Thu, 7 Apr 2022 08:34:00 -0500, Jay Maynard wrote: >To be pedantic, TZ does not itself contain the rules for DST. > 503 $ uname -s; tail -1 /etc/localtime Linux MST7MDT,M3.2.0,M11.1.0 ^^ I call that "the rules for DST." >That's the domain of the timezone database, tzinfo. >

Re: Date and time - MVS and OMVS

I don't recall ever seeing a Unix system that had that specified. It also does not convey information on what the rules were at some point in the past, like tzinfo does. On Thu, Apr 7, 2022 at 9:28 AM Steve Smith wrote: > So what is "setenv TZ GMT00BST-01,M3.4.0/01:00,M10.4.0/01:00", chopped > l

Re: Date and time - MVS and OMVS

So what is "setenv TZ GMT00BST-01,M3.4.0/01:00,M10.4.0/01:00", chopped liver? sas On Thu, Apr 7, 2022 at 9:34 AM Jay Maynard wrote: > To be pedantic, TZ does not itself contain the rules for DST. That's the > domain of the timezone database, tzinfo. > >

Re: Date and time - MVS and OMVS

To be pedantic, TZ does not itself contain the rules for DST. That's the domain of the timezone database, tzinfo. Now, what I'd go for is to use tzinfo - which is well understood and well maintained - to set both the CLOCKxx and TZ parameters. That would probably require sticking it in a SYS1 data

Re: Date and time - MVS and OMVS

On Thu, 7 Apr 2022 12:05:20 +, Seymour J Metz wrote: >I think that it would be easier to enhance the processing of CLOCKxx for DST. >There is a lot that is in CLOCKxx and not in TZ. > TZ is a POSIX requirrement:

  1   2   3   4   5   6   7   8   9   10   >