On Thu, 10 Mar 2005, kevin thayer wrote:
> > Maybe :-) Does that mean using the gmane gateway
> > would be ok if "someone" would handle the
> > configuration (since it does munge
> > addresses, and does it in an, imho, intelligent way:
> > http://www.gmane.org/tmda.php) ?
>
> I'd be fine with
It takes some time. Isaac or someone else needs to approve it and then apply
it which can take a few weeks sometimes.
John
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:ivtv-devel-
> [EMAIL PROTECTED] On Behalf Of Michael Papazoglou
> Sent: 11 March 2005 01:08
> To: ivtv-devel@li
Hi Gregory,
No, I don't think it's supported yet. I added a note to that effect.
Thanks for keeping me honest there. But I'm sure there will come a day
when it does.
best,
Brian
---
SF email is sponsored by - The IT Product Guide
Read honest &
On Mar 10, 2005, at 5:44 PM, Jarod Wilson wrote:
Attached is a full patch containing all prior tveeprom and tuner
updates that
aren't yet in ivtv (as of 0.3.2i), along with a tveeprom addition for
the idx
55 PVR-150.
But don't use it for idx 55. Tuner it'll auto-load isn't correct,
according to
Hi Jarod,
Just tested 0.3.2i with your patch. With no audiofmt parameter to
cx25840 I'm still getting A2-BG audio detected incorrectly, not
NICAM-BG. With the audiofmt=0x09, I get only a very quiet static hiss.
Regards,
Stephen.
On Thu, 2005-03-10 at 17:44 -0800, Jarod Wilson wrote:
> Attached i
Hi,
Thanks... I had also tried 0.3.2i... with modprobe.conf as:
options cx25840 no_black_magic=1
or
options cx25840 no_black_magic=1 audiofmt=1
Neither help... My guess is just those lines are not good enough:
CX25840_TAG('S','a','m','p','l','e',' ','r','a','t','e')
CX25840_SET_CH_SEL
I have a similar blog up..
http://gentoomythtv.blogspot.com/
In it, I have documentent all the problems I have had in the gentoo +
mythtv + ivtv install process. I hope that it will be able to help new
installers.
/Fredrik
On Thu, 10 Mar 2005 21:09:33 -0500, Brian Topping <[EMAIL PROTECTED]>
On Thu, 2005-03-10 at 11:20 -0800, Jarod Wilson wrote:
> On Thursday 10 March 2005 02:11, Nipper wrote:
> > I had a go with 0.3.2h + morepalupdates-032h, but still no luck with my
> > audio. The picture was okay, tho reception wan't perfect.
> >
> > The audio is still being detected as Mono A2-BG,
Actually the end goal is to not have the ivtv tveeprom driver at all.
Does this actually fix something until then? or is it more for
completeness.
--Brian
On Thu, 2005-03-10 at 01:41 -0800, Jeremy Huddleston wrote:
> The attatched patch (not sure if the list prefers inline or attatched,
> so sorr
I did a quick check of the list and didn't come up with anything, so I
apologize if this has been dealt with.
I have an ntsc pvr-250. I'm running ivtv-0.2.0-rc2f from the gentoo
ebuild. I know this isn't the latest version, but last time I
upgraded, it caused problems, so I went back. Anyway
Just curious, but you mention one reason for buying the pvr150 is that
it comes with an IR Blaster. Have you actually gotten it to work
correctly? Granted, I haven't put much effort into it, but last time I
tried to send a signal, I got an error that my IR device didn't support
it.
On Thu, 2005-
I wanted to share this as another point of reference for people building
myth boxes. It chronicles what I had to do in addition to Jarod's
definitive document on the subject and thought that it might be good for
the archives.
http://blogs.codehaus.org/people/topping/archives/001005_mythtv.htm
Attached is a full patch containing all prior tveeprom and tuner updates that
aren't yet in ivtv (as of 0.3.2i), along with a tveeprom addition for the idx
55 PVR-150.
--
Jarod Wilson
[EMAIL PROTECTED]
diff -BurN ivtv-0.3.2i/driver/ivtv-driver.c ivtv-0.3.2i-palup/driver/ivtv-driver.c
--- ivtv-0
On Sunday 27 February 2005 05:34, Laurent Haond wrote:
> Axel Thimm a écrit :
> >Hi,
> >
> >you can find the tuners' specs under
> >
> >http://dl.ivtvdriver.org/datasheets/tuners/
> >
> >Check the *-Amity2 subdirs.
> >
> >I'm trying to get the tuner specs for the PVR 500 as well.
> >
> >Is ther
Cool, does the patch show up immediately in CVS, or does it take
some time? I guess I should subscribe to the mythtv-dev mailing
list as well.
Thanks!
