t; -Original Message-
> From: Tim Ziegler
> Sent: Jan 24, 2019 11:29 PM
> To: Legacy Ornamental Mills
> Subject: Re: Ornamental Mills Around the World
>
>
>
> On Sunday, July 7, 2013 at 3:54:45 PM UTC-5, Tim wrote:
>>
>> I accidentally deleted this
It may be as simple as a permission in the settings?
On 1/25/2019 7:22 AM, RYAN JURGENS wrote:
I have been trying to add myself to the map, but it just doesn't seem
to work.
I click on the map as the instructions say but nothing happens. I am
an IT guy, so I kind of know what should happen
ekend.Laus Deo!Mac-Original Message-
From: Tim Ziegler
Sent: Jan 24, 2019 11:29 PM
To: Legacy Ornamental Mills
Subject: Re: Ornamental Mills Around the World
On Sunday, July 7, 2013 at 3:54:45 PM UTC-5, Tim wrote:I accidentally deleted this thread when I was trying to remove all the
You can't add yourself to the map at this time. I'll make an announcement when
it's back up again.
On Jan 25, 2019, 5:22 AM, at 5:22 AM, RYAN JURGENS
wrote:
>I have been trying to add myself to the map, but it just doesn't seem
>to work.
>I click on the map as the instructions say but
The map is still not working. I found a new way, but it takes a bit of
programming that I have not made the time to work out.
On Jan 25, 2019, 12:47 AM, at 12:47 AM, Richard Ellis
wrote:
>Tim
> The details and map are a little behind the times
>I bought the Revo from Martin a long while ago
hey Ryan,
I had the same problem and emailed Tim Krause to check on it. So I think
its getting looked at.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Fri, Jan 25, 2019 at 7:22 AM RYAN JURGENS
wrote:
I have been trying to add myself to the map, but it just doesn't seem to work.
I click on the map as the instructions say but nothing happens. I am an IT guy,
so I kind of know what should happen and I have tried what I can think of to
make it work but no such luck.
Suggestions?
Ryan
On
Tim
The details and map are a little behind the times
I bought the Revo from Martin a long while ago .-however he may
have bought another!!!
And owing to a house move and a lot of alterations can't get to play on it.
However I am now in Bedfordshire U.K. so you can stick me on the map
The online thread is safe, you only deleted your local message base.
On Jan 24, 2019, 8:29 PM, at 8:29 PM, Tim Ziegler wrote:
>
>
>On Sunday, July 7, 2013 at 3:54:45 PM UTC-5, Tim wrote:
>>
>> I accidentally deleted this thread when I was trying to remove all
>the off
>> topic messages in the
On Sunday, July 7, 2013 at 3:54:45 PM UTC-5, Tim wrote:
>
> I accidentally deleted this thread when I was trying to remove all the off
> topic messages in the thread.
>
> We have a hidden group map that shows where the owners of Legacy
> Ornamental Mills are located around the World.
>
>
Just west of Glendale on Silver Spring Drive
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Harvey Matyas
Sent: Monday, September 24, 2018 7:04 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Ornamental Mills Around the World
Ryan
Where in Milwaukee? I'm
Ryan
Where in Milwaukee? I'm in Greendale
On Mon, Sep 24, 2018 at 1:24 PM Ryan Jurgens wrote:
> Milwaukee Wisconisn, Legacy 1200 with z-axis and rotary table. (In the
> original shipping boxes unassembled)
>
> On Mon, Sep 24, 2018, 2:02 PM Tim Krause wrote:
>
>> Hi Ryan,
>>
>> Thanks for
Milwaukee Wisconisn, Legacy 1200 with z-axis and rotary table. (In the
original shipping boxes unassembled)
On Mon, Sep 24, 2018, 2:02 PM Tim Krause wrote:
> Hi Ryan,
>
> Thanks for trying, but at the moment the map is not taking any new
> members. Where are you located and remind me what
Hi Ryan,
Thanks for trying, but at the moment the map is not taking any new members.
Where are you located and remind me what machine you own.
Tim
On Sep 24, 2018, 9:31 AM, at 9:31 AM, Ryan Jurgens
wrote:
>For some reason I can't get anything tagged on the map. I get to the
>map
>(went to
For some reason I can't get anything tagged on the map. I get to the map
(went to Google Chrome) but when I click on it there is no new map nor
field to enter any information. Not sure why. I have Windows 10 on my
laptop.
