I've been at this point before and did get some help. I've got stuck at this
point again. I'm in search of an workable elegant solution.
When I started with leaf, I wanted to install it on a hard disk. When I used
syslinux dos version, I got an error saying cannot get exclusive access. I
was told
What syslinux version have you tried?
I had only success with version 2.00-pre6 (at the time)
Version 2.00 has just come out, give it a try and test it!
What is the exact error given by syslinux?
-Original Message-
From: S Mohan [mailto:smohan@;vsnl.com]
Sent: Tuesday, November 05, 2002
Mohan
At 10:15 05.11.2002, you wrote:
.
I also tried Ranish Partition Manager to format the CF card in FAT12 mode.
Still syslinux gave the same error. Syslinux unix version executed under
leaf gives a grsec and segmentation fault.
I ran into this myself when I was building/testing the write
Addendum to my post. I downloaded syslinux.lrp and mkdosfs.lrp from
monkeynoodle.org. I copied them to my hard disk (/dev/hda1), did lrpkg -i
syslinux and lrpkg -i mkdosfs. Both got installed into memory.
I then gave syslinux /dev/hdc. Syslinux aborted saying sector sizes should
be 512 and fs does
Latest syslinux 2.00 stable version from freshmeat. Are the programs that
will just copy boot sectors or create boot sectors for /dev/hda1, /dev/hda2
etc.. that I can simply copy with a dd command?
Mohan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:leaf-user-admin@;lists.sourceforge
No, you run syslinux to create the boot sector ON the CF.
Read the docs.
-Original Message-
From: S Mohan [mailto:smohan@;vsnl.com]
Sent: Tuesday, November 05, 2002 9:59 AM
To: Luis.F.Correia; [EMAIL PROTECTED]
Subject: RE: [leaf-user] (no subject)
Latest syslinux 2.00 stable version f
I know that is the proper way. Unfortunately, I'm stuck and am mad at myself
for that.
Error message:
ERROR 440D: Unable to lock drive for exclusive access - when I use syslinux
2.00 from freshmeat. the last time, I used syslinux 1.75.
Mohan
-Original Message-
From: [EMAIL PROTECTED]
[m
You have replied to the wrong list :)
Btw,
Do this, boot with a dos floppy having only the flash as hda1.
after booting dos, run syslinux -s c:
(you need to get syslinux compiled for dos :)
-Original Message-
From: S Mohan [mailto:smohan@;vsnl.com]
Sent: Tuesday, November 05, 2002 10:4
I downloaded DOS6.22 image from putergeek.com. Used fdisk from that floppy
and format from that floppy. Still no luck.
If I execute fdisk under leaf (monkeynoodle.org) as fdisk/dev/hdc, and give
p for print partition table, I get the following:
Disk /dev/hdc: 16 heads, 32 sectors, 123 cylinders.
I'm home at last. I did a mixture of things. I downloaded DOS6.22 floppy
from putergeeks.com, extracted my old syslinux 1.75 (dos version) into the
same boot floppy and made my CF /dev/hda1 as suggested by Luis (Hail O
King - my saviour). Lo and behold it went thro' like a hot knife thro'
butter. s
If you get the 'Unable to lock drive for exclusive access' error when
running syslinux, you are NOT using DOS6.22.
Follow these exact instruction:
Hardware:
On PC with only a floppy drive and one CompactFlash IDE adapter configured
as /dev/hda or primarymaster IDE.
1) Then, boot from a Dos 6.22
Hello,
I'm thinking of setting up a bering box with samba.
Could you please tell me where I can find information on the (latest)
samba-lrp-Package ?
(which samba version is implemented, can I use swat,...)
Thanks!
Bye
Elmar
--
Elmar Gerw
Look here
http://leaf.sourceforge.net/devel/jnilo/packages/untested/
roberto
On Tue, Nov 05, 2002 at 02:03:52PM +0100, Elmar Gerwalin wrote:
> Hello,
> I'm thinking of setting up a bering box with samba.
>
> Could you please tell me where I can find information on the (latest)
> samba-lrp-Pa
Hi Erich,
* Erich Titl ([EMAIL PROTECTED]) [021105 01:48]:
[snip]
> I ran into this myself when I was building/testing the write protected DOM.
