Hi,
Does someone know wich module/s should I use with an RTL8139C chip based
NIC?
It's a PCI card. So I guess I should do
pci-scan
somemodulehere
is this OK??
Thanks
Sergio D. Morilla
[EMAIL PROTECTED]Sán Martín
647 Piso 2
Sistemas
Hi all,
I have an old Compaq 5100 with an embedded AMD PCNET ethernet card.
Does anybody know if which module to use and if this is a PCI card??
Thanks in advance
Sergio D. Morilla
[EMAIL PROTECTED]Sán Martín
647 Piso 2
Sistemas
Hi,
I´m trying to set up Dachstein RC2 on a hard disk.
So far I got my DRC2 (it remembers me R2D2), but when it tries to mount
the device i got a message:
mount: Mounting /dev/hda2 on /storage failed: Operation not supported by
device
I have ext2.o in my /etc/modules
After checking for some e
Too fast with my fingers!!!
Charles is there some package like hdsupp.lrp for reserfs???
I found reiserfs.o on but none "mkreiser"??
Where can i look for them??
Thanks
Sergio
-Mensaje original-
De: Sergio Morilla
Enviado el: Tuesday, November 27, 2001 16:23
Para
Hi,
My ISP has some sites that have different versions of nimda on their
servers.
I am constantly being scaned on port 80. I know there should be a way to
log
this on an alternate log file.
A fragment of syslog.conf looks
*.=info;*.=notice;*.=warn;\
auth,authpriv.none;\
cron,dae
The obvious question is...
Where can I get syslog-ng.lrp and some info about it??
-Mensaje original-
De: David Douthitt [mailto:[EMAIL PROTECTED]]
Enviado el: Tuesday, December 04, 2001 15:25
Para: LEAF Users List
Asunto: Re: [Leaf-user] Alternate loging
Sergio Morilla wrote:
>
Hi all,
I have downloaded squid-2.lrp from Koog Wong site. It´s version
2.2.STABLE4-1.
Being the latest version, 2.4.STABLE3, I was wandering if someone has
released it.
Thanks
Sergio D. Morilla
Sistemas
Tipoiti SATIC
San Martín 647 Piso 2 Tel. : +54 11 4314-4482
C1004AAM - Buenos
Dave
Thanks for the package and the dependecies info!!
Just one more question, I would like to move the cache to an HD I have
on the computer, is this a paremeter on squid.conf?
Thanks
-Mensaje original-
De: David Douthitt [mailto:[EMAIL PROTECTED]]
Enviado el: Wednesday, December 12, 20
Hi,
I´ve just burned dachstein-cd-v1.0.2.iso and made the boot floppy from
the image included.
When I went to /lib/modules there is no single file. Why?
Do I need to load every ip_masq* and net support files from diskette??
Are this files in another .lrp file???
Thanks
Sergio D. Morilla
Sistem
that name found
I can´t see why it loads (lsmod shows it) 8390 and does not load the
other modules.
Any hint
Thanks
-Mensaje original-
De: Charles Steinkuehler [mailto:[EMAIL PROTECTED]]
Enviado el: Friday, December 14, 2001 12:56
Para: Sergio Morilla; Leaf-user@lists. sourceforge. net (E
/etc). No luck
Any idea?? I´ve recreated the floppy disk and I´m tempted to burn a
new CD.
-Mensaje original-
De: Charles Steinkuehler [mailto:[EMAIL PROTECTED]]
Enviado el: Friday, December 14, 2001 16:38
Para: Sergio Morilla
CC: Leaf-user@lists. sourceforge. net (E-mail)
Asunto:
Hi,
I have a DCD 1.02 router running just perfect!!
I needed to add aditional routes.
So far I managed to get them working adding the following
statement on network.con in the if_up() function just prior to
return 0 (My router is 192.168.1.250)
ip route add 192.168.2/24 via 192.168.1.254
Hi,
I remember having read how to set up an apache server on LRP some time ago.
It used perl.lrp, perl5m.lrp and apache.lrp and apache.tgz.
I have these files (all that remains from and very old attempt to set it up),
finally I have some decent hardware where to run it but I lost this "how-to".
