Finally I can close this problem.
PC is back in data center and connected to the ICC.
Still don't know what was the root cause. I guess alls well that ends well.
Since a rework of the pc fixed the problem I guess it's safe to say
that it was the culprit although there was absolutely no evidence to
PROTECTED]
On
Behalf Of James M
Sent: Friday, September 14, 2007 8:45 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.2 ICC console connection problems
Finally I can close this problem.
PC is back in data center and connected to the ICC.
Still don't know what was the root cause. I guess
On Wednesday, 09/12/2007 at 01:33 EDT, James M [EMAIL PROTECTED] wrote:
sorry...I hit submit by accident.
The trace does not point out any obvious clues.
I see the initial three way handshake
then I see the icc port send a do tn3270e command
the pc sends an ack
the icc sends back fin
I'm
I may have the issue resolved.
I reinstalled the os (win2k) emulator (hummingbird).
I can now connect to the icc port. But I didn't get all the way in
because the LU is in use.
When I go back to the mainframe location tomorrow I will know for sure.
It's very troubling not knowing what broke
Jim, I have always had good luck using IBM's Personal Communications
TN3270 (PCOMM) emulator. The current version is, I believe, 5.8, at
least for Windows XP
James M wrote:
I may have the issue resolved.
I reinstalled the os (win2k) emulator (hummingbird).
I can now connect to the icc port.
PROTECTED] On
Behalf Of Dave Jones
Sent: Thursday, September 13, 2007 12:36 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.2 ICC console connection problems
Jim, I have always had good luck using IBM's Personal Communications
TN3270 (PCOMM) emulator. The current version is, I believe, 5.8
I have had good results with X3270 on Debian Etch. We use it on all of our
consoles.
James M wrote:
It's very troubling not knowing what broke especially considering it's
our mainframe console.
I'm now wondering if there are certain emulators that are better than
others. Does IBM
On Thursday, 09/13/2007 at 12:41 EDT, James M [EMAIL PROTECTED] wrote:
I'm now wondering if there are certain emulators that are better than
others. Does IBM support/recommend certain emulators?
Here I am blaming the emulator - maybe I should be considering a linux
based icc console.
IBM
I tried rebooting. Mystery remains unsolved.
I'm bringing the pc back to the home office. I will re-install windows
tn3270 emulator. I will be back at mainframe site on friday to test
it. Although there is no evidence indicating something is wrong with
the pc it is the main suspect at this
On Wednesday, 09/12/2007 at 12:13 EDT, James M [EMAIL PROTECTED] wrote:
I tried rebooting. Mystery remains unsolved.
I'm bringing the pc back to the home office. I will re-install windows
tn3270 emulator. I will be back at mainframe site on friday to test
it. Although there is no evidence
I have a wireshark pcap file.
On 9/12/07, Alan Altmark [EMAIL PROTECTED] wrote:
On Wednesday, 09/12/2007 at 12:13 EDT, James M [EMAIL PROTECTED] wrote:
I tried rebooting. Mystery remains unsolved.
I'm bringing the pc back to the home office. I will re-install windows
tn3270 emulator. I
sorry...I hit submit by accident.
The trace does not point out any obvious clues.
I see the initial three way handshake
then I see the icc port send a do tn3270e command
the pc sends an ack
the icc sends back fin
I'm not enough of an ip guru to diagnose exactly why that happened or
for that
Hello Everyone,
Is it possible that the PC that can not connect can be rebooted?
(It what you do with a PC).
In the TN3270 you may have LU or PORT name that is being kept in
memory for that connection, so you can not start another one until that
LU/PORT in memory has been
Over the weekend an operator I did something..I don't know what that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary off/on path to cuu and dropping the
session from the HMC ICC utilities menu all to no avail.
Can someone please suggest other possible solutions. Thanks
from the hmc try resetting the OSA port at the chpid level.
David
From: The IBM z/VM Operating System on behalf of James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend
What does a query to the device show?
James M wrote:
Over the weekend an operator I did something..I don't know what that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary off/on path to cuu and dropping the
session from the HMC ICC utilities menu all to no avail.