Mike
On Thu, 10 Mar 2005, John Harvey wrote:
> I have just sent a patch to the myth-dev mailing list to fix the issue of
> the black screen af
On Thursday 10 March 2005 16:09, Scott Carr wrote:
> >Capture log output between the ivtv start and stop markers
> >in /var/log/message, then ship it off to the list. We can help you much
> >better if you show some logs.
> > Â
>
> I sent the dmesg output with the first message I sent to the list. Â
Jarod Wilson wrote:
On Thursday 10 March 2005 14:22, Scott Carr wrote:
If you want to try taking video direct from the device, you need to
set up the card with ivtvctl -u 0x3000 -p 4. The '4' is channel 4,
the 0x3000 is modebits for something or other.
0x300
On Thu, 10 Mar 2005 18:49:35 +0100, Jaap Struyk <[EMAIL PROTECTED]> wrote:
> Hello,
>
> Yust for the record I'am running 0.3.2f with the tveeprom/tuner
> detection patches on 2.6.11-preempt-4Kstacks.
> I did 3 recordings the last 3 days where al 3 are not very good, channel
> tuning is good but it
On Thursday 10 March 2005 13:12, Peter Martens wrote:
> > [...]This definitely works for me:
> >
> > patch -p1 -d ivtv-0.3.2h < morepalupdates-032h.patch
> >
> > (Patch is in the same dir as the expanded ivtv-0.3.2h)
>
> I think I am getting crazy. Never had problems with applying patches,
> but th
On Thursday 10 March 2005 14:22, Scott Carr wrote:
> > If you want to try taking video direct from the device, you need to
> > set up the card with ivtvctl -u 0x3000 -p 4. The '4' is channel 4,
> > the 0x3000 is modebits for something or other.
>
> 0x3000 is setting the card up for NTSC I believe.
#(¤&%6
I meant to send this to the devel list. Otherwise I may not reach Rich
whose having the same problem...
Sorry for the mistake. Been a long week...
Question to the developers: what is the recommended option to debug the problem?
-- Forwarded message --
From: jerome lacost
Brian Topping wrote:
Scott,
If you want to try taking video direct from the device, you need to
set up the card with ivtvctl -u 0x3000 -p 4. The '4' is channel 4,
the 0x3000 is modebits for something or other.
0x3000 is setting the card up for NTSC I believe.
If you've got signal, you should get
Scott,
If you want to try taking video direct from the device, you need to set
up the card with ivtvctl -u 0x3000 -p 4. The '4' is channel 4, the
0x3000 is modebits for something or other.
If you've got signal, you should get some file.
With regard to the rest of your configuration, be sure tha
I have just sent a patch to the myth-dev mailing list to fix the issue of
the black screen after exiting EPG during live tv.
John
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:ivtv-devel-
> [EMAIL PROTECTED] On Behalf Of Sager, Jim
> Sent: 10 March 2005 18:46
> To: 'ivtv-devel@li
> How are you saving the patches to apply them? If you're cutting and pasting,
> it could be white-space getting converted to something other than what its
> supposed to be (i.e., tabs to spaces or vice versa). If you save the patch
> attachment, it should apply just fine. If you're already doing t
Scott Carr wrote:
I have been dealing with this for a little while, and I believe I am
at the end of my rope.
My specs:
Computer:Gentoo x86 (2.6.10r6) with ALSA
Card:PVR150 (lspci sees: iTVC16 [cx23416] MPEG-2
Encoder)
IVTV Software: 0.3.2h (no patches)
Countr
Hi all,
Does anyone know the status of the IR transmitter on the PVR-150? Does
lirc work with any of the Hauppauge IR transmitters?
Thanks,
Brian
---
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT
I have been dealing with this for a little while, and I believe I am at
the end of my rope.
My specs:
Computer:Gentoo x86 (2.6.10r6) with ALSA
Card:PVR150 (lspci sees: iTVC16 [cx23416] MPEG-2
Encoder)
IVTV Software: 0.3.2h (no patches)
Country Specs:US NTS
And while I am at it, this patch was also sent to the user list.
Those with a new PVR350 might want to try it.
Jerome
-- Forwarded message --
From: jerome lacoste <[EMAIL PROTECTED]>
Date: Wed, 9 Mar 2005 14:26:19 +0100
Subject: [patch] ivtvfwextract.pl
To: ivtv-users@lists.sour
On Thursday 10 March 2005 02:11, Nipper wrote:
> I had a go with 0.3.2h + morepalupdates-032h, but still no luck with my
> audio. The picture was okay, tho reception wan't perfect.
>
> The audio is still being detected as Mono A2-BG, when we use PAL BG
> Stereo NICAM.
