KR> Cowl hinge

I should have mentioned that I want to attach the hinge without the use of rivets on the top cowl. I have located a few web sites that show how to attach the hinge with rivets, but I have a clear coat carbon fiber top cowl that I don't want to see rivets on. I think I can just glass in the

KR> Astrovan main gear legs

Bob, They are 26 inches, I just cut the bar in half. No I have not flown it yet. I did not test them, but I felt they would be plenty strong. If they can hold the weight of a KR2 in a horizontal position. I would think they could hold even more at a 45 degree angle. You can also gain more

KR> Dan F. question

I'm not familiar with how to do this. Is there any way we can ALL sign and send him An Electronic get well card with all of us on the card? Sorta like passing on around at work? Glenn Martin Owner Martek Mississippi 13238 Hudson-Krohn Rd Biloxi, MS, 39532 rep...@martekmississippi.com

KR> Bad News: N4DD Down at MVN

Very sorry to hear that. That does not sound good... Hope things get better. Jeff On 9/17/09, David Mullins wrote: > > Latest on Dan: > > He was transported from the local Mt Vernon hospital to one in St. Louis. > > Dave > > > > David Mullins wrote: >> Just a short note

KR> Bad News: N4DD Down at MVN

I'm sure most of the KRNet will agree, he'll be in our thoughts & prayers. Hoping for a speedy recovery. LGM -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of David Mullins Sent: Thursday, September 17, 2009 5:06 PM To: KRnet Subject: KR>

KR> Gathering / Performance Eval

The plane is gassed up and the bag is packed. Leaving Waupaca WI in the morning. Hope to be there before noon. See you there! Jeff Lange Sonerai 1463J

KR> VW oil viscosity

Phil, I am going to go with the recommendation forwarded on from Joe Horvath at Revmaster, and that is to use 10 W 50. I am also using Valvoline, but don't really know why I chose that one. I do not have a problem with overheating, in fact, I have the opposite, on the Oil temp. I will let you

KR> Bad News: N4DD Down at MVN

Latest on Dan: He was transported from the local Mt Vernon hospital to one in St. Louis. Dave David Mullins wrote: > Just a short note that N4DD crashed on landing today at Mt. Vernon. > Dan Freeman has some good cuts and scrapes on his head, arms and > feet, but should pull through. He is

KR> Bad News: N4DD Dan F. and trip to KMVN

Dan, we are all praying for you and your recovery.   Sorry to hear about your bird but your health and life are so much more valuable to us.   Keep your spirit up and get well.  N41768 and I wont be making it to KMVN this year due to bad weather on this end and requirement that I be here on 

KR> Bad News: N4DD Down at MVN

I am glad to hear that Dan is still amongst us. God speed your recovery Dan! -- Glenn Martin KR2 N1333A Martek Mississippi 13238 Hudson-Krohn Rd Biloxi, MS, 39532 rep...@martekmississippi.com

KR> Bad News: N4DD Down at MVN

Sorry to hear, Give Dan our my best wishes and hope he gets out of hospital before you guys drink all the beverages. -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of David Mullins Sent: Friday, 18 September 2009 8:06 AM To: KRnet Subject:

KR> Bad News: N4DD Down at MVN

Just a short note that N4DD crashed on landing today at Mt. Vernon. Dan Freeman has some good cuts and scrapes on his head, arms and feet, but should pull through. He is currently at a local hospital being treated for his injuries. I almost had the crash in pictures as I was walking out of the

KR> Astrovan main gear legs

Mike, I bought and tested some astro van legs a couple of years back, and found them too flexible to hold the weight of a Kr2 and a safety factor of 1.5. Being shy of prop strike, I shelved the astro van legs and went another direction. A couple of questions- how long are your gear legs, and

KR> VW oil viscosity

VW Engines Aust, who also race there engines, only want me to use 40 grade Valvoline. They it removes heat better. Here is interesting oils on oil. http://www.valvoline.com.au/pdf/Essential%20Guide%20to%20Motor%20Oil%20Brochure%20FINAL.pdf Phil Matheson SAAA Ch. 20 http://www.saaa20.org/

KR> Astrovan main gear legs

Marlyn, I used the spring bar from the old retract system, cut it into and attached them to the landing gear brackets which I also built out of 4130, 1/8" . I put two small webs, just to add a little strength and made some holes to save weight. I epoxyed foam on the front and back of the

KR> VW oil viscosity

Almost all the new cars use 5w30 as there oil, the tighter tolerance with advanced machining has made that possible. They use it because of less friction, greater fuel economy and more horsepower. Fred Johnson Reno, NV Phil Wrote: i tried 15/40 and it actually gave me more revs at take off so

KR> VW oil viscosity

i tried 15/40 and it actually gave me more revs at take off so much so i thought about more pitch onn the prop however when hot i did not like the oil pressure i like to see 10psi / 1000 rpm so went back to 20/50 interesting though more power on thinner oil phill

KR> iPilot Aviation Weather Mount Vernon, Illinois Forecast

http://www.ipilot.com/weather/index.php?pands=mvn=39=8

KR> KR Sterba prop and rain

Dan Heath wrote: > I have a Sterba KR prop on my KR and it has the leading edge protection. I > may encounter light rain, the kind where the visibility is still very > good, but some rain. How much rain can the prop take, for how long, and is > there a recommended VNE in RPM, for the prop in

KR> KR Sterba prop and rain

I have a Sterba KR prop on my KR and it has the leading edge protection. I may encounter light rain, the kind where the visibility is still very good, but some rain. How much rain can the prop take, for how long, and is there a recommended VNE in RPM, for the prop in this weather condition, or

KR> Cowl hinge

Netters, Is there a good web site to show the process on installing colw hinges? I have a new cowl and need to see the process. Mark L does a good job with his colw but no photos of adding the hinge and the pin. Lee Van Dyke PS Everybody have a great time at the Gathering.