Thanks – someone in the group emailed me a copy.
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Richard Ellis
Sent: Sunday, August 11, 2019 5:41 PM
To: Legacy Ornamental Mills
Subject: Re: Just to confirm this will fit the Revo - thanks
Hi Ray
I have a manual and loads of
Hi Ray
I have a manual and loads of other stuff . But no copier . But you are
welcome to come over and study it,and also have a look at my Revo .
I am a little puzzled though !! When I visited you, I saw the Revo in your
barn ,with a Triton router fixed to it. ( a bit rusty on the chuck and
Send me your email address and I will send you one if its ok with Tim K
normally its his job but I’m not sure if he has access to his one where he is
right now
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Ray
Sent: Saturday, 10 August 2019 8:09 PM
To:
I only got a couple of DVDs and I have no idea where there are.
*groan*
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of bulke...@mmnet.com.au
Sent: Friday, August 9, 2019 11:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the
There’s a manual? I never got one. Can anyone email me a scanned copy please?
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of bulke...@mmnet.com.au
Sent: Friday, August 9, 2019 11:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the
Ps if your revo is in pieces follow the manual putting it back together
remember the rails are not the same both sides even though the look it they
only go one way up or the saddle and cross slide wont slide smoothly
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of
Yup – have now ordered the insert thanks.
All I need now is for it to arrive and to put my REVO back together ☹
Ray
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of bulke...@mmnet.com.au
Sent: Friday, August 9, 2019 6:39 PM
To: legacy-ornamental-mills@googlegroups.com
I see now I understand as long as the insert thread is the same as your chuck
you will end up with a chuck that fits your revo
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Ray
Sent: Saturday, 10 August 2019 1:35 AM
To: legacy-ornamental-mills@googlegroups.com
Havent yet got the insert.
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of bulke...@mmnet.com.au
Sent: Friday, August 9, 2019 12:18 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Just to confirm this will fit the Revo - thanks
I don’t get it? If you have the
You are totally right Richard that’s why all questions on this group will be
answered if possible no matter how simple they are or how often asked sharing
knowledge is what we’re all about.
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Richard Ellis
Sent: Friday,
Tim
I think you are right and of course Bill certainly is . But the question
that Ray has asked may help someone somewhere ,, some time !!
Richard
On Friday, August 9, 2019 at 7:37:25 AM UTC+1, Tim wrote:
>
> Just wanted to say, welcome to the group and feel free to ask any question
> to keep
Just wanted to say, welcome to the group and feel free to ask any question to
keep the LOM information flowing
Tim
On Aug 8, 2019, 2:21 PM, at 2:21 PM, Brafield Bodger wrote:
>
>>
>> I have a supernova with just that insert fitted :)
>>
>
> Thanks for your help.
>
>--
>You received this
I don’t get it? If you have the chuck and insert and you have your revo just go
and slip it on the headstock spindle and see if it fits what am I missing
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Brafield Bodger
Sent: Friday, 9 August 2019 7:21 AM
To: Legacy
>
> I have a supernova with just that insert fitted :)
>
Thanks for your help.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Well that's good! I'm in sunny Spokane, Wa right now so swinging by home ain't
an option!
On Aug 7, 2019, 9:29 PM, at 9:29 PM, MWF wrote:
>Tim,
>
>You found your mind - it was not lost. All 3 of the output shafts on
>the Shopsmith Headstock are 5/8" diameter.
>
>So any lathe accessory that
Tim,You found your mind - it was not lost. All 3 of the output shafts on the Shopsmith Headstock are 5/8" diameter.So any lathe accessory that says it is an adapter for, or "fits" Shipsmith, will have to have a 5/8" diameter bore.You can sleep well - knowing that you have your mind well in
Um, I might be losing my mind, but shopsmith is a 5/8" bore, either my mind is
of, the ad is wrong or shopsmith has a new size. See...
https://www.pennstateind.com/store/L5818.html
Tim
PS. I'm a long ways away from mine to measures.
On Aug 7, 2019, 1:30 PM, at 1:30 PM,
Yes I believe it will provided the thread fits your chuck or you will need a
chuck with a ¾ dia X 16 TPI thread
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Brafield Bodger
Sent: Thursday, 8 August 2019 1:43 AM
To: Legacy Ornamental Mills
Subject: Just to confirm
https://www.ebay.co.uk/itm/NEW-LATHE-CHUCK-ADAPTER-3-4-X-16-TPI-MADE-IN-USA-FOR-THE-SHOPSMITH-MARK-V/273131056739?hash=item3f97e12e63:g:M~QAAOSwEjFXdFPy
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group
19 matches
Mail list logo
