Mr McDonough,
The z/VM second level system is the last bastion of
WildWestSystemProgramming, you can do anything you want, any way you want
.
( as long as it doesn't crash your first-level, of course ).
You have two approaches, really, if you have an LPAR environment availabl
e.
Approach 1 is
Steve, they're obtainable from ShopZSeries. Is your ShopZSeries customer
record correct? I.e., does it show you have a valid licence for DB2/VM
7.5? If so, just follow the Yellow Brick ShopZSeries Road down the
Primrose Path, I think the sequence is something like create new softwar
e
Congrats, Roland! You DB2/VM'ers and the z/VM folks in Endicott put a lo
t
of hard work into chasing this one down, obscure as it was, and now
apparently nailing it.
It won't be the Titanic if the iceberg isn't there, any more.
On Tue, 9 Feb 2010 11:53:58 -0800, Roland P. Chung
Does anyone know a way to invoke the Make Override panels in a sort
of stand-alone manner? Without invoking VMFINS ?
It may be my imagination, but I seem to recall a way to do so in some
earlier release of z/VM, or maybe it was even back in the VM/ESA days.
I've tried various combinations of
Works splendidly! Thank you, Mr. Donovan.
On Thu, 11 Feb 2010 16:53:20 -0500, Michael Donovan dono...@us.ibm.com
wrote:
The following little exec is a quick and dirty form of getting VMFMKOVR
working. This does assume
as input a product id (prodid) and a component id (compid) where the
Typing is good for my arthritis; it saves me a fortune at the pharmacy.
On Thu, 28 Jan 2010 22:55:57 -0500, Les Koehler vmr...@tampabay.rr.com
wrote:
Using WORDPOS() would be a *lot* more efficient and easier
to type!
Les
You can test the FILETYPE ( or FILENAME or FILEMODE ) within PROFILE XEDI
T
and set your CASE to whatever you want based on what the variable extract
s
for you. Sample:
/*PROFILE changed to REXX */
trace off
'extract /FT/'
if ftype.1 = 'EXEC' |,
ftype.1 = 'REXX' |,
ftype.1
Page 618 of the Planning/Admin manual has a section that discusses What
Devices Can Be Cached with a sub-section of 'does not apply'. DDR, bein
g
the animal that it is, may not even want to get involved with anything
resembling caching activity.
On Wed, 27 Jan 2010 15:02:40 -0600, Phil
Yes, I just went live with z/VM 5.4 at RSU 901 and I'm experiencing the
exact same problem.
There's no Command started message, there IS a Command completed
message, and the FLASHCOPY doesn't run, it can't be seen with a Q FLASHCO
PY
and it can't be seen in the Copy Services GUI of the
...@gmail.co
m
wrote:
You might look at UM32894, in the PSP bucket for RSU903. It was the
only thing that came up (resolves two APARs) when I searched IBMLink
for flashcopy z/VM 5.4
Ron
On Tue, Jan 26, 2010 at 1:51 PM, C. Lawrence Perkins
vmwiz...@ix.netcom.com wrote:
Yes, I just went live with z
Rats; and I was hoping I could swear off swearing :-)
On Mon, 13 Jul 2009 17:21:29 -0400, Alan Altmark alan_altm...@us.ibm.com
wrote:
Installation of z/VM 6.1 will be just like installation of prior release
s.
Alan Altmark
z/VM Development
IBM Endicott
Mr Vandersluiszen,
Here's an RSCS definition I'm using right now to print PostScript files t
o
an IBM InfoPrint 2090E over TCP/IP:
LINKDEFINE US177 TYPE LPR QUEUE FIFO FORM * AST
PARM US177 EXIT=LPRXONE TCPID=TCPIP163 #
HOST=2xx.1x.2xx.177 EPARM='C=LPR S=N FF=N' PRINTER=
-Original Message-
From: The IBM z/VM Operating System
[mailto:ib...@listserv.uark.edu] On Behalf Of C. Lawrence Perkins
Sent: Friday, June 12, 2009 6:39 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Control Data Backups
On Fri, 12 Jun 2009 14:52:40 -0700, Schuh, Richard
rsc
On Fri, 12 Jun 2009 14:52:40 -0700, Schuh, Richard rsc...@visa.com wrot
e:
Suppose I have two filepools called SFS1 and SFS2. Would having each do
control data backups to the other cause problems. For purposes of this
discussion, assume that they would not do the backups concurrently and th
ISPF for VM is one of those semi-VMSES/E products. It's so old it
predates the rigourous methodology of VMSES/E and had its own install
method based on an install tool EXEC from earlier versions of VM.