> I believe building a (for example) bering kernel without gresecurity could
> solve the issue. I am still in the process of defining a viable developme
Hi again Kim !!!
These are my htb rules:
I just replaced tc by run_tc
--
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 htb default 30
tc class add dev eth1 parent 1: classid 1:2 htb rate 5Mbit
tc class add dev eth1 parent 1:2 classid 1:10 htb rate 32Kbit
After reading your rules at a quick glance you seem to need the folowing
modules loaded.
cls_u32.o
Sch_htb.o
Sch_sfq.o
Sch_prio.o
Verify that they are loaded by issuing the lsmod command.
You might want to split up your tcstart
and insert an
echo ok
echo ok1
and so on in between the rules.
Th
On Tue, Nov 05, 2002 at 02:50:22PM +0100, [EMAIL PROTECTED] wrote:
> After reading your rules at a quick glance you seem to need the folowing
> modules loaded.
>
> cls_u32.o
> Sch_htb.o
> Sch_sfq.o
> Sch_prio.o
These modules must be writed in uppercase ??
roberto
>
> Verify that they a
On Tue, 05 Nov 2002 14:45:24 +0530 S Mohan wrote:
> Is mkfs.msdos available in leaf?
It is probably in other packages as well, but fdisk.lrp from
http://leaf.sf.net//devel/thc/files/kwarchive/fdisk.lrp
includes it. fdisk and syslinux 1.42 are also included.
--Brad
On Tue, 05 Nov 2002 11:05:56 -0300 Roberto Pereyra wrote:
> On Tue, Nov 05, 2002 at 02:50:22PM +0100, [EMAIL PROTECTED] wrote:
> > After reading your rules at a quick glance you seem to need the folowing
> > modules loaded.
> >
> > cls_u32.o
>
>
> > Sch_htb.o
> > Sch_sfq.o
> > Sch_prio.o
>
>
Thanks for the reply.
- Original Message -
From: "Ray Olszewski" <[EMAIL PROTECTED]>
> Does "seems to work fine" mean that these "two different PCs" are able to
> get DHCP leases from your ISP? Or do you have a lesser standard for "work
> fine"?
It means exactly what is says - that the t
At 04:02 PM 11/5/02 +, Dave Anderson wrote:
Thanks for the reply.
- Original Message -
From: "Ray Olszewski" <[EMAIL PROTECTED]>
> Does "seems to work fine" mean that these "two different PCs" are able to
> get DHCP leases from your ISP? Or do you have a lesser standard for "work
> f
Dahhh. I knew that, I knew that..
Lack of sleep definitily affects ones ability to reason ;-)
Thanks for the feedback. Works like a charm now.
Steve
> I think I remember a similar error. Are you sure your firewall will
> allow outgoing http connections from the firewall? I know in Berin
I don't know if you have tried this link:
http://chinese-watercolor.com/LRP/hd/lrpfile.html
but I followd his setup directions and have gotten a 16mb CF flash to work
w/o problem using Bering rc3.
---
This sf.net email is sponsored by: See t
Dear List:
I am interested in setting up a LEAF variant as a firewall and ECMP router.
I have two somewhat unreliable connections (one a cable service, one
DSL) and both offer straight ethernet from their respective modems. The
unreliability comes mostly from DNS fade or other provider problems,
I fought with this same issue all weekend trying to boot various versions of
LEAF from a CF card that is sitting in an IDE adaptor.
I found the best way to do it was to use DR-DOS and the latest syslinux.com.
I failed when I used the boot disk at http://chinese-watercolor.lrp (which
is a win98 dis
How do I change the root password in Bering?
---
This sf.net email is sponsored by: See the NEW Palm
Tungsten T handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0001en
--
Type "passwd" in the command prompt. (Follow the prompts. And be
sure to backup before you reboot.)
Hope this helps.
Troy
-Original Message-
From: Godfried Duodu [mailto:GDUODU@;dot.state.tx.us]
Sent: Tuesday, November 05, 2002 1:32 PM
To: [EMAIL
Backup the etc package.