>
> tveeprom: tuner = Philips
On Wednesday 09 March 2005 06:12, Goto Dengo wrote:
> I'm trying to use Jarod's guide to set up my PVR350 under FC3 - kernel
> 2.6.10-1.770_FC3smp. I get to the point where he suggests ensuring
> your video devices exist by running "ll /dev/video?". When I do, I
> get the error "ls: /dev/video?:
The black screen doesn't bother me much either, nor does the stuttering
becasue I just don't myth on live tv much, but I did want to report it
for completeness.
I too did not experience the stuttering with 0.1.10-pre2 series. I
think I upgraded to the 0.3 series during a recent upgrade to a 2.6
k
On Thursday 10 March 2005 02:55, Christian Viller Hansen wrote:
> On Thu, 10 Mar 2005, Rick Stewart wrote:
> > Hi there,
> >
> > I have been attempting to follow the helpful advice available to get my
> > TV card working with MythTV 0.17. So far I have had no success at all
> > getting any TV input
This has the following patches and fixes...
#0.3.2i - fixed sliced vbi on itvc16 chips.
- card type patch.
- DMA fixes to streamline code, improve some
errors.
- YUV Decoding fixes, more likely to work now I suspect,
things like no byteswapping, which is
John,
Mike, who started this thread, reported the problem with ivtv 0.2.
But, yes, I did try ivtv 0.2.? and did get the same result.
I also have some issue with mytmusic that seems similar except in that
case the cpu is pegged so I'm not sure it is the same issue. It seems
to work better with
John,
What's the fix for the programme guide? I hate to ask this in this list
where it's not applicable. If necessary, can you send it to me directly?
Thanks,
Jim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John Harvey
Sent: Thursday, March 10, 2005 9:3
Hello,
Yust for the record I'am running 0.3.2f with the tveeprom/tuner
detection patches on 2.6.11-preempt-4Kstacks.
I did 3 recordings the last 3 days where al 3 are not very good, channel
tuning is good but it looks like the encoder has some trouble, minor
"glitches" and "sparks" now and then in
I believe the version is 0.2.0 which i get from dmseg
ivtv: version 0.2.0 (rc3a) loading
ivtv: Linux version: 2.6.9-chw-4 SMP preempt 586 gcc-3.3
and when i go to run ivtvfbctl /dev/fb0 -prepdma
I get a failed to open device error, no such device.
As for the request to post revelant parts of the
John,
I see exactly the same problem. This is a pretty accurate description.
The black screen thing is just an annoyance.
I don't know if it is related but I also get a frontend hang when skipping
forward or backwards in a recording. This is infrequent but seems to happen
more on skip back. It a
> Maybe :-) Does that mean using the gmane gateway
> would be ok if "someone" would handle the
> configuration (since it does munge
> addresses, and does it in an, imho, intelligent way:
> http://www.gmane.org/tmda.php) ?
I'd be fine with it, but i want address obfuscation,
not encryption.. even
Hi Paul,
Apologies for not responding quicker - I'm only a casual observer of the
ivtv list!
I applied your patch.
I have the same trouble you were having ... I'm trying to get the decoder to
play the stream to the end, then go to a black frame. I added the
IVTV_IOC_S_STOP_DECODE ioctl to my co
>
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> alias tveeprom tveeprom-ivtv
> options cx25840 no_black_magic=1
>
Got it!!! That did it for me. Thank you very much Jarod.
---
SF email is sponsored by - The IT Product Guide
R
The stuttering occurs when I bring up the program guide and
then start moving around in it, but only sometimes. It seems
to be more likely to happen when I use page-up or page-down
than when I just use the up/down/left/right arrows. I would
say it happens to me between 1/3 to 1/2 of the times I
On March 9, 2005 04:33 pm, John Harvey wrote:
> Ok. Is /dev/video16 a device or just a file containing your mpeg data?
# ls -l /dev/video*
lrwxrwxrwx 1 root root 10 Mar 9 19:16 /dev/video0 -> v4l/video0
lrwxrwxrwx 1 root root 11 Mar 9 19:16 /dev/video16 -> v4l/video16
lrwxrwxrwx 1 root root 1
Unfortunately for you i have a fix for the programme
guide issue but not for the stuttering:) Anyway at
least one problem will be solved shortly
Can you describe it better for me.
Does it occur when the programme guide is
1) brought up
2) Is up but nothing is changing in the Program guide
3) When
I've tried this with ivtv 0.2 and 0.3 with the same results. Honestly,
the black screen after the EPG doesn't bother me much, I've just
trained myself to hit the info button to bring up the OSD ('I')
afterwards.
The stuttering is the real problem for me.
Note that I didn't see the stuttering at
Hi all,
Applied morepalupdates-032h.patch, recognition is OK, thanks very much for the
progress made.
