Hello List,
after using Bering 1.2 and Lince, stuffed in flashes on two Soekris
4801 boards for a year or so, I am playing with Bering uClibc 2.2.3.
I find dnsmasq handy for resolving the /etc/hosts for local
workstations. But I find it strange that dnsmasq will not resolve a
machine name with
I'd appreciate a recommendation from the list on which 4-port NICs work
best with the Bering uClibc distro?
Any known problems using them with single-port NICs on the same machine?
Thanks!
--Cal Webster
---
SF email is sponsored by - The IT
Hi All,
I've got bering uclibc 2.3.1 beta version running fine and have setup
buildtool so that I could get OpenVPN 2.0rc16 running. I've also got my
asterisk server configured so I can call home with certain CLI and
open/close straight public key ssh access to the box for when i'm away
from t
> I'd appreciate a recommendation from the list on which 4-port
> NICs work best with the Bering uClibc distro?
>
> Any known problems using them with single-port NICs on the
> same machine?
The situation is the same as with a normal distro. uClibc uses modules;
therefore, you can insert comma
Thanks for the info Peter.
Here are my choices so far:
Intel: Intel PRO/1000 MT Quad Port Server Adapter $337
Osicom: FE-2404-TX - 10/100BTX PCI FAST ENET NIC $329
Adaptec: ANA-64044LV 4-Port, 64-bit/66 MHz PCI NIC $409
Obsolete but available in obscure locations:
D-Link: DFE-570TX 4 port 2114
> Intel: Intel(r) PRO/1000 MT Quad Port Server Adapter $337
> Osicom: FE-2404-TX - 10/100BTX PCI FAST ENET NIC $329
> D-Link: DFE-570TX 4 port 21143 card (avail only on eBay) $80
> I'm thinking the Intel NIC would be best, but after looking
> at it on intel.com I'm not sure it'll fit in a PCI slo
On Thu, Apr 07, 2005 at 09:36:50AM +0200, [EMAIL PROTECTED] wrote:
>
> after using Bering 1.2 and Lince, stuffed in flashes on two Soekris
> 4801 boards for a year or so, I am playing with Bering uClibc 2.2.3.
> I find dnsmasq handy for resolving the /etc/hosts for local
> workstations. But I f
Nothing over 100 Mb this year. Numbers below are maximum bandwidth. The
2 Mb links are cable Internet, and the < 1 Mb are old DSL links used as
fail-over inter-building links.
Legend:
* Expect link saturation during peak times
+ light to moderate traffic load
- light traffi
Is there anyone who had success using X21 cards ( any kind )???
I am about to connect to sites with X21.
I am between 2 options.
a) Using routers from the market
b) Use lrp boxes and install the appropriate cards ( sagoma ... etc )
Any input with succes stories or fails would be of great hel