Charlie,
what L2 load balancing hashing is done on the EX 4200 series?
There is no forwarding-options hash-key configuration statement.
I have two interfaces, ae0 and ae1 that run BGP in a 2 member VC stack.
Behind the VC stack is a row of PCs with their own LAG aeX's.
Will ae0 and
Dear All,
Today i configured '*mirror-flash-on-disk*' on 2 M320 routers
and i rebooted the routing engines in order for the configuration to take
effect. But it didnt take effect.
But when i did the same thing in the MX routers it worked fine.
JUNOS: 9.5R3.7
Is there any known
On Wed, Aug 18, 2010 at 11:11:35AM +0200, Felix Schueren
felix.schue...@hosteurope.de wrote:
I don't quite understand your config. You have different BGP neighbours
on ae0 and ae1 in a virtual chassis, that is, you have layer3
connections on these interfaces? Please elaborate, maybe add a
Ross,
As aware, in the MX DPC there is a chip called the IChip (this is where all the
data forwarding take place). Earlier there were some cases where IChip was
dropping
the packets. To recover the chip from the 'wedge' state Juniper implemented a
self-healing mechanism as a response to PR
Dear Folks,
I am running various IPSEC VPN tunnels on SRX, but seeing a strange behavior
with 1 or 2 tunnels suddenly, that is the tunnel remains up, but traffic
stops passing.
has any one experienced this ever?? please share
regards,
Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global
Muhammad,
When asking for help it would be worth while to give as much information as
possible. What type of tunnel? What is the far end of the VPN? What code
version? Have to searched the PR's for this type of issue?
I will say if it's pre 10.0 I have seen *lots* of ipsec issues and behaviors
I'm trying to enable flow accounting on one of our M7is. JunOS
version is 9.1R8. No matter what I do, I can't get a flow to export.
I'd appreciate any input to obvious errors, or tips on other things to
try. I've also tried removing sampling from the interface and doing
it with a
-Original Message-
From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
boun...@puck.nether.net] On Behalf Of Andy M.
Sent: Wednesday, August 18, 2010 11:43 AM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Flow accounting on an M7i
I'm trying to enable flow accounting
I do, I meant to include that.
a...@er01 show ntp status
status=0644 leap_none, sync_ntp, 4 events, event_peer/strat_chg,
version=ntpd 4.2.0-a Fri Apr 25 07:34:52 UTC 2008 (1),
processor=i386, system=JUNOS9.1R1.8, leap=00, stratum=2,
precision=-19, rootdelay=46.515, rootdispersion=14.961,
On Wed, Aug 18, 2010 at 12:06 AM, Bjørn Tore b...@paulen.net wrote:
You'll find it under
jnxOperatingBuffer, 1.3.6.1.4.1.2636.3.1.13.1.11
And you can find which index to use under that tree (in case you want
to monitor PICs or multiple RE's) by examining the contents of
jnxOperatingDescr (
I'm trying to enable flow accounting on one of our M7is. JunOS
version is 9.1R8. No matter what I do, I can't get a flow to export.
I'd appreciate any input to obvious errors, or tips on other things to
try. I've also tried removing sampling from the interface and doing
it with a
Did you set the services for the card under the chassis section..
fpc 1 {
pic 2 {
adaptive-services {
service-package layer-3;
}
}
On Wed, Aug 18, 2010 at 12:32 PM, Andy M. a...@ctdam.com wrote:
I do, I meant to include that.
a...@er01 show ntp status
I tried both layer-3 and layer-2-3 with no effect.
I also manually took the PIC offline and brought it back up.
-Andy
On Aug 18, 2010, at 2:49 PM, Nathan Sipes wrote:
Did you set the services for the card under the chassis section..
fpc 1 {
pic 2 {
adaptive-services {
Its SRX3600 running in cluster, with Junos version 10.0R3.10 (recommended
one), route based VPN tunnel, remote end device is SSG140
Thanks and regards,
Muhammad Fahad Khan
JNCIP - M/T # 834
IT Specialist
Global Technology Services, IBM
fa...@pk.ibm.com
+92-301-8247638
Skype: fahad-ibm
Is there any logical unit created under sp- interface? You seem to have defined
only physical interface without any logical unit to go with under
forwarding-output.
-Original Message-
From: Andy M. [a...@ctdam.com]
Received: 18/08/2010 12:40
To: Nathan Sipes [nathan.si...@gmail.com]
I've seen it with monitoring and st interfaces inside vrs - routing instances
that is.
Will O'Brien
On Aug 18, 2010, at 10:35 AM, Fahad Khan fahad.k...@gmail.com wrote:
Dear Folks,
I am running various IPSEC VPN tunnels on SRX, but seeing a strange behavior
with 1 or 2 tunnels suddenly,
Starting JUNOS a requirement for cflowd to work is to configure NTP as
Stefan pointed out a few emails earlier.
--- On Wed, 8/18/10, sth...@nethelp.no sth...@nethelp.no wrote:
From: sth...@nethelp.no sth...@nethelp.no
Subject: Re: [j-nsp] Flow accounting on an M7i
To: a...@ctdam.com
Cc:
17 matches
Mail list logo