Not that it matters,
In my situation, this is what worked.
Update MPROUTE CONFIG
Update sysname TCPIP
Update directory entry for TCPIP
set vswitch vswitch1 disconnect
set vswitch vswitch1 rdev 2f00
set vswitch vswitch1 connect
force tcpip
autolog tcpip
set vswitch vswitch2 disconnect
set vswit
Thanks, Alan
Maybe what I'm attempting can't be done without bouncing TCPIP or IPL'ing
the system. I got this error:
set vswitch vswitch1 disconnect
Command complete
Ready;
HCPSWU2830I VSWITCH SYSTEM VSWITCH1 status is disconnected requiring
operator intervention.
set vswitch vswitch1 rdev 27
On Monday, 03/07/2011 at 01:27 EST, Steve Harman
wrote:
> I'm missing something about the CONTROLLER. When I tried to remove the
o
> ld
> OSA from VSWITCH1, I got this error
>
> set vswitch vswitch1 rdev 2708
>
> HCPSWU2830I VSWITCH SYSTEM VSWITCH1 status is ready.
> HCPSWU2830I DTCVSW2 is VS
I'm missing something about the CONTROLLER. When I tried to remove the o
ld
OSA from VSWITCH1, I got this error
set vswitch vswitch1 rdev 2708
HCPSWU2830I VSWITCH SYSTEM VSWITCH1 status is ready.
HCPSWU2830I DTCVSW2 is VSWITCH controller for device 1E0
Thanks for the help, I really appreciate it.
I have the new OSA rdev added to vswitch1, not a hiccup (altho the old on
e
is still the primary, apparently)
VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 1Maxconn: INFINITE
PERSISTENT RESTRICTEDNONROUTER Accounting:
On 3/7/11 8:04 AM, "Steve Harman" wrote:
>Did you mean the SET VSWITCH command to change the rdev? I don't see a
>
>MODIFY VSWITCH command in the book, but I'm not so good at finding the
>
>right commands.
Yeah, sorry. SET VSWITCH. I always have to look that stuff up too.
>Seems like I still
Did you mean the SET VSWITCH command to change the rdev? I don't see a
MODIFY VSWITCH command in the book, but I'm not so good at finding the
right commands.
SET VSWITCH VSWITCH1 RDEV 2708 1E08
Assuming the results are what I want, then
SET VSWITCH VSWITCH1 RDEV 2708
to remove the old OSA
On 3/3/11 4:23 PM, "Steve Harman" wrote:
>We recently added two 10Gb OSA cards to our Z9 to replace our old 1Gb
>cards. I'm trying to figure out how to convert from the old cards to the
>
>new (zVM 5.4), while having an easy backout method.
Add the new RDEVs to the VSWITCHes using MODIFY VSWITCH
We recently added two 10Gb OSA cards to our Z9 to replace our old 1Gb
cards. I'm trying to figure out how to convert from the old cards to the
new (zVM 5.4), while having an easy backout method.
SYSTEM CONFIG has these statements
DEFINE VSWITCH VSWITCH1 RDEV 1E08 CONN CONTROLLER *
DEFINE VSW