Ryan Jurgens
On Sunday, July 7, 2013 at 4:54:45 PM UTC-4, Tim wrote:
>
im? Begat, if you are still there - and just "lurking" - please let us hear from you.Thanks.Wishing a safe and fun-filled week to all.Mac-Original Message-
From: Tim
Sent: Jul 30, 2018 12:28 PM
To: Legacy Ornamental Mills
Subject: Re: Ornamental Mills Around the World
Can someon
Can someone take a screen shot of the user map and send it to me.
artmarb...@comcast.net The map is located here
https://ornamentalmills.com/map/usermap.html
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from
Tim,As I have told you in the past - I/we REALLY APPRECIATE all that you have done & do for our LOM Group!Have a Wonderful Weekend.Mac-Original Message-
From: Tim Krause
Sent: Jun 1, 2018 4:35 AM
To: Legacy Ornamental Mills
Subject: Re: Ornamental Mills Around the World
Hi Mac,
Message-
>From: Tim
>Sent: May 31, 2018 12:07 AM
>To: Legacy Ornamental Mills
>Subject: Re: Ornamental Mills Around the World
>
>Thanks for trying, but the map feature is not worjking at the moment.
>Where are you located?
>
>
>-Tim
>
>
>
o: Legacy Ornamental Mills
Subject: Re: Ornamental Mills Around the World
Thanks for trying, but the map feature is not worjking at the moment. Where are you located?-TimOn Wednesday, May 30, 2018 at 9:20:42 AM UTC-7, varmit72 wrote:Just tried to add a marker to the map but was unable to do soOn
Thanks for trying, but the map feature is not worjking at the moment.
Where are you located?
-Tim
On Wednesday, May 30, 2018 at 9:20:42 AM UTC-7, varmit72 wrote:
>
> Just tried to add a marker to the map but was unable to do so
>
> On Sunday, July 7, 2013 at 2:54:45 PM UTC-6, Tim wrote:
>>
>>
Just tried to add a marker to the map but was unable to do so
On Sunday, July 7, 2013 at 2:54:45 PM UTC-6, Tim wrote:
>
> I accidentally deleted this thread when I was trying to remove all the off
> topic messages in the thread.
>
> We have a hidden group map that shows where the owners of
The map is in coma at the moment...meaning it's not dead, but it can't be seen
at the moment.
On May 12, 2018, 8:06 AM, at 8:06 AM, cole wrote:
>Looking for members near Nashville,TN can't get the map to pull up on
>my pad. Am Idoing something wrong?
>
>--
>You
Looking for members near Nashville,TN can't get the map to pull up on my pad.
Am Idoing something wrong?
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
to you some more in the future.
Have a good day.
C.A.G.
- Original Message -
From: "Mark Beito" <mbei...@sleepyeyetel.net>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Wednesday, October 26, 2016 10:35:17 PM
Subject: Re: O
Good evening:
We have a woodshop that is part of our funeral supply business. We have
three FT people making urns, flag cases, easels, crosses and crucifixes,
and other wood products that are sold to funeral homes across the U.S.
One of our pieces of equipment is a Model 900 Legacy Ornamental
You've been updated. Thanks!
- Original Message -
From: Steve Jacobs
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, March 28, 2016 10:51 AM
Subject: Re: Ornamental Mills Around the World
Tim,
I still have the Revolution and 900 CNC. I read a lot
is that correct?
>
> -Tim
>
> - Original Message -
> From: 'Stan Eichelberger' via Legacy Ornamental Mills
> To: Legacy Ornamental Mills
> Sent: Sunday, March 27, 2016 7:43 AM
> Subject: Re: Ornamental Mills Around the World
>
>
> Stan Eichelberger
> Gree
Added, If I recall, you had a model 900, is that correct?
-Tim
- Original Message -
From: 'Stan Eichelberger' via Legacy Ornamental Mills
To: Legacy Ornamental Mills
Sent: Sunday, March 27, 2016 7:43 AM
Subject: Re: Ornamental Mills Around the World
Stan Eichelberger
Stan Eichelberger
Greenwich OhioOn Sunday, July 7, 2013 at 4:54:45 PM UTC-4, Tim wrote:
>
> Legacy 900I accidentally deleted this thread when I was trying to remove
> all the off topic messages in the thread.
>
> We have a hidden group map that shows where the owners of Legacy
> Ornamental
March 26, 2016 4:47 AM
> *Subject:* Re: Ornamental Mills Around the World
>
> Lou Lossi
> Winchester, VA
>
> Legacy 1500 EX and Legacy 800
>
> On Sunday, July 7, 2013 at 4:54:45 PM UTC-4, Tim wrote:
>>
>> I accidentally deleted this thread when I was trying to
Subject: Re: Ornamental Mills Around the World
Lou Lossi
Winchester, VA
Legacy 1500 EX and Legacy 800
On Sunday, July 7, 2013 at 4:54:45 PM UTC-4, Tim wrote:
I accidentally deleted this thread when I was trying to remove all the off
topic messages in the thread.
We have
Lou Lossi
Winchester, VA
Legacy 1500 EX and Legacy 800
On Sunday, July 7, 2013 at 4:54:45 PM UTC-4, Tim wrote:
>
> I accidentally deleted this thread when I was trying to remove all the off
> topic messages in the thread.
>
> We have a hidden group map that shows where the owners of Legacy
if anyone needs to find me, just ask Mac...he seems to follow my every
move!...LMAO!...other than that, joe biunno, legacy's "enterprise" model,
long island city, ny...and if anyone is ever visiting the big apple and
would like to visit the shop, just let me know at
>
--
Original Message -
> *From:* Michael Kratky <krat...@roadrunner.com>
> *To:* legacy-ornamental-mills@googlegroups.com
> *Sent:* Tuesday, March 22, 2016 7:20 AM
> *Subject:* RE: Ornamental Mills Around the World
>
> Michael Kratky
>
> Northville, NY 1213
2016 7:20 AM
> Subject: RE: Ornamental Mills Around the World
>
> Michael Kratky
> Northville, NY 12134
> LOM 1200
>
>
> From: legacy-ornamental-mills@googlegroups.com
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim
> Sent: Monday, March 21,
Added
- Original Message -
From: Michael Kratky
To: legacy-ornamental-mills@googlegroups.com
Sent: Tuesday, March 22, 2016 7:20 AM
Subject: RE: Ornamental Mills Around the World
Michael Kratky
Northville, NY 12134
LOM 1200
From: legacy-ornamental-mills
You've been addded.
- Original Message -
From: Arkady Paka
To: legacy-ornamental-mills@googlegroups.com
Sent: Tuesday, March 22, 2016 10:28 AM
Subject: Re: Ornamental Mills Around the World
Arkady Paka
Kharkiv, Ukraine
LOM 900
2016-03-22 17:57 GMT+02:00 'Gerald
..@roadrunner.com> wrote:
>
>
> Michael Kratky
> Northville, NY 12134
> LOM 1200
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim
> *Sent:* Monday, March 21, 2016 4:09 PM
> *To:* Legacy Ornamen
M 1200 From:
legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim
Sent: Monday, March 21, 2016 4:09 PM
To: Legacy Ornamental Mills
Subject: Re: Ornamental Mills Around the World I've made a little progress on
the members map.
Michael Kratky
Northville, NY 12134
LOM 1200
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim
Sent: Monday, March 21, 2016 4:09 PM
To: Legacy Ornamental Mills
Subject: Re: Ornamental Mills Around the World
I've made
2:18 PM
Subject: RE: Ornamental Mills Around the World
Great not sure how accurate you want to go but an aerial photo like google
maps have would be great if possible, I for one would love to see the towns
cities and country side round the world were all the members live it will
probably
-
From: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, March 21, 2016 2:18 PM
Subject: RE: Ornamental Mills Around the World
Great not sure how accurate you want to go but an aerial photo like google
maps have would be great if possible, I for one would love to see
Is it labeled that because it is two Model 1500's melded into one? (2 x 1500 = 3000) Mac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Mar 21, 2016 10:43 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Ornamental Mills Around the World
Legacy 3000 :-) I like it
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com]
Sent: Tuesday, 22 March 2016 11:05 AM
To: Legacy Ornamental Mills
Subject: Re: Ornamental Mills Around the World
all right, all you wise guys out in legacy
all right, all you wise guys out in legacy land...to be honest,i think my
legacy "3000"(yes, i have given it it's own model number!) deserves it's
own zip code!...and like the saying goes, "go big, or go home!"...LOL!