> -Original Message-
> From: Troy Aden [mailto:Troy.Aden@;WaveCom.CA]
> Sent: Tuesday, November 05, 2002 2:35 PM
> To: 'Godfried Duodu'; [EMAIL PROTECTED]
> Subject: RE: [leaf-user] Root Password
>
>
> Type "passwd" in the command prompt. (Follow the prompts
Hi there,
Has any got Bearing to work with KPN's MxStream in the netherlands
MxStream uses a VPN type connection between the router and the modem,
A pptp connection is open between router and modem, in the following
manner
Pptp 10.0.0.138 pc1, that's the command "pc1" needs to be added after
the
Only test...
_
MSN Messenger: converse com os seus amigos online.
http://messenger.msn.com.br
---
This sf.net email is sponsored by: See the NEW Palm
Tungsten T handheld. Po
I try to contact Vladimir about that, but dont get any answer, and i have to
create a hotmail account to subscribe the list, cos my personal account
([EMAIL PROTECTED]) dont receive the confirmation msg from the
mailman of leaf lists. (Are denying any brazilian domains in sourceforge or
leaf??)
Reginald,
On Tue, 5 Nov 2002 21:19:55 +0100, "Reginald R. Richardson"
<[EMAIL PROTECTED]> wrote:
> Hi there,
>
> Has any got Bearing to work with KPN's MxStream in the netherlands
>
>
> MxStream uses a VPN type connection between the router and the
> modem, A pptp connection is open between r
Hi,
I had the same problem last week. I got it work when I
used an old syslinux (the one from Daschtein Utils).
I think that the problem is with newest version of
syslinux, but could get confirmation from the syslinux
group.
Nick
"S Mohan" wrote:
>
> I'm home at last. I did a mixture of thin
I've found that the network card was really in full-duplex mode. So I
changed it a I'm going to try
the router soon.
But another question: As I wrote, the cable modem isn't at my flat. And I
need
to reset it remotely (if i want to experiment with my problem).
It means whithout switching the power
I've found that the network card was really in full-duplex mode. So I
changed it a I'm going to try it at the router soon.
But another question: As I wrote, the cable modem isn't at my flat. And I
need to reset it remotely (if i want to experiment with my problem).
It means whithout switching th
Hi;
Running bering 1.0-rc3 with freeswan 1.98b, dhcpd.
I have working configurations for ipsec 'road warriors'
connecting via SSH Sentinel. What I would like to do is be able
to have a dhcp assigned address from my internal subnet assigned to
these 'road warrior' conn
I may have a solution to your problem...
I had a similar problem with my cable modem, at random times
(sometimes days) I have to cut the power to
my cable modem. The solution I came up with is
2 part. One part is script and the other is a little
circuit. The circuit connects to the serial port on m
Hi, i've been using lrp for years now, and a few
months ago began running dachstein floppy. I've come
to the point where i have about 40bytes of floppy
space left!
Here's my question:
is it at all possible to boot over the network (using
a tftp server) without a dhcp or bootp server running?
i
On Tuesday 05 November 2002 21:06, mike rien wrote:
> Here's my question:
> is it at all possible to boot over the network (using
> a tftp server) without a dhcp or bootp server running?
> is there any way to program the nic's rom (or use a
> minimal floppy boot disk) to set all the info normally
On Tuesday 05 November 2002 17:08, Chris Price wrote:
> Hi;
>
> Running bering 1.0-rc3 with freeswan 1.98b, dhcpd.
>
> I have working configurations for ipsec 'road warriors'
> connecting via SSH Sentinel. What I would like to do is be able
> to have a dhcp assigned address from my int
I fwd your request to leaf-user list
JN
Le Mardi 5 Novembre 2002 01:06, Lance Dunn a écrit :
> As a past user of the Dachstein distro of LEAF, I was glad to be able to
> upgrade to Bering and take advantage of the newest kernel and also the
> firewall capabilities of Shorewall. The installation was
--On Wednesday, November 06, 2002 7:09 AM +0100 Jacques Nilo
<[EMAIL PROTECTED]> wrote:
My local net computers obtain a lease from DHCP for 24 hours, which upon
expiry cannot seem to be able to renew it. Can you tell me what
parameter I have missed that will automatically allow lease renewal?
42 matches
Mail list logo
