Sorry about that. I noticed the problem right away/
- Original Message -
From: mwfos...@earthlink.net
To: legacy-ornamental-mills@googlegroups.com
Sent: Sunday, June 08, 2014 9:55 AM
Subject: Re: indexing accessory completed
Whew! Thank you! I guess I should have read
Whew! Thank you! I guess I should have read THIS one first. You have cleared it up.Thanks.Mac-Original Message-
From: Tim Krause
Sent: Jun 8, 2014 8:02 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: indexing accessory completed
I attached the wrong file. This one
rom: Tim Krause
Sent: Jun 8, 2014 7:57 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: indexing accessory completed
I've got an attachment of an interesting index plate used in the 1920's for
indexing 1,2,3,4,5 starts on a piece. I'm wondering how error free
tim,
looks good to me...i had an easy time modifying my killinger plates
for off numbered indexes...there were the 24 index holes around the outer
perimeter that came with the machine...i was able to drill two inner
circles of holes for additional indexing...and since i had purchased 3
ma
I attached the wrong file. This one is correct.
-Tim
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegrou
I've got an attachment of an interesting index plate used in the 1920's for
indexing 1,2,3,4,5 starts on a piece. I'm wondering how error free does it
look?
This is used like the killinger lathe Joe showed at the front of this thread.
The holes are numbered for the indexes. I think I see a
: Re: indexing accessory completed
Mike,
You will always be known to me as Lil Twisted, but I'd grant you the
title of Sir Twists-A-Lot if it was up to me :-)
I've been looking at your example and the first thing that comes to
mind is there is no 3.75" pitch with the newer Legacy m
m>
*Sent:* Monday, June 02, 2014 4:48 PM
*Subject:* Re: indexing accessory completed
I like where this thread has developed. The flexibility of
degrees on the positioning of the stock is awesome!
Where to start.
First of all the crank handle indexing is only for straight
mi
.
- Original Message -
From: Tim Krause
To: legacy-ornamental-mills@googlegroups.com
Sent: Tue, 03 Jun 2014 06:40:42 -0400 (EDT)
Subject: Re: indexing accessory completed
Mike,
You will always be known to me as Lil Twisted, but I'd grant you the title of
Sir Twists-A-Lot if it was up
- Original Message -
> *From:* 'joe biunno' via Legacy Ornamental Mills
> *To:* legacy-orna...@googlegroups.com
> *Sent:* Tuesday, June 03, 2014 5:21 AM
> *Subject:* Re: indexing accessory completed
>
> well, i'm impressed how a potential problem was so
7; via Legacy Ornamental Mills
To: legacy-ornamental-mills@googlegroups.com
Sent: Tuesday, June 03, 2014 5:21 AM
Subject: Re: indexing accessory completed
well, i'm impressed how a potential problem was solved with a bit of math and
ingenuity...i'll admit that i am having trouble
get an equal
> pattern all the way around. I could answer my own question by doing your
> instructions but you must know off the top of your head.
>
> -Tim
>
> - Original Message -
>
> *From:* Okla Mike (Liltwisted)
> *To:* legacy-orna...@googlegroups.com
ls@googlegroups.com
Sent: Monday, June 02, 2014 4:48 PM
Subject: Re: indexing accessory completed
I like where this thread has developed. The flexibility of degrees on the
positioning of the stock is awesome!
Where to start.
First of all the crank handle indexing is only for straight mi
@googlegroups.com
Cc: nokiia...@msn.com
Subject: Re: indexing accessory completed
curtis...do not want to sound like a broken record myself...i did see the
videos and mike's technique is a great time saver, but it cannot do odd ball
divisions...great for 2,4,8, 12 or 16...cannot do 3,5,6,7
back up, showing some pictures and try to
> make it simple and clear.
>
> -Tim
>
>
> - Original Message -
> *From:* 'joe biunno' via Legacy Ornamental Mills
> *To:* legacy-orna...@googlegroups.com
> *Sent:* Thursday, May 29, 2014 10:44 AM
> *
lto:legacy-ornamental-mills@googlegroups.com>
*To:* legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com>
*Sent:* Thursday, May 29, 2014 10:44 AM
*Subject:* Re: indexing accessory completed
okay, i must be missing something here.
- Original Message -
From: 'joe biunno' via Legacy Ornamental Mills
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 29, 2014 10:44 AM
Subject: Re: indexing accessory completed
okay, i must be missing something here...is everyone assuming that to
math method for odd balls. I'll post it
> under a new message.
>
> -Tim
>
>
> - Original Message -
> *From:* 'joe biunno' via Legacy Ornamental Mills
> *To:* legacy-orna...@googlegroups.com
> *Cc:* noki...@msn.com
> *Sent:* Thursda
From: 'joe biunno' via Legacy Ornamental Mills
To: legacy-ornamental-mills@googlegroups.com
Cc: nokiia...@msn.com
Sent: Thursday, May 29, 2014 5:24 AM
Subject: Re: indexing accessory completed
curtis...do not want to sound like a broken record myself...i did see the
videos an
gacy-orna...@googlegroups.com
> Sent: Thu, 29 May 2014 05:34:32 -0400 (EDT)
> Subject: Re: indexing accessory completed
>
> tim...the reason i am not using the plates i showed a photo of previously
> is those plates are from the other twist machine(the killinger) i have been
> using
ntal Mills
To: legacy-ornamental-mills@googlegroups.com
Sent: Thu, 29 May 2014 05:34:32 -0400 (EDT)
Subject: Re: indexing accessory completed
tim...the reason i am not using the plates i showed a photo of previously is
those plates are from the other twist machine(the killinger) i have been
u are going to use this. I might have some suggestions, but most
> have been written in the group already.
>
> -Tim
>
>
> - Original Message -
> *From:* 'joe biunno' via Legacy Ornamental Mills
> *To:* legacy-orna...@googlegroups.com
> *Sent:* Tuesday,
, but most have been written
in the group already.
-Tim
- Original Message -
From: 'joe biunno' via Legacy Ornamental Mills
To: legacy-ornamental-mills@googlegroups.com
Sent: Tuesday, May 27, 2014 2:11 PM
Subject: Re: indexing accessory completed
one more tweak t
Hello Joe.
Nice job on that indexer. If you like I have a machine shop/supply house where
I but #2 mt shafts, thay sell three different styles Here is the link.
(http://kittstools.securesites.net/store/drill_chuck_arbors.html ( and this is
the link to the chuck adaptors. ) For a few bucks and a
one more tweak to this set up...need to cut off,grind/shape and re weld
that flat lever, so it follows the curvature of the indexing base and then
will not interfere with the y-axis router carriage
On Tuesday, May 27, 2014 4:01:27 PM UTC-4, joe biunno wrote:
>
> completed the indexer...not too m
25 matches
Mail list logo