Hello all,
First of, my definition of Load Balancing is 2 or more Modems in a
machine and both are used to connect to a network or ISP, increasing the
maximum possible bandwidth.
A friend asked me a question.
Is it possible to load balance two ADSL connections? One is his, one is
his neighbours.
On Fri, 2003-09-12 at 01:43, James Neave wrote:
> Hello all,
>
> First of, my definition of Load Balancing is 2 or more Modems in a
> machine and both are used to connect to a network or ISP, increasing the
> maximum possible bandwidth.
>
> A friend asked me a question.
>
> Is it possible to loa
On 12 Sep 2003, Steve Wright wrote:
[...]
> The following will route each *packet* out a different port.
>
> ip route add equalize default \
>nexthop via DSL1-IP dev eth1 \
>nexthop via DSL2-IP dev eth1
>
>
> If you remove the word "equalize", then it will send each alternate tcp
> str
On Fri, 2003-09-12 at 11:32, Jeff Newmiller wrote:
> On 12 Sep 2003, Steve Wright wrote:
>
> [...]
>
> > The following will route each *packet* out a different port.
> >
> > ip route add equalize default \
> >nexthop via DSL1-IP dev eth1 \
> >nexthop via DSL2-IP dev eth1
> >
> >
> > If
s LEAF box. Is that right?
Thanks everybody!
James
-Original Message-
From: James Neave
Sent: 11 September 2003 14:44
To: [EMAIL PROTECTED]
Subject: [leaf-user] Load balancing.
Hello all,
First of, my definition of Load Balancing is 2 or more Modems in a
machine and both are used to co
I'm an Internet Networking Engineer @ UUNET (now MCI) and I
know about load balancing. The best 50/50 way of load balancing is
if 2 circuits are on the same router on boths ends. The ISP needs to
insert a static route for your network block down both links.
That will force all traffi
ve Wright [mailto:[EMAIL PROTECTED]
Sent: 11 September 2003 23:15
To: James Neave
Cc: LEAF-USER
Subject: Re: [leaf-user] Load balancing.
On Fri, 2003-09-12 at 01:43, James Neave wrote:
> Hello all,
>
> First of, my definition of Load Balancing is 2 or more Modems in a
> machine and
ames.
-Original Message-
From: Steve Wright [mailto:[EMAIL PROTECTED]
Sent: 11 September 2003 23:15
To: James Neave
Cc: LEAF-USER
Subject: Re: [leaf-user] Load balancing.
On Fri, 2003-09-12 at 01:43, James Neave wrote:
> Hello all,
>
> First of, my definition of Load Balancing i
Hello All,
Some more Q's after starting to build Alex's big network.
Well, after an industrious Sunday, I've managed... well, not that much
really.
Two big problems I ran up against.
One of the NICs required the rtl8139.o module.
But this would not load without pci-scan.o loaded.
I only found t
On Mon, 6 Oct 2003 10:53:13 +0100, James Neave <[EMAIL PROTECTED]>
wrote:
Hello All,
Some more Q's after starting to build Alex's big network.
Well, after an industrious Sunday, I've managed... well, not that much
really.
Two big problems I ran up against.
One of the NICs required the rtl8139.
October 2003 10:53
To: [EMAIL PROTECTED]
Subject: RE: [leaf-user] Load balancing.
Hello All,
Some more Q's after starting to build Alex's big network.
Well, after an industrious Sunday, I've managed... well, not that much
really.
Two big problems I ran up against.
One of the NI
Hi all
I have 2 Adsl Router with both 128K .. I would like to set load balancing on my
bering box but I have no idea about that.. I try to search information on internet..
Anyone know please tell me..
thanx.
---
This sf.net email is spon
On Wed, 2003-09-10 at 16:32, Thitiporn Pornpirunrak wrote:
> Hi all
> I have 2 Adsl Router with both 128K .. I would like to set load balancing on my
> bering box but I have no idea about that.. I try to search information on internet..
> Anyone know please tell me..
Do you want to balance
Charles,
I went back through my archives and couldn't find the outcome of your
search for the holy grail of Load Balancing/Sharing two broadband
connections for outside connectivity.
What was the outcome of your quest? Is it possible? What is required
to accomplish this monumenta
14 matches
Mail list logo