I live in a PAL BG, The Netherlands, country and see that tuner fmt =
PAL(D/K), which might, or not, don't know, cause sometimes being sound not
there, or distorted. Further I do see that ther
On Thu, 10 Mar 2005, Rick Stewart wrote:
Hi there,
I have been attempting to follow the helpful advice available to get my TV
card working with MythTV 0.17. So far I have had no success at all getting
any TV input whatsoever. I have attempted to do a make install of the ivtv
driver version 0.3.2.h
Title: Hauppauge PVR-150MCE
Hi there,
I have been attempting to follow the helpful advice available to get my TV card working with MythTV 0.17. So far I have had no success at all getting any TV input whatsoever. I have attempted to do a make install of the ivtv driver version 0.3.2.h but r
On Wed, 2005-03-09 at 12:00 -0800, Jarod Wilson wrote:
> On Wednesday 09 March 2005 11:32, Jasper van der Neut wrote:
> [...]
> > > It looks like there are two different LG TAPE tuners used on PAL PVR-150
> > > cards, because the current def seems to work perfectly for folks with
> > > tuner idx=97
Hi Folks
I've been playing with libzbvi and the ivtv drivers. I found this does
not work straight off. The zbvi code asks the driver what its
capabilities are.
./capture --pal -v
[,..]
Querying current vbi parameters... success
VBI capture parameters supported: format 59455247 [GREY], 2700 H
On Mon, Mar 07, 2005 at 07:18:19PM +0100, Francesco wrote:
> I recently bought a PVR-150 PAL. Tuner and composite input work
> apparently without problems with 0.3.2f.
> Since I don't have an antenna plugged to the card and I planned to buy
> one, I need to know if the FM tuner/audio is currently s
The attatched patch (not sure if the list prefers inline or attatched,
so sorry if you prefer inline) updates the tveeprom.c provided in ivtv
to be a little more compatible with the one included in 2.6.11. Other
modules (such as bttv) require symbols exported by the kernel's module
that aren't pro
If you can't succesfully modprobe ivtv-fb then you
won't be able to run X until that is sorted.
What version of ivtv are you using?
Post the relevant part of the messages file for the
modprobe and we might be able to work out what is
wrong there.
Prior to running X you can use
ivtvfbctl /dev/fb0
It works ! Thanks !
I have compiled my kernel with i2c and v4l not as
modules. from source 2.6.10-1.770.
I have a static image as my tuner doesn't seems to be
recognized... anyway, I'll search !
-- fred
--- Jaap Struyk <[EMAIL PROTECTED]> wrote:
> Op di 08-03-2005, om 20:02 schreef Tyler Traff
On Thu, 10 Mar 2005, Peter Martens wrote:
Probably just my stupidity, but I really cannot apply those patches
from you, Jarod. I always get rejections on those. Something special
needed to apply those (I am using -p0)? Thanks for all the nice work.
Peter
I used this patch and I got rejections at f
small typo the error is that it can't find /dev/fb0 and i've also
tried 0-3 with no luck thanks
On Thu, 10 Mar 2005 03:20:19 -0500, Ryan Kremser <[EMAIL PROTECTED]> wrote:
> Hello I can't start x with my pvr 350. I'm' using knoppmyth and i can
> get the tv out working using the command
> d
Hello I can't start x with my pvr 350. I'm' using knoppmyth and i can
get the tv out working using the command
dd if=/dev/video0 of=/dev/video16 bs=128k
I have also configured my config-x file which i've included below. I
keep getting a strange error staying that x failed to open because
/de
Have you tried ivtv 0.2. The behavior of the frame buffer/X is slightly
different that could possibly have an effect on this and it would be
interesting to know if it makes a difference.
John
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:ivtv-devel-
> [EMAIL PROTECTED] On Behalf
On Wednesday 09 March 2005 23:55, Jasper van der Neut wrote:
> > Please give the attached a try instead. Its against 0.3.2h, and includes
> > all my tuner and tveeprom changes for all three PAL PVR-150/500 variants.
> > The tuner def your patch modifies is the idx 97 tuner, so it shouldn't be
> > m
On Wednesday 09 March 2005 23:02, Loc Ho wrote:
> Hi,
>
> I tried version 0.3.2h. Tuner works but no audio. I tried audiofmt=1 in
> modconfig and set it to 1 explicitly in cx25840-driver.c. Both failed
> with no audio. Any hint? 0.3.2e works just fine.
What options have you used when loading ivtv
On Wed, 9 Mar 2005, kevin thayer wrote:
> i thought john's post was quite clear:
>
> he doesn't have the cycles to make sure gmane is
> configured correctly. (and now, since i am the list
> admin, i don't either :)
>
> In order to protect the inboxes of those posting, we
> won't allow ga
Been waiting ~9 mounth for this, please stop our s/uff/ering :)
/Fredrik
2005-03-10 09:44 skrev John Harvey <[EMAIL PROTECTED]>
>I have a patch for the blank screen when closing EPG which I will try to
>finish tonight.
>
>John
>
>
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto
63 matches
Mail list logo