--
You received this message because you are subscribed to the Google
I'm not adding anyone without permission, but you're right, It should be a huge
pin!
- Original Message -
From: MWF
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, March 21, 2016 2:24 PM
Subject: Re: Ornamental Mills Around the World
Be sure to get "N
From:
Bill
Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, March 21, 2016 1:51
PM
Subject: RE: Ornamental Mills Around the
World
I didn’t think that
map was working any more
Did you fix it
Tim
Bill
From: legacy-ornamental-mills
Added, thanks!
- Original Message -
From: Barry Clarke
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, March 21, 2016 2:13 PM
Subject: Re: Ornamental Mills Around the World
Barry Clarke l own a legacy 900 mill and l’m located in Brantford Ontario
,Canada
win the lotto :-)
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Tuesday, 22 March 2016 10:06 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Ornamental Mills Around the World
I'm
s@googlegroups.com
> Sent: Monday, March 21, 2016 1:51 PM
> Subject: RE: Ornamental Mills Around the World
>
>
> I didn’t think that map was working any more
> Did you fix it Tim
>
> Bill
>
>
> From: legacy-ornamental-mills@googlegroups.com
> [mail
I'm working on building my own version.
- Original Message -
From: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, March 21, 2016 1:51 PM
Subject: RE: Ornamental Mills Around the World
I didn’t think that map was working any more
Did you
I didn’t think that map was working any more
Did you fix it Tim
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim
Sent: Tuesday, 22 March 2016 7:09 AM
To: Legacy Ornamental Mills
Subject: Re: Ornamental Mills
Okay, you have been added. You are communicating through the group right now.
- Original Message -
From: MAX LATHAM
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, March 21, 2016 12:43 PM
Subject: RE: Ornamental Mills Around the World
OK, Max Latham (MD-ya
al-mills@googlegroups.com
Subject: Re: Ornamental Mills Around the World
I've made a little progress on the members map.
http://ornamentalmills.com/map/usermap.html . You can now see the map of
members that have added themselves in the past. If you would like to be added
to the map, please leave a
I've made a little progress on the members map.
http://ornamentalmills.com/map/usermap.html . You can now see the map of
members that have added themselves in the past. If you would like to be
added to the map, please leave a message in this area stating your name
that you would like
-mills@googlegroups.com
Subject: RE: Ornamental Mills Around the World
Thats a shame it was nice too see where every one on the group was i hope
we can find another
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf
Well,
It looks like the map feature us unofficially dead. I cannot get a hold of
the developer. His email does not bounce, but he has not replied to my
inquiries. There is no way at this time to recover the data. I will look
for a replacement service or code to generate our own map that
@googlegroups.com
Subject: Re: Ornamental Mills Around the World
Well,
It looks like the map feature us unofficially dead. I cannot get a hold of the
developer. His email does not bounce, but he has not replied to my inquiries.
There is no way at this time to recover the data. I will look
replacement.Mac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Sep 25, 2014 6:07 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Ornamental Mills Around the World
<zzz!--[if gte="" mso="" 9]="">
<zzz![endif]-->&
Tried to do anything with the map but it was a no-go. sorry
On Sunday, July 7, 2013 4:54:45 PM UTC-4, Tim wrote:
I accidentally deleted this thread when I was trying to remove all the off
topic messages in the thread.
We have a hidden group map that shows where the owners of Legacy
@googlegroups.com
Sent: Saturday, September 06, 2014 5:21 PM
Subject: Re: Ornamental Mills Around the World
Tried to do anything with the map but it was a no-go. sorry
On Sunday, July 7, 2013 4:54:45 PM UTC-4, Tim wrote:
I accidentally deleted this thread when I was trying to remove all the off
Hello All,
Bruce Larson has added a marker to our guestmap.
Marker message: New Braunfels 900
Another Texas wood worker that has recently joined.
-Tim
.
On Sunday, July 7, 2013 1:54:45 PM UTC-7, Tim wrote:
I accidentally deleted this thread when I was trying to remove all the off
topic
: Saturday, April 26, 2014 6:58 AM
Subject: Re: Ornamental Mills Around the World
Morning Tim
With all due respect to privacy. Is there a member list available? If
this is a no no I understand. If not I would be interested in 'local'
members contacts, meaning central Calif. I only personally know
:-)
I'm just ahead of everyone else's time!
-Tim
- Original Message -
From: Milt Engelke mengel...@gmail.com
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, May 26, 2014 5:46 PM
Subject: Re: Ornamental Mills Around the World
Tim
Is your clock (date) off a bit. Iım still
the World
:-)
I'm just ahead of everyone else's time!
-Tim
- Original Message -
From: Milt Engelke mengel...@gmail.com
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, May 26, 2014 5:46 PM
Subject: Re: Ornamental Mills Around the World
Tim
Is your clock (date) off a bit. Iım still
Morning Tim
With all due respect to privacy. Is there a member list available? If
this is a no no I understand. If not I would be interested in 'local'
members contacts, meaning central Calif. I only personally know one
other owner, Marcus in San Jose Ca. and do not think he is a member.
Cheers
...@gmail.com
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, April 26, 2014 6:58 AM
Subject: Re: Ornamental Mills Around the World
Morning Tim
With all due respect to privacy. Is there a member list available? If
this is a no no I understand. If not I would be interested in 'local
Don Butler has added a marker to our guestmap.
Marker message: 1200XL (Extra Long)
-Tim
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Thomas Ellis has added a marker to our guestmap.
Marker message: Glouster 1200
I have no idea where Glouster is :-)
Also added
BillinGA has added a marker to our guestmap.
Marker message: 900-McDonough GA
Thanks for adding markers!
-Tim
--
You received this message because you are
According to Google Maps, Glouster is a city in Ohio - about 80 miles SE of Columbus.Mac-Original Message-
From: Tim Krause <artmarb...@comcast.net>
Sent: Feb 3, 2014 1:55 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Ornamental Mills Around the World
Thomas
regarding expected
ship date?
Mill safely!
Mac
--
--
-Original Message-
From: Bill Bulkeley
Sent: Sep 6, 2013 5:31 PM
To: legacy-orna...@googlegroups.com javascript:
Subject: RE: Ornamental Mills Around the World
I
...@earthlink.net
Subject: Re: Ornamental Mills Around the World
Hi Mac,
I did place an order with Chris around the first part of September. Both he
and Cindy advised that it would be 4-6 weeks to build and another week to
ship to Alaska (and then whatever it takes for the sleddogs to get
Tom Dotta has added a marker to our guestmap.
Marker message: 900 1000?
-Tim
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
September 2013 8:20 AM
To: legacy-ornamental-mills
Subject: Re: Ornamental Mills Around the World
Bill,
I felt your remark was a bit harsh. I am sure legacy will honor their side
of the deal, besides they announced it publicly, so it would not do their
reputation any good if they rescind
)
Subject: Re: Ornamental Mills Around the World
Tim, I thought you were getting the first evolution?
Jeff Becker
Tim Krause wrote:
Dan Healey has added a marker to our guestmap.
Marker message: Evolution
All the way up in Alaska!
-Tim
--
You received this message because you
, 2013 6:27 AM
Subject: Re: Ornamental Mills Around the World
Hello Jeff
Legacy said that thay would give him A evolution, I dont think there was
any number attached. Im sure if someone was going to offer to pay for one,
Legacy would rather sell it before giving one away. (After all its only
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Ornamental Mills Around the World
Hello Jeff
Legacy said that thay would give him A evolution, I dont think there was
any number attached. Im sure if someone was going to offer to pay for one,
Legacy would rather sell it before giving one
11:27 PM
*To:* legacy-ornamental-mills@googlegroups.com
*Subject:* Re: Ornamental Mills Around the World
** **
Hello Jeff
Legacy said that thay would give him A evolution, I dont think there
was any number attached. Im sure if someone was going to offer to pay for
one, Legacy would
Tim
I think you should be voted in for Sainthood.
Patience is a virtue. ;-)
C.A.G.
- Original Message -
From: Tim Krause
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, September 06, 2013 2:26 PM
Subject: Re: Ornamental Mills Around the World
The limit is 36
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Sep 6, 2013 5:31 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Ornamental Mills Around the World
<zzz!--[if !mso]=""><zzz![endif]--><zzz!--[if gte="" mso="" 9]="">
Dan Healey has added a marker to our guestmap.
Marker message: Evolution
All the way up in Alaska!
-Tim
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email
Krause
Sent: Friday, 6 September 2013 9:33 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Ornamental Mills Around the World
Dan Healey has added a marker to our guestmap.
