As all the world must know by now, identical source citations created with
some SourceWriter templates repeat in Descendant Book Reports for each time
they're used--and with a different footnote number each time. Further, I'm
finding that repetitions appear in the report preview when they're
Hello Kirsten - A work-around is to create the Descendant Report in .rtf
format and also in .txt format. Open them both in Word by clicking on
Windows and then Arrange. The endnotes are correct in the .txt version.
Manually change each source reference in the .rtf (which I convert to .doc
I would also like Robert's comments, since I am considering the same thing.
Elizabeth C
Valerie Garton wrote:
Robert could you please respond to me as well as I have the same
deliberation ?
Regards from Valerie in sunny Sydney.
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast,
Thanks for your reply Gary.
My concern when making a backup was that V7 would be able to get to them and
change them.
Are you telling me that the backups will not be affected after 7 is added ?
Regards from Valerie in sunny Sydney.
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast,
Valerie,
Back ups made by version 6 will not be changed by version 7, unless you
overwrite them with a back up of a Version 7 file. The .fdb files are changed
so after viewing them in V7. so do not back them up using the same name as an
exisiting back up.
Ron Ferguson
Thanks Ron and also for the tip of a different name.
Regards from Valerie in sunny Sydney.
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow
Wexford
Guild of One-Name Studies No: 4825 for CULLODEN HIGGINSON
-Original Message-
From: [EMAIL PROTECTED]
Robert, I would also like to see your thoughts and comments, I am also
sitting in the go now or wait camp.
Thanks,
Alan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
Cunningham
Sent: 26 July 2008 12:54
To:
Janis,
Just a quick look at my grandfather's Individual report as well as
Chronology report and here's what I find: There are sources for my
father that appear on my grandfather's Chronology report, but they are
appropriately cited to my father's events. The individual report does
not include
To Ron and everyone else who helped me with this,
Thanks for the advice. That's is pretty much how I was trying to enter these
places. However, I was using the Addresses for places like the cemeteries,
living people, churches, etc., in the event I need to contact them for some
reason. Even
Robert, please send me your comments, too, if you have time.
Elsie
- Original Message -
From: Alan [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Saturday, July 26, 2008 7:56 AM
Subject: RE: [LegacyUG] To Upgrade or not - going from Ver 6 to Ver 7
Robert, I would
I'm a new member of this group and have been using legacy since V5 but only
recently been able to concentrate significant time to genealogy. I'm currently
using V7 deluxe edition. This thread subject has also puzzled me lately as I
have been gathering more address information from various
Roxanne,
Make sure you don't have a firewall blocking Legacy's access to the search
sites.
Thanks for using Legacy.
Sherry
Customer Support
Millennia Corporation
[EMAIL PROTECTED]
http://www.LegacyFamilyTree.com
We are changing the world of genealogy!
When replying to this message, please
Recreate the report, click on Preview and in that window, note the options
to print current page.
Thanks for using Legacy.
Sherry
Customer Support
Millennia Corporation
[EMAIL PROTECTED]
http://www.LegacyFamilyTree.com
We are changing the world of genealogy!
When replying to this message,
I have just discovered another individual with a mistaken source attached to
every event. This is definitely not an instance of hitting the triple bar
instead of the single. The source attached is from an entirely unrelated
line; it is a new Source Writer source, which I created just yesterday
I know Legacy verifies counties, but what about Independent Cities, like
Richmond or Falls Church, VA? I can find them in the Geo-code list, but
doesn't seem to verify formation date with event date. For verification, I'm
having to switch back and forth between AniMap and Legacy. Or am I missing
I'm making a family calendar and have been unable to print the suffixes
to distinguish Sr.'s from Jr.'s from III's. Can this be done?
Thanks, Richard
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
Ruth:
Thanks for the idea about comparing the txt and rtf reports. 4,000 pages??
My heart bleeds for you! I've only edited a couple of reports and it nearly
made me crazy.
And thanks for the warning about the missing text. I would expect that it's
missing from the rtf rather than the txt, but
Tom:
I posted the initial question. After reading all the responses and
trying lots of ways, for the reasons you cited (mapping, showing on
all reports, can print 1 report showing all addresses, etc.), I am
now entering the street # and street name in the Place
field. Here's how I'm doing
Re the splash screen for Research Guidance. I am afraid it might be a
necessary evil. When we select Research Guidance, Legacy needs a
momentary break to 'examine' the current person and examine sources
you have already made use of, examine any to-do items for that
person. I think Millennia
You are correct - it's missing from the rtf, not the txt. Do you know why?
Ruth
- Original Message -
From: Kirsten Bowman [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Saturday, July 26, 2008 11:00 AM
Subject: RE: [LegacyUG] 7.0.0.55 Source Repetition Workaround?
In the assigned sources before SourceWriter to see the sources File ID # I
could click on Show Entire Source to see the File ID #.
If I use SourceWriter this no longer works, I have to click on Edit Source
or Edit Detail to see the File ID #. Write the # down, then click close.
It seems to me
As a *general* rule with ANY software update that changes the data
structure, the programmers typically make a way to either read or convert
data made in an earlier version. (Note that MS Word reads all it's old
versions) Most of the time a window will pop up telling you the file will
need to
In the marriage screen, where goes the marriage screen. I would like it
to read: Holy Trinity Church, New Albany, Floyd County, Indiana. How
can I get it done, please?
Jane Sarles
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
I used the show attached address information to add the name of a
cemetery, but it did not appear in either the individual report or the
descendant report.
Jane Sarles
Cathy Vallevieni wrote:
Tom:
I posted the initial question. After reading all the responses and
trying lots of ways, for
May I ask, where in the family screen do you add the street# and
name? I do not see a place to do so.
Jane Sarles
Cathy Vallevieni wrote:
Tom:
I posted the initial question. After reading all the responses and
trying lots of ways, for the reasons you cited (mapping, showing on
all
I wish they could find another way there to 'do something' that doesn't
lock up the main navigation from being used in split screen view.
JL
JLog - simple computer technology for genealogists
http://www3.telus.net/Jgen/jlog.html
Robert Carneal wrote:
Re the splash screen for Research
Ruth:
As I mentioned earlier, I suspect there is a glitch (or multiple glitches)
between Legacy and Word. That's the only thing I can figure out, but I sure
hope it gets fixed soon. Legacy and I are becoming the laughingstock of my
research group and I'm getting royally sick of it, aside from
Have you looked at the instructions?
On Tue, Aug 26, 2008 at 12:59 PM, Jane Sarles [EMAIL PROTECTED]wrote:
May I ask, where in the family screen do you add the street# and name? I
do not see a place to do so.
Jane Sarles
Cathy Vallevieni wrote:
Tom:
I posted the initial question.
I just had a look at the Address Label report and see that you can choose
- Mailing addresses
- Event addresses
- Repository addresses
or any combination
Further, if you select Mailing addresses there are tick boxes to refine this
selection to
- Newsletter
- Fam Association
- Birthday
- Research
-
Jane:
When entering or editing an individual's information on the
Individual's Information screen below name, Title Pre. and Title
Suf., in the Location field where normally everyone just enters the
city, county, state, country. I.E. Born has two fields (date and
in _ _);
Jane:
Right, wrong or otherwise, I also put the name of the cemetery in the
same place I'm putting the the street # and name (I don't also put
the street # and name if I put the cemetery name). Mapping shows the
Cemetery locations without you putting the exact address (at least
for the ones
Jane:
I assume you are trying to add it in a way that it will Map, show on
all the reports, etc.? If so, just adding the church name won't get
it to Map. You would have to add the street address for the
church. If you just want to add it per your example below, then
enter it using the
Jane Sarles wrote
In the marriage screen, where goes the marriage screen. I would like
it to read: Holy Trinity Church, New Albany, Floyd County, Indiana.
How can I get it done, please?
As with every other Event, you can either enter it in the Place
(Location) field, exactly as you've
I need to clear up some entries and hope to clean up some of my location
fields.
Ideally I'd like then to to use the new Virtual Earth to get as exact of
a GPS location as possible depending on the information I've entered.
In the past most of my addresses were entered
City, County, State,
Robert,
Please send your comments to the list so we can put an end to the me too
posts.
--
Ron Bernier
- Start Original Message -
Sent: Sat, 26 Jul 2008 09:36:56 -0400
From: Elsie Saar [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] To Upgrade or not
When I restored an old file, from L4 to L5 (I think),
it did warn me, which reasured me that my losses were
less than expected.
Rich in LA CA
--- Gary Templeman [EMAIL PROTECTED] wrote:
As a *general* rule with ANY software update that
changes the data
structure, the programmers typically
I noticed in Calendar Creator Options the check boxes
are missing for Suffix and Prefix, obviously an
oversight (IMHO)?
Rich in LA CA
--- Richard Almarode [EMAIL PROTECTED] wrote:
I'm making a family calendar and have been unable to
print the suffixes
to distinguish Sr.'s from Jr.'s from
New After I load my ftm11 gencom into Legacy 7.0 ( I have vista
Premium) all seem to load ok listed all in name list of each 12,648 people
but when I go to family view only a few generation shows when I have 16
generation in my fathers surnames only goes to my grandfather and his
Parents
Have you tried the 4 steps under file maintenance? Good idea - especially
with a new import from FTM.
- Original Message -
From: pkrk1
To: LegacyUserGroup@legacyfamilytree.com
Sent: Saturday, July 26, 2008 4:10 PM
Subject: [LegacyUG] Problem New ---at start up after loading
No I haven't but will I did print out and go though any in the potential
problem report and cleared them up. RK
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Judy
Sent: Saturday, July 26, 2008 4:27 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject:
Thanks I will do that RK
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Judy
Sent: Saturday, July 26, 2008 4:27 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] Problem New ---at start up after loading Gencomfrom
FTm v 11
Have you
I located a specific address on Virtual Earth (came with Legacy 7.0
Deluxe Edition). When I tried to edit the current general city
location in Legacy from a general Longitude/Latitude for the city to
a specific Longitude/Latitude for the address, Legacy gave me an
error message The number
I'll vote for that.
JL
JLog - simple computer technology for genealogists
http://www3.telus.net/Jgen/jlog.html
Ann Parsons wrote:
In the assigned sources before SourceWriter to see the sources File ID # I
could click on Show Entire Source to see the File ID #.
If I use SourceWriter this no
You need to convert the decimal bits to minutes and seconds. Go to the
Master Location and click on the little calculator. You can convert the
decimal bits to minutes and seconds there.
Basically you take the decimal part of the long or lat and multiply by 60.
The whole number bit becomes the
I put an incorrect number in my last e-mail. Here's the correct information:
I located a specific address on Virtual Earth (came with Legacy 7.0
Deluxe Edition). When I tried to edit the current general city
location in Legacy from a general Longitude/Latitude for the city to
a specific
Cathy,
I tried it and it does work. So simple, yet never occurred to me.
Thanks for the detailed instructions. That's what it takes for me.
Jane
Cathy Vallevieni wrote:
Jane:
When entering or editing an individual's information on the
Individual's Information screen below name, Title
The VE data is in degrees and decimal degrees.
FL Rose
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Cathy
Vallevieni
Sent: Saturday, July 26, 2008 5:41 PM
To: LegacyUserGroup@LegacyFamilyTree.com
Subject: [LegacyUG] Longitude and Latitude--Legacy vs Virtual
Perhaps the Legacy folks haven't noticed how the file ID # has been
affected. Maybe they will see these messages and being the clever folks they
are change back to how it was in v6.
- Original Message -
From: Cary [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent:
Thanks, Sherry; no firewall though. My Legacy search used to work. Don't know
what is different.
Roxanne Baird
--- On Sat, 7/26/08, Sherry/Support [EMAIL PROTECTED] wrote:
From: Sherry/Support [EMAIL PROTECTED]
Subject: RE: [LegacyUG] Error 53
To: LegacyUserGroup@legacyfamilytree.com
Date:
Is it with one specific search or all of them?
Which browser are you using? You may need to set the browser at Options
Customize Launch, under the alternate browser section.
Thanks for using Legacy.
Sherry
Customer Support
Millennia Corporation
[EMAIL PROTECTED]
50 matches
Mail list logo