I had an incident where VMUTIL abended, but AUDITOR didn't detect it:
DMSFRO159E Insufficient storage available to satisfy free storage
request from 01139EFE
DMSMOD109S Virtual storage capacity exceeded
PIPCOM1296I ABEND in CMS command. Last 2 lines of output follow.
PIPMSG003I ... Issued
Just a thought.. You could have a TIMES entry on VMUTIL that wakes up each
minute and does nothing.. (or something simple like Q TIME) -- the
timestamp of the TIMES file could be checked by AUDITOR -- if it hasn't been
updated in the last minute - then suspect it is down and recycle.
Scott
AUDITOR is supposed to detect CP disabled wait states, but you just had a
CMS program abend which left CMS running. AUDITOR will not help you with
that unless, as you determined, you write your own exit routine. These kind
of failures are usually detected the best way by watching the console,
On Tuesday, 08/02/2011 at 02:19 EDT, Bruce Hayden bjhay...@gmail.com
wrote:
AUDITOR is supposed to detect CP disabled wait states, but you just had
a CMS
program abend which left CMS running. AUDITOR will not help you with
that
unless, as you determined, you write your own exit routine.
...
__
Clovis
From:
Frank M. Ramaekers framaek...@ailife.com
To:
IBMVM@listserv.uark.edu
Date:
02/08/2011 13:13
Subject:
CMS Utilities AUDITOR and VMUTIL
Sent by:
The IBM z/VM Operating System IBMVM@listserv.uark.edu
I had an incident where VMUTIL abended
On: Tue, Aug 02, 2011 at 11:12:24AM -0500,Frank M. Ramaekers Wrote:
} Perhaps, I need a TEST EXIT, but I'm not sure how to test that VMUTIL is
} operating properly.
Send it a command, the result of the command being an SMSG back to the
command origin.
--
Rich Greenberg Sarasota, FL, USA
I'm trying to start AUDITOR and I get:
DMSCYA2301S Insufficient privilege class for command: DCP.
I cannot find this command (and therefore what privilege class it
needs).
Anyone?
TIA,
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life
You need APAR VM64564.
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Frank M. Ramaekers
Sent: Monday, November 09, 2009 9:34 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: CMS Utilities - Auditor
I'm trying to start AUDITOR and I get
...@listserv.uark.edu] On
Behalf Of Frank M. Ramaekers
Sent: Monday, November 09, 2009 11:34 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: CMS Utilities - Auditor
I'm trying to start AUDITOR and I get:
DMSCYA2301S Insufficient privilege class for command: DCP.
I cannot find this command (and therefore what privilege
Operating System [mailto:ib...@listserv.uark.edu] On
Behalf Of Imler, Steven J
Sent: Monday, November 09, 2009 11:10 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: CMS Utilities - Auditor
What release of z/VM are you running? I think DCP was officially
deprecated as a valid CP command as of z/VM 5.3.
JR
@LISTSERV.UARK.EDU
Subject: Re: CMS Utilities - Auditor
What release of z/VM are you running? I think DCP was officially
deprecated as a valid CP command as of z/VM 5.3.
JR (Steven) Imler
CA
Senior Sustaining Engineer
Tel: +1-703-708-3479
steven.im...@ca.com
-Original Message-
From: The IBM
On Monday, 11/09/2009 at 02:01 EST, Kris Buelens kris.buel...@gmail.com
wrote:
As far as I remmeber, DCP was only valid in VM/SP and HPO. The VM/XA
derivates
all have D Host iso DCP.
Until recently, several VM/SP commands were valid z/VM commands,
including DCP. You would get an error
12 matches
Mail list logo
