> "Alberto" == Alberto Bursi writes:
Alberto> On 06/04/2017 02:54 PM, QWeRKUS qwErkus wrote:
>> Thank you for your reply. JTAG seems even trickier than serial. So
>> far all my attempts to scan for a valid JTAG chain end up with:
>>
>> Error: JTAG scan chain
On 06/04/2017 02:54 PM, QWeRKUS qwErkus wrote:
> Thank you for your reply. JTAG seems even trickier than serial. So far
> all my attempts to scan for a valid JTAG chain end up with:
>
> Error: JTAG scan chain interrogation failed: all zeroes
>
> There a just too many variables to check for a
Thank you for your reply. JTAG seems even trickier than serial. So far
all my attempts to scan for a valid JTAG chain end up with:
Error: JTAG scan chain interrogation failed: all zeroes
There a just too many variables to check for a newbie like myself, so
I guess I'll go with the spi
> "QWeRKUS" == QWeRKUS qwErkus writes:
QWeRKUS> Thank you for your replies. Turns out the problem was the
QWeRKUS> ground connection, and serial nowworks with
QWeRKUS> pl2303. Unfortunately I mixed up 2 addresses when flashing the
QWeRKUS> new firmware, and erased from
Thank you for your replies. Turns out the problem was the ground
connection, and serial nowworks with pl2303. Unfortunately I mixed up
2 addresses when flashing the new firmware, and erased from 0x9f00
on instead of 0x9f02. As a result, my boot loader is corrupt. Now
I'm trying some last
> "QWeRKUS" == QWeRKUS qwErkus writes:
QWeRKUS> Hello, Something went wrong with my last flash of an archer c7
QWeRKUS> v2, and now the device refuses to boot. I'm trying to unbrick
QWeRKUS> it without success since.
QWeRKUS> 2. I tried to get a serial access to the
On 01/06/17 09:27, QWeRKUS qwErkus wrote:
Hello,
Something went wrong with my last flash of an archer c7 v2, and now
the device refuses to boot. I'm trying to unbrick it without success
since.
Wasted tons of hours on this, and would really be thankful for any
advice/pointers.
Advice that
Hello,
Something went wrong with my last flash of an archer c7 v2, and now
the device refuses to boot. I'm trying to unbrick it without success
since.
1. TFTP seems to work, and I can send a recovery bin. I used a
stripped firmware from here
http://www.friedzombie.com/tplink-stripped-firmware/ -