On a slightly different DEDICATE topic. I'm wondering if anyone is using
the CP DEDICATE command to dedicate a virtual CPU to a real (logical) CPU
.
My impression is there is not much use of that function, but I would like
to
find out for sure if there is. Feel free to contact me offline:
I am not using lately(last 3 months) but normally I use dedicate cpu on
zvm second level.
Thanks
From: Mark Lorenc/Endicott/IBM@IBMUS
To: IBMVM@LISTSERV.UARK.EDU
Date: 06/06/2011 07:52 AM
Subject:CPU Dedicate
Sent by:The IBM z/VM Operating System
We have a legacy (pejorative intended) program named REXXDATE MODULE for which
we have no source. It is dated 8/3/1994, which predates my arrival at Visa.
Does anyone know if this is something that was made generally available to the
VM community and, if so, is the source available? I has
I am able to send messages to a z/OS TSO userid using the RSCS command
MSG from z/VM.
How would the TSO userid send a message to me on the z/VM node?
z/VM node is DIS3081. Z/OS node is MVSSYS.
Would the z/OS TSO userid be able to issue commands to the z/VM system
or would PROP be involved?
TIA
Do you know what this module is capable of? Perhaps there's a suitable
replacement.
Frank M. Ramaekers Jr.
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On
Behalf Of Schuh, Richard
Sent: Monday, June 06, 2011 11:39 AM
To:
In terms of performance, here are the key factors between
Dedicated and Minidisks:
1. Dedicated DASD is not eligible for MDC, while minidisks
(full pack and partial pack) are eligible.
2. Some hardware Storage Servers do not handle the I/Os that
CP generates for partial, and in some cases,
I do recall this function and even used it (trying to find archives) back in
the pre-Y2K conversions. The internal DATE() function in REXX seems to
provide most of what is needed, though. You can translate date formats ..
and I usually do date calculations using DATE('B). I'm pretty sure
Richard,
I found a copy of the source and the memo file in one of my old archives.
I
suspect it was from a tools tape.
I'll send it to you offline.
... Russ Burtnett
P.S. No packrat comments please.
Archivists are the gold of the VM community!
Les
Russ Burtnett wrote:
Richard,
I found a copy of the source and the memo file in one of my old archives.
I
suspect it was from a tools tape.
I'll send it to you offline.
... Russ Burtnett
P.S. No packrat comments please.
Don't know if it still works or what authorizations might be required, but
at one time you could use the operator send command: se 'your
message',njenode.userid
or something to that effect.
--
Mike Harding
z/VM System Support
mhard...@us.ibm.com
mike.b.hard...@kp.org
mikehard...@mindless.com
Please use TSO XMIT command - provided RACF doesn't prevent you VMRDR.
Regards,
Tom
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On
Behalf Of Michael Harding
Sent: Monday, June 06, 2011 1:30 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Sending messages to z/OS from
I fully agree with the retirement of these programs. If DATE() doesn't fill the
bill, something else may.
Regards,
Richard Schuh
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Scott Rohling
Sent: Monday, June 06, 2011
Russ,
Thanks. Do you also have TOD EXEC? It appears that it is what has been calling
REXXDATE. I would like to bring them into the 21st century. :-)
Regards,
Richard Schuh
-Original Message-
From: The IBM z/VM Operating System
[mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of
As did Russ, I also have the REXXDATE MODULE, ASSEMBLE, and MEMO files.
When XEDITing, the MODULE gives no clue as to the author, etc.
The file dates are all: 1/22/88
The files are loaded from the 1987 VM Workshop Tools tape at Brigham Young
University.
On the off chance that Russ has a
The start is the same.
Regards,
Richard Schuh
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf
Of Mike Walter
Sent: Monday, June 06, 2011 10:42 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: REXXDATE MODULE
As did Russ, I also
Richard,
Nope, no TOD EXEC found.
The dates on my REXXDATE files were from April 1987.
Russ
Jim,
From TSO you can use: XMIT (or TRANSMIT) node.userid
That places you into EDIT on a file permitting multiple lines to be
entered, after which you press PF3 to send the file.
The message appears as a reader file on the node.userid on the target VM
system.
See:
I am looking for something which sends a message our z/VM prop machine
which in turn executes a rexx procedure.
Jim Hughes
Consulting Systems Programmer
Mainframe Technical Support Group
Department of Information Technology
State of New Hampshire
27 Hazen Drive
Concord, NH
Please CMS Pipe with starmsg! If u need further, please contact me
privately.
Regards,
Tom
-Original Message-
From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On
Behalf Of Hughes, Jim
Sent: Monday, June 06, 2011 2:09 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re:
This receives the message in z/VM.
I need to send it from z/OS first. This is where I am stumped. I have
a few replies which I've not tested (yet).
Jim Hughes
Consulting Systems Programmer
Mainframe Technical Support Group
Department of Information Technology
State of New
So... where does the command issuer run... e.g. as a TSO user, as a batch
job, other?
If they have the proper privilege on z/OS, they could issue the JES2
command:
$Nn#;nodename userid 'message text here'
Where the '#' is the JES2 node number of your target z/VM system.
The message
On Monday, 06/06/2011 at 12:41 EDT, Hughes, Jim jim.hug...@doit.nh.gov
wrote:
I am able to send messages to a z/OS TSO userid using the RSCS command
MSG from z/VM.
How would the TSO userid send a message to me on the z/VM node?
z/VM node is DIS3081. Z/OS node is MVSSYS.
Would the z/OS
Alan,
How do I use TSO to send the message to z/VM operator at node DIS3081?
Jim Hughes
Consulting Systems Programmer
Mainframe Technical Support Group
Department of Information Technology
State of New Hampshire
27 Hazen Drive
Concord, NH 03301
603-271-5586Fax
On Monday, 06/06/2011 at 02:31 EDT, Hughes, Jim jim.hug...@doit.nh.gov
wrote:
How do I use TSO to send the message to z/VM operator at node DIS3081?
TRANSMIT (XMIT). It's been a while, but IIRC the basics are:
XMIT DIS3081.OPERATOR MSG
will prompt the issuer.
XMIT DIS3081.OPERATOR
24 matches
Mail list logo