The z/VM 5.4 SDO Directory
http://www.vm.ibm.com/sdo/sdozv54.pdf
has a section on
have is the z/VM 5.4 SDO media. If I need an additional ISPF
product tape, I will need to order it.
Thanks,
Dave
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of C. Lawrence Perkins
Sent: Tuesday, May 05, 2009 4:17 PM
To: IBMVM
System
[mailto:ib...@listserv.uark.edu] On Behalf Of C. Lawrence Perkins
Sent: Tuesday, May 05, 2009 4:17 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: ISPF Post-z/VM Installation
ISPF for VM is one of those semi-VMSES/E products. It's so
old it predates the rigourous methodology of VMSES/E
Be sure to also check the DMSPARMS files for the filepools and pull
any REMOTE statement that might be in them.
On Tue, 5 May 2009 13:20:46 -0700, Stricklin, Raymond J
raymond.j.strick...@boeing.com wrote:
Folks;
I would like to join three VM nodes to an existing ISFC collection, with
Hello Mr. Jones,
I think I may already be running that later version, I believe I got it
from your site, but I'll D/L it again and give it a try. Thanks!
CLP
On Mon, 15 Dec 2008 10:29:06 -0600, Dave Jones d...@vsoft-software.com
wrote:
Hi, Lawrence
You might try running a later version
Thank you, Ivica, but MAXCONN isn't the problem; the CSISQL02 server
doesn't have any other CONNECT'ed users when I try this from the remote
system via IPGATE. Under normal use, I've had as many as 20 users
CONNECT'ed to CSISQL02 from the host and/or another system via an ISFC li
nk.
I
)
IPGATEI19 ended.
Any suggestions for what I could trace on the target IPGATE that might sh
ed
some more clues ?
Thanks!
On Sat, 13 Dec 2008 21:04:54 +0100, Rob van der Heij rvdh...@gmail.com
wrote:
On Sat, Dec 13, 2008 at 7:37 PM, C. Lawrence Perkins
vmwiz...@ix.netcom.com wrote
Hello Kris,
Well, I have now. And the SENDCNF macro IPCODE discussion sends me to
another section of the CP PrgSvcs manual where X'0201' says...
X'0210' DEALLOCATE_ABEND_PROG
Ok. Something's ABEND'ing it's not my DB2/VM server... it's not IPGA
TE
on my target system. Guess it's time
Hello, I hope someone can help or point me in the right direction to a
solution.
I am trying to use the IPGATE product to allow a DB2/VM requester client
on
z/VM System A ( using ISQL, in this case ) to CONNECT to a DB2/VM serve
r
on z/VM System B. I only have TCP/IP communication between
might be.
I'll try that CMECT call and see if it yields any new clues.
Thanks!
On Sat, 13 Dec 2008 21:04:54 +0100, Rob van der Heij rvdh...@gmail.com
wrote:
On Sat, Dec 13, 2008 at 7:37 PM, C. Lawrence Perkins
vmwiz...@ix.netcom.com wrote:
I have IPGATE working just fine to access
Thanks to all who responded. We found a solution, buried in NUCON is a b
it
that tells CMS if it's to use OS-style or VSE-style SVC's and by finaglin
g
that bit at just the right time going in and out of our routines, we have
tricked everybody involved - RPG, ISPF, DB2/UDB and DB2/VM - into
25 matches
Mail list logo