Can
@LISTSERV.UARK.EDU
Subject: z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't know what that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary off/on path to cuu and dropping the
session from the HMC ICC utilities menu all to no avail
From: The IBM z/VM Operating System on behalf of James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't know what that
has rendered the ICC vm console
Operating System on behalf of James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't know what that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary
On Monday, 09/10/2007 at 11:16 EDT, James M [EMAIL PROTECTED] wrote:
device shows enabled.
I cannot reset the port on the hmc since it's a dual port card (icc
tcpip) and that would mean dropping many vm os telnet clients.
Don't worry, you can't reset the entire card (feature). Each port has
: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't know what that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary off/on path to cuu
at the chpid level.
David
From: The IBM z/VM Operating System on behalf of James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did
From: The IBM z/VM Operating System on behalf of James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't know what
@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't know what
that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary off/on path to cuu and dropping
On Monday, 09/10/2007 at 12:05 EDT, James M [EMAIL PROTECTED] wrote:
maybe we're getting someplace.
are you suggesting that I have to config path off in all the lpars and
then config it on in all?
what I did was off/on in lpar 1 - off/on lpar2 and so on.
off lpar 1
off lpar 2
:
off last lpar
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't know what
that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary off/on path
can you ping the ICC IP address from the PC?
I would check the PC TN 3270 target address?
Eric
The information contained in this communication is intended
only for the use of the recipient(s) named above. It may
contain
Technical Support
[EMAIL PROTECTED]
(319)-355-7824
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of James M
Sent: Monday, September 10, 2007 11:32 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.2 ICC console connection problems
OK thanks
: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't know
what
that
has rendered the ICC vm console unusable.
I tried disable/enable cuu, vary off/on path to cuu and
dropping
the
session from
__ __
From: The IBM z/VM Operating System on behalf of James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
Over the weekend an operator I did something..I don't
know
what
that
has rendered the ICC vm
level.
David
__ __
From: The IBM z/VM Operating System on behalf of James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection problems
__ __
From: The IBM z/VM Operating System on behalf of
James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console connection
problems
level.
David
__ __
From: The IBM z/VM Operating System on behalf of
James M
Sent: Mon 9/10/2007 10:47 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] z/VM 5.2 ICC console
James
Since the challenge started when the Operator did something I would tend to
think the error lies on the PC acting as the console and not with the OSA ICC
acting..
Look at the VM OPERATOR console at the time of the failure and see if the
operator typed something on the console..
Did
I checked the tn3270 profile - it looks fine and the operator log is
unavailable.
On 9/10/07, Eric Schadow [EMAIL PROTECTED] wrote:
James
Since the challenge started when the Operator did something I would tend to
think the error lies on the PC acting as the console and not with the OSA ICC
Is this PC multi-homed? Does your ICC Intranet have a connection to your
regular Intranet?
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of James M
Sent: September 10, 2007 14:21
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.2 ICC console
... you're having a fun day ... only a few hours left in prime shift ...
David
-Original Message-
From: The IBM z/VM Operating System on behalf of James M
Sent: Mon 9/10/2007 2:51 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] z/VM 5.2 ICC console connection problems
I checked
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.2 ICC console connection problems
I get various results
sometimes I get no error
sometimes I get unable to connect to host
some times unable to find host/gateway
I have another backup pc that is able to connect to the ICC
...and on the pc
:[EMAIL PROTECTED] On
Behalf Of James M
Sent: September 10, 2007 15:24
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.2 ICC console connection problems
the icc is on the same subnet as the bad pc.
I will scream if this turns out to be a windows problem
here's a trace of two seperate tn3270 icc
-Original Message-
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of James M
Sent: September 10, 2007 15:24
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: z/VM 5.2 ICC console connection problems
the icc is on the same subnet as the bad pc.
I will scream
On Monday, 09/10/2007 at 03:30 EDT, James M [EMAIL PROTECTED] wrote:
I'm particularly interested in WSA Rc 10053
http://www.sockets.com/err_lst1.htm#WSAECONNABORTED indicates your *PC*
terminated the connection, presumably because TCP (not the application!)
didn't like the data it received. A
42 matches
Mail list logo