And the change now announced on 15.1 (new release) using freebsd 10 will not
help to solve it ?
> On Oct 8, 2015, at 12:33, Colton Conor wrote:
>
> Saku,
>
> You seem to be very familiar with the major routing vendors implementations
> on SMP. Do you consider the lack
Yes for sure. We use it like this !!!
You need only to break the virtual chassis initial configuration
> request virtual chassis vc-port delete ...
Dont forget that juniper only will support qsfp+ to 10km
Att
Giuliano Cardozo Medalha
WZTECH NETWORKS
ADVANCED SERVICES
giuli...@wztech.com.br
Request virtual-chassis recycle and renumber you can put the switch as a master
stand alone
Sent from my iPhone
On Aug 13, 2015, at 22:23, Scott Granados sc...@granados-llc.net wrote:
Hi,
Have some EX 4300s that I want to break apart and start like they were
factory new and reboot. I
Have you tried to remove the vc-ports ?
Sent from my iPhone
On Aug 13, 2015, at 23:19, Scott Granados sc...@granados-llc.net wrote:
I tried this one and it errors out because the node was active.
Thanks
Scott
On Aug 13, 2015, at 9:34 PM, Giuliano (WZTECH) giuli...@wztech.com.br
I think the better option is to use ACX5048
Same qfx hardware with a different software
It will support vpls and evpn
But I think you will need license for 10G interfaces and L3vpn
Sent from my iPhone
On Jun 4, 2015, at 10:38, Tim Jackson jackson@gmail.com wrote:
It should support
13.3R5 or 14.1R4 are better options
Sent from my iPhone
On Mar 20, 2015, at 14:09, Tan Heng Chai ad...@sg.gs wrote:
Hi J-NSP,
Just wondering if anyone has benchmark/feedback on BGP convergence
times on the MX80 with and without sampling on versions higher than 11.4R7.5,
if there was a a solution
that can be accomplished without having to use a loop-cable?
Thank you,
Levi Pederson
Mankato Networks LLC
cell | 612.481.0769
work | 612.787.7392
levipeder...@mankatonetworks.net
On Fri, Mar 6, 2015 at 2:57 PM, Giuliano (WZTECH) giuli...@wztech.com.br
wrote:
We
We have a situation here and we find a way ... We connect 2 interfaces in a
optical cable loop ... One that came from a trunk interface ... Family
ethernet-switching and other family mpls with L2-circuit to do a vlan traffic
to enter in a mpls interface
Sent from my iPhone
On Mar 6, 2015, at
Chris
The best option is to disable the feature ?
And about to configure it ?
If you have a protect-re firewall filter applied in loopback ... Can this be
done ?
Is it safe ?
Some documents from juniper showing the best way ?
And about to disable the process ?
Thanks a lot
Sent from my
Hi,
We have an MX80-5 router with 108 BGP sessions.
All the BGP sessions for less than few routes.
Only 2 BGP is full routing.
We are running 12.2R2 version ... of JUNOS Software.
After a reboot this morning putting the box in the following mode:
set chassis network-services enhanced-ip
Hi,
Does anyone has some experience using SRX240 for VPLS Backbone ?
How much clients and mac address it scale ? Is it simple to configure ?
How much bandwidth is possible to pass ... considering a rectangular
topology (4 points).
Thanks a lot,
Giuliano
People,
Some topics where questioned today about how to limit traffic for vlan
subscribers using MX5 routers.
The main question is related to system architecture related to the main
gear (internal machine) to control and limiting packets.
Using policers (input or output) or shaping-rate we
People,
Dow anyone on list is using MX series as a BRAS box ?
We are looking forward some samples of configurations to apply shapping
rate using only radius variables.
We have found the configuration bellow ... but we did not find any
RADIUS dictionary to apply it.
The only way we found
Phill,
Could ou please share some juniper links or configurations on how about
to configure SRX boxes with MPLS in a RING topology ?
Are you using L3 MPLS VPN or L2 VPLS or EoMPLS ?
Is it possible to share some configurations or links ?
Thanks a lot,
Giuliano
On 15/08/12 15:29, Johan
Hi everyone,
Does anyone know how to restart a JUNOS process using Shell and CRONTAB ?
Do we need to create some kind of shell script to do that ?
This seems not to be working for me:
ps -ax | grep dfwd
1146 ?? I 0:00.27 /usr/sbin/dfwd -N
kill -s HUP 1146
Does anyone uses the CRONTAB
Looks like is better to use event-options:
set event-options generate-event TestEvent time-of-day 09:05:00 -0300
set event-options policy Policy1 events TestEvent
set event-options policy Policy1 then execute-commands commands run
restart firewall
set event-options policy Policy1 then
People,
Besides the use of groups feature on JUNOS, how can name a static route ?
IOS has an option 'name' for static routes ... how can we do the same
thing in junos ?
Is it possible ?
There is some kind of description ?
Thanks a lot,
Giuliano
Hi,
We are trying to configure JUNIPER M-Series with dhcp-local-server
without any good results.
Basically we are configuring: set system services dhcp-local-server and
set access address-assignment
It is not working and the router is dropping the DHCP Requests ...
Does anyone has some
People,
Does anyone knows if SRX650 box supports dual SRE6 (Services and Routing
Engine 6) ?
It is possible with JUNOS 11.4 (last version available) to use both
routing engines ?
Any special configuration to do ... for this both SRE6 to work ?
We have tried dual SRE6 ... but what happen
You can use a firewall filter to avoid or to permit the correct ip
address to your gear.
There is a good document at Juniper web site explaining how you can do
that (best practices) ... beside others:
http://www.cymru.com/gillsr/documents/junos-template.pdf
People,
Does anyone knows about how much advances licenses are necessary for a
EX8208 chassis
configured with 2 Routing Engines ?
EX8208-AFL EX8208 Advanced Feature License
It will be necessary 1 or 2 licenses ?
Theses licenses are available for chassis or for RE ?
If we use OSPFv3 ...
21 matches
Mail list logo