Hello Everyone.
Yes that is a Wood Chuck. the motor drive is the old style (it is under powered
but works), All the gears will work on the older Legacy's (small teeth gears)
Mike what are your plans to do with this machine? It is a Legacy's Older
brother, It dose the same things but it also
You wont regret it mike when you get it let us know and we will let you know
how to set it for optimum smooth running
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Mike Newman
Sent: Monday, 13 February 2023 3:04 PM
To: Legacy Ornamental Mills
Subject: Re: Productive
Yea I will buy them sold lolol
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, 13 February 2023 2:44 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Thought
Oh my goodness its a wood Chuck make him an offer and grab it. It has
Yes not using the bags and letting the chips fly does stop the building up I
unwanted places
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, 13 February 2023 2:37 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Productive Saturday
That looks like a woodchuck one of legacys very early mills the controller and
motor alone would be worth $700 which I would buy I need another control
Box so if you need a drive motor for your legacy grab it . if your starting out
and don’t have a mill it would give you a mill to play with
But
Thanks for the idea on the xtream I just put one on order. It solves a
number of problems for me and my setup. As far as testing goes my
professional life is centered around product development and quality so I
am "trained" to continually try new things looking for improvements. To me
it is
you will never go back to the old chuck if you add the extension. Once you
get the chuck in its sweet spot you have a friend for life.
I got them on all my LOM"s
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
Oh my goodness its a wood Chuck make him an offer and grab it. It has a
drive motor and controls.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Feb 12, 2023 at 6:57 PM Eric Gantner
wrote:
> I
Of course
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Feb 12, 2023 at 6:16 PM wrote:
> Thank you sir
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
>
It's sure awesome your doing all the testing and trials. Like I mentioned,
most of us probably do not use the
plastic trips or the dust bag. But good to test and learn for sure.
Keep up the great content and testing Mike as it's super great to hear the
new guys enjoying the LOM's.
Kind Regards,
That router bit adapter looks interesting. I have seen a few videos online
that show that accessory in action. Also my thin stock design is the
problem. It is an upward facing V which is simple in concept but can catch
sawdust and force it behind the material. There is another thread that
Can you please post a pic of your thin stock support it may be the design you
used causing you problems
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Mike Newman
Sent: Monday, 13 February 2023 10:31 AM
To: Legacy Ornamental Mills
Subject: Re: Productive Saturday in
Thank you sir
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, 13 February 2023 9:16 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Spindle Drive Modification
Yes and extremely well designed I might add.
Kind Regards,
I didn’t know that curt good tip as you know I cand get Dyna-Glide but what I
do use when I have finished
I turn the can upside down and give it a couple of quick squirts to clean the
nozzle this helps on any spray can to keep the spray working but on Dyna-Glide
I have no idea
Bill
I tested my new dust shields while making a new walking stick today. Here
is what I learned. Dust shields kept 90% of the dust in the bag which was
great. I also tried the rounding method today where you use a handle on
both the x-axis and the spindle for the first time. I had two issues.
Welcome to the group Nathaniel Jeff from Connecticut Legacy Model 900 - ManualSent from my iPhoneOn Feb 12, 2023, at 1:23 AM, 'Curt George' via Legacy Ornamental Mills wrote:
Hello Nathaniel First off, Thank you. and Welcome to the group.The Legacy is a very good machine but there is a
Yes and extremely well designed I might add.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Feb 12, 2023 at 12:33 AM wrote:
> There are other ways to mound a spindle motor on your legacy I chose
Welcome to the group Nathanial.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Feb 12, 2023 at 12:23 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
Thanks for the comments. So far I love the Triton router. It has been a
game changer for me relative to z=axis depth control vs my older router.
Not as loud as the older one too. Biggest issue so far is that it is
designed for table mounting so the spindle lock kicks in when fully plunged
Good morning.
I have had this happen before. I suggest to shake the can before you use it,
this helps to break up the sediment that is clogging up the spray nozzle. It
could also mean that your can is running low. I use Dyna-Glide all the time,
(and have at least 3-4 cans on the shelf at all
20 matches
Mail list logo