Hi,
Wich would be the DCD equivalent to:
gunzip < /xfer/files.tgz | untar
Tried several times but get busybox errors
Thanks
Sergio D. Morilla
Sistemas
Tipoiti SATIC
San Martín 647 Piso 2 Tel. : +54 11 4314-4482
C1004AAM - Buenos Aires Fax : +54 11 4508-6425
Argentin
Hi,
This is what I have used.
I could not find the url but it works on my Dachstein Floppy and CD routers
About time servers, I got mine from a search for "time server" on the net
Sergio
From:
Charles Steinkuehler <[EMAIL PROTECTED]>
I would like to provide a very small web page on my external
interface and weblet on the internal interace.
I thought on modifying weblet pages and repackage everything
in a www.lrp package to serve a very small web page.
Is there a way to do this? How?
I should be able to identify where the requ
Hi all
I want to have some files in a personal package so when I create
a new disk or upgrade from one version to another I have this
files installed easily.
Easy task I thought. Not so!!!
I created a file called tpt.list with the list of files I wanted
on my package.
Then I created a file tpt.
Hi,
I'm trying to set up portforwarding for M$ VPN (PPTP) to an internal
server 192.168.1.24
So far I figured the following:
# Indexed list: "SrcAddr/Mask port [ DestAddr[/DestMask] ]"
#EXTERN_TCP_PORT0="5.6.7.8 domain 1.1.1.12"
#EXTERN_TCP_PORT1="0/0 www"
EXTERN_TCP_PORT0="0/0 smtp"
Hi,
I'm trying to enable login using putty, sshd anf key files
I copyed the key generated with puttygen (SH2RSA) into
authorized_keys2.
All I get is "Server refused our key".
There is no log file for sshd.
How can I know what I´m doing wrong?
Any how-to???
Thanks
Sergio D. Morilla
Sistemas
Tip
Enviado el: Friday, February 15, 2002 15:12
> Para: Sergio Morilla
> CC: Leaf-user@lists. sourceforge. net (E-mail)
> Asunto: Re: [Leaf-user] sshd and putty loggin with keyfile
>
>
> On Fri, 15 Feb 2002, Sergio Morilla wrote:
>
> > Hi,
> >
> > I'm tr
right now. But when I tested this I put
all four lines in /etc/ipchains.input and everything worked
flawlessly.
Sergio
> -Mensaje original-
> De: Boyd Kelly [mailto:[EMAIL PROTECTED]]
> Enviado el: Monday, March 11, 2002 20:17
> Para: Sergio Morilla
>
Hi all,
I´m havin a lot of dnyed packets on port 53, like this one:
Mar 14 13:46:13 tptrtr kernel: Packet log: input DENY eth0 PROTO=6
202.139.133.129:46069 200.45.110.178:53 L=44 S=0x00 I=0 F=0x T=237 (#65)
When I check them on http://www.echogent.com/cgi-bin/fwlog.pl
I got no advice on i
Thanks.
Very clear and informative!!
More comments inline
> > I´m havin a lot of dnyed packets on port 53, like this one:
> > Mar 14 13:46:13 tptrtr kernel: Packet log: input DENY eth0 PROTO=6
> 202.139.133.129:46069 200.45.110.178:53 L=44 S=0x00 I=0
> F=0x T=237 (#65)
> > The results of lis
Hi,
Is there a Bering kernel with IDE support?
I'm trying to set up Bering booting from HD
and I current linux file does nor support HD.
Where can I get it??
Sergio D. Morilla
Sistemas
Tipoiti SATIC
San Martín 647 Piso 2 Tel. : +54 11 4314-4482
C1004AAM - Buenos Aires Fax
Hi,
I'm trying to setup Dachstein 1.02 as an application server.
Which settingd other than:
IPFWDING_KERNEL=NO
IPFILTER_SWITCH=NONE
eth0_IPADDR=192.168.1.245
eth0_MASKLEN=24
eth0_BROADCAST=+
eth0 starts but ping to network does not work
# ip route
192.168.1.245/24 dev eth0 proto kernel scope
Hi,
I'm trying to set up a small footprint web server on top
DCD 1.02.
I have Apache running on my firewall and I want to move it
to an independant server.
So far I setted up DCD 1.02 booting from a hard disk on
a new computer.
In network.conf I use:
IPFWDING_KERNEL=NO
IPFILTER_SWITCH=NONE
e
Hi,
I have the following martian over and over my log files.