Marker message: Evolution
All the way up in Alaska!
-Tim
_
No virus found
joe biunno has added a marker to our guestmap.
-Tim
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
LATHAM ma...@hotmail.com wrote:
Gred Walker? I visit Star Valley Ranch yearly and am interested in meeting
you.
Max Latham
Date: Sun, 7 Jul 2013 13:54:45 -0700
From: artmarb...@comcast.net
To: legacy-ornamental-mills@googlegroups.com
Subject: Ornamental Mills Around the World
I
I accidentally deleted this thread when I was trying to remove all the off
topic messages in the thread.
We have a hidden group map that shows where the owners of Legacy Ornamental
Mills are located around the World.
The map can be found here: http://ornamentalmills.com/map/usermap.html
It's a bout time Gary marked his spot on the map :-)!
Gary Moshofsky has added a marker to our guestmap.
Marker message: 1000EX
I know there are two other Oregonians and three Washingtonians that own
Legacy's equipment. What I don't know is how active any of them are. It's
been a while since I
I'm one of the Oregonians just sitting back(so to speak) trying to get into
retirement. Sure don't know when I had time to work. The best part is have have
two LOM's a 1200 with no updates but every accessory Legacy sold about 10 years
ago us several magnate bits and then recently I purchased
Meant to say NOT cover shipping cost.
Sent from my iPod touch
On Jun 20, 2013, at 3:10 PM, Milt mengel...@gmail.com wrote:
I'm one of the Oregonians just sitting back(so to speak) trying to get into
retirement. Sure don't know when I had time to work. The best part is have
have two LOM's
-0400 (EDT)
Subject: Re: Ornamental Mills Around the World
Marc has added a marker to our guestmap.
Marker message: 1000, Aurora CO
-Tim
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving
.
C.A.G.
- Original Message -
From: Tim artmarb...@comcast.net
To: Legacy Ornamental Mills legacy-ornamental-mills@googlegroups.com
Sent: Thu, 13 Jun 2013 12:53:15 -0400 (EDT)
Subject: Re: Ornamental Mills Around the World
Marc has added a marker to our guestmap.
Marker message: 1000
: Ornamental Mills Around the World
i think you are thinking about Alaska and the Aurora borealis.( I
think I spelled that right)
On Thu, Jun 13, 2013 at 2:12 PM, CURTIS GEORGE curtgeo...@wowway.com
wrote:
Hay, isnt that where those lights come from, That you see in the sky,late
at
night ? ;-p
Glad
I added mine! I'm in Eastern Washington stateif anyone wants to play.
--
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
oglegroups.com
Subject: Re: Ornamental Mills Around the World
Good Morning Tim and the rest of
the group.
Thanks for the "tease"
to get me started with making a post or two. It's not that I have been too shy
to post anything I have been a bit overwhelmed with the Aspire software and
Mach3
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews
Sent: Friday, 5 April 2013 11:46 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Ornamental Mills Around the World
You problably could with the right bit. You also could use a core box bit to
make a grove and fold
: RE: Ornamental Mills Around the World
I think it would be easiest to drill it in the wood lathe first then
transfer to the mill for the rest
But after saying that anything is possible on a legacy mill
if you have a Morse taper in the mills tailstock and you motorize the head
stock (I have done
That a great idea I plan to use when working with two different kind of
wood. Occasionally I will get a request to make a call combining Cocobolo
and Osage Orange. It does make a unique call and gives the user the best of
both woods. Thanks for the information!
On Friday, April 5, 2013
Good Morning Tim and the rest of the group.
Thanks for the tease to get me started with making a post or two. It's
not that I have been too shy to post anything I have been a bit overwhelmed
with the Aspire software and Mach3 software that I need to learn to use
prior to playing with the
Good Morning Tim and the rest of the group.
Thanks for the tease to get me started with making a post or two. It's
not that I have been too shy to post anything I have been a bit overwhelmed
with the Aspire software and Mach3 software that I need to learn to use
prior to playing with the new
You problably could with the right bit. You also could use a core box bit
to make a grove and fold it together, they made a flute like that in one of
the videos.
On Apr 5, 2013 8:19 AM, Jerry's Custom Calls jast...@spp.org wrote:
Good Morning Tim and the rest of the group.**
** **
Thanks
1 - 100 of 134 matches
Mail list logo