- Original Message -
From: "Liam Tumulty" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, June 22, 2001 2:54 AM
Subject: pppoe
> Hi, I'm putting together a linux router and got your image up and running
> (thanks), but would like to use some of the features in the new EigerStei
I use Charles' Dachstein - get the help and iso file from here
http://leaf-project.org/doc/guide/install-dachstein/ds-contents.html
1. PPPoE (Peter Nosko)
--__--__--
Message: 1
Date: Mon, 2 Jan 2006 20:21:08 -0800 (PST)
From: Peter Nosko <[EMAIL PROTECTED]>
Reply-To: Peter Nosko <[EMAIL
OTECTED]>
Sent: Friday, June 22, 2001 3:05 PM
Subject: [Leaf-user] Re: pppoe
> - Original Message -
> From: "Liam Tumulty" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, June 22, 2001 2:54 AM
> Subject: pppoe
>
>
> > Hi, I'm
Bentzy Sagiv wrote:
Hello Charles!
I found you at http://lrp.steinkuehler.net/
I'm a linux newbie looking for veteran's sympathy :).
My goal is to enable a diskless computer to connect an ISP using PPtP and/or
PPPoE.
This computer loads it's linux image from a boot server at the LAN.
I have an
> It seems I can't get pppoe to work. I exactly configured
> according to the manual. But if I put both ethernetcard
> drivers in the modules-file the system locks up at startup
> (at configuring interfaces). I use two type of
> ethernetcards: eepro100 (pci) and a HP NC16 (lance module,
> ISA). Th
> I am using EigerStein_contrib_img_pppoe-beta0.4.exe
>
> I am having trouble getting the nameservers from my ISP known by LRP.
> Example ping www.yahoo.com yields: ping: unknown host www.yahoo.com
> What else must I do? I would like the address's picked up from ppp so
when
> they change I don't
Hi Eric
Thanks for your development of this BeringLinux
and thanks for rapid response
>are you sure your new provider does use pppoe and not
another method to connect.
>pppoe without an user and a password is unusual.
No... but now i learned that i have i cable
connection, but i got the same eq
Hi again
Lynn Avants wrote:
>Protocols and equipment do not necessarily mean
>the same thing. I'm a firm believer that the only
reason
>any ISP uses PPPoE is to try and leverage the extra
>money out of a static ip connection
>
>Is pump, your interfaces file, and shorewall all
configured to
>g
Ray Olszewski wrote:
What do you mean by "a fixed IP"? This is the first
mention of "fixed"
in
your reports to us, and I associate that term with
"static", which
would
mean your ISP uses neither PPPoE nor DHCP. If this is
right, follow the
instructions for a static-address connection.
But on
Ok.. thats a lot of things to try out, thanks
I´ll give a word when it all blows up here :)
PS. chill out man, and thanks again
Yahoo! Mail (http://dk.mail.yahoo.com) - Gratis: 6 MB lagerplads, spamfilter og
virusscan
---
This SF.net email is
Hello again
I turned off my modem over night, and now it all runs
perfect
pump gets it´ address
Thanks..!
I was´t able to get an IP under win2000 on a third MAC
address either
so powering off the modem over night, released this
"DHCP trust"
Regards
Lasse
Yahoo! Mail (http://dk.mail.yahoo.com) -
On Tuesday 09 December 2003 07:48 pm, and hansen wrote:
> No... but now i learned that i have i cable
> connection, but i got the same equipment
> as with my previous ISP, but they used PPPoE :)
Protocols and equipment do not necessarily mean
the same thing. I'm a firm believer that the only reaso
Lynn's advice is correct here, except that "ask your provider" betokens
more optimism than I have on a day-to-day basis about the helpfulness of
ISPs. If your provider is as unhelpful as I'm used to seeing, see how they
say to connect a Windows computer to their system (they always tell you
*th
, December 10, 2003 2:48 AM
To: [EMAIL PROTECTED]
Subject: [leaf-user] Re: PPPoE without username and password
Hi Eric
Thanks for your development of this BeringLinux
and thanks for rapid response
>are you sure your new provider does use pppoe and not
another method to connect.
>pppoe with
At 05:08 PM 12/10/2003 +0100, and hansen wrote:
[...]
Yes :)) my ISP only support Windows and MacOSX+9, but
lets see what time
will bring to linux, thats a other discussion.
My connection is a ADSL-512/128 thats what i get of
info
but now i know that it´s a cable with a fixed IP, so
pump
must be it
sorry my poor layout, but i use a stupid web mail.
as i have written before, my connection rightnow
written this mail, i use macos with dhcp enablet
"so im using a cable connection"
i know i´t not a real fixt IP but i get, the same
IP always, ok
Assuming that you have the network card working i
At 06:24 PM 12/10/2003 +0100, and hansen wrote:
[...]
sorry my poor layout, but i use a stupid web mail.
as i have written before, my connection rightnow
written this mail, i use macos with dhcp enablet
"so im using a cable connection"
i know i´t not a real fixt IP but i get, the same
IP always, ok
lto:[EMAIL PROTECTED] Behalf Of and hansen
Sent: Thursday, December 11, 2003 5:35 AM
To: [EMAIL PROTECTED]
Subject: [leaf-user] Re: PPPoE without username and password
Hello again
I turned off my modem over night, and now it all runs
perfect
pump gets it´ address
Thanks..!
I was´t able to get a
18 matches
Mail list logo