Mar 20 09:36:45 tptrtr kernel: martian source for ff01a8c0, dev eth1
Mar 20 09:36:45 tptrtr kernel: ll header: ff ff ff ff ff ff 00 50 04 a4 f2 09 08 00
If I decode it:
Source Destination
ff01a8c0
0.0.0.0 1
Hi,
Just a quik question.
Is Bering based on Debian 2.2 r5??
If so, can I freely use Debian programs on Bering, provided
the necessary libraries ar available?
How do I detect program libraries dependencies??
Thanks
Sergio D. Morilla
Sistemas
Tipoiti SATIC
San Martín 647 Piso 2 Tel
Dustin,
This was my setup and it worked!
Hope this helps
Watch out this are indexed variables!!! Change them!!!
#EXTERN_TCP_PORT4="0/0 1723 192.168.1.24/32"#Microsoftp PPTP
#EXTERN_PROTO0="47 0/0 192.168.1.24/32" #GRE
INTERN_PPTP_SERVER=192.168.1.xx # Internal M$ PPTP server to make
Hi,
I was reading dnscache documentation and I wanted it to resolve
internal addresses using our internal DNS server.
In http://cr.yp.to/djbdns/faq/cache.html it reads:
How do I tell my cache to consult internal DNS servers? Our network has internal
servers at IP addresses 10.1.2.5 and 10.1.2.
Hi,
I have a very long rate of this martians in my logs.
Apr 30 08:08:06 tptrtr kernel: martian source for ff01a8c0, dev eth1
Apr 30 08:08:06 tptrtr kernel: ll header: ff ff ff ff ff ff 00 50 04 a4 f2 09 08 00
Translated
ff01a8c00.0.0.0 for
inal-
> De: Kelly D. Wason [mailto:[EMAIL PROTECTED]]
> Enviado el: Wednesday, May 01, 2002 09:20
> Para: Sergio Morilla
> Asunto: RE: [leaf-user] Martians - Why??? narp??? Backdoor??
>
>
> I ran into this problem one time when I inadvertently
> connected eth0 back to
&
I continue
trying to find out the offending program.
Thanks
Any Thoughts??
> -Mensaje original-
> De: Charles Steinkuehler [mailto:[EMAIL PROTECTED]]
> Enviado el: Thursday, May 02, 2002 16:12
> Para: Sergio Morilla
> CC: Leaf-user@lists. sourceforge. net (E-mail)
>
Hi,
I would like to set snmp.lrp on my LRP DCD1.02.
I would like some hints and links in order to
learn how to setup snmp.lrp properly providing
eht* usage, cpu usage, etc. and provide this
info to a another server using mrtg.
I've loaded smnp.lrp but information in smnpd.conf
look pretty crypti
ll SNMP (YES/NO)
# List of IP Nos used for SNMP management
#SNMP_MANAGER_IPS="192.168.1."
I would also like some hints and links in order to learn how to setup
snmp.lrp properly providing eht* usage, cpu usage, etc. and provide
this info to a another server using m
Hi,
I'm just making my first steps in shell programming.
I'm sure there must be an easy way to strip the path from
a filename (as provided by find for example) in order
to use it as a base for fhurther processing.
Sed??
Thanks
Sergio D. Morilla
Hi,
I have these messages in my logs.
Dec 17 06:45:33 tptrtr kernel: host 1801a8c0/if8 ignores redirects for c803a8c0 to
fe01a8c0.
Dec 17 07:02:05 tptrtr kernel: host 1801a8c0/if8 ignores redirects for c803a8c0 to
fe01a8c0.
Dec 17 07:18:38 tptrtr kernel: host 1801a8c0/if8 ignores redirects for
Sorry forgot the list!!
-Mensaje original-
De: Sergio Morilla
Enviado el: Wednesday, December 18, 2002 13:07
Para: 'Charles Steinkuehler'
Asunto: RE: [leaf-user] Ingnore redirects
Thanks Charles!!
I had my leaf firewall set as the default GW, and had always managed
routi
ip
> NOTE: You don't *HAVE* to add a static route to your windows
> box. It's
> perfectly OK to have your PDC send packets to the firewall,
> which then
> forwards them to the Vanguard (just a bit inefficent since
> packets hit
> the same cable twice). In this case, you'd probably want to
39 matches
Mail list logo