> The Dachstein tulip driver doesn't appear to support this.
> I got the most recent tulip driver from the Becker website (above).
>
> I will attempt to build the tulip module I need from this.
> Then send it to you, if you're interested.
>
> I would appreciate a little advice, if you have a mome
Charles, this from Donald Becker
>That's an ADMtek Comet chip. Here is the entry in tulip.c
> { "Accton EN1217/EN2242 (ADMtek Comet)", { 0x12161113, 0x },
> TULIP_IOTYPE, TULIP_SIZE1, COMET },
> You should use
>http://www.scyld.com/network/tulip.html
> ftp://www.scyl
> I'd suggest upgrading to the 2.2.19 kernel. You don't have to upgrade
your
> whole distribution to do this...just replace the kernel file on the floppy
> (the file named linux) and the modules in modules.lrp. You can even cheat
> and start with the files from a Dachstein relese (just make a Da
I'd suggest upgrading to the 2.2.19 kernel. You don't have to upgrade your
whole distribution to do this...just replace the kernel file on the floppy
(the file named linux) and the modules in modules.lrp. You can even cheat
and start with the files from a Dachstein relese (just make a Dachstei
> The question is how to build a module for 2.2.16 if you don't have 2.2.16
Pretty tough...
> I can't get the old SMC cards ( rtl8139.o)
> The new SMC EZCard 10/100 are very attractive but
> apparently use the tulip driver.
> The 2.2.16 tulip.o doesn't work with this board.
> ( i guess it doe
The question is how to build a module for 2.2.16 if you don't have 2.2.16
I can't get the old SMC cards ( rtl8139.o)
The new SMC EZCard 10/100 are very attractive but
apparently use the tulip driver.
The 2.2.16 tulip.o doesn't work with this board.
( i guess it doen't work, insmod yield de