John Gregson wrote:
O.K.; guess I understand that; but I did a lot of editing on this one
source, and also saved the results
It would seem to me that if you use an original source, and in this case
all of my data was imported using GEDCOM, followed by two days of
'playing around' and saving
: Thursday, June 19, 2008 2:44 AM
Subject: Re: [LegacyUG] Source conversion
John Gregson wrote:
O.K.; guess I understand that; but I did a lot of editing on this
one source, and also saved the results
It would seem to me that if you use an original source, and in this
case all of my data
Thanks Geoff, this is very helpful.
Barb Krecklow
- Original Message -
From: Geoff Rasmussen [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Wednesday, June 18, 2008 9:38 AM
Subject: [LegacyUG] Source conversion
As we know, the Source Conversion tool is not yet
Of Dede Holden
Sent: Wednesday, June 18, 2008 1:39 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] Source conversion
Geoff,
When you follow this procedure, do your reports generate the results
you want? Here is the problem I have had with the new Source Writer.
The Master Source
Hello Geoff.
Thanks for these instructions; but I've run into a wee problem.
In Para 1), below, you state:
...The SourceWriter style citations have a small
black bullet at the beginning in the Source List Name column.
Well, I don't see that bullet?
I have checked the Options/source and
]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Wednesday, June 18, 2008 4:28 PM
Subject: RE: [LegacyUG] Source conversion
This bullet is found next to a new source created by the new source
writer
only. Your old sources will remain the same, only the new sources
will have
this little black bullet (shows
Just in case there's some other poor stupid soul out there who's as slow on
the uptake as I am:
When Geoff says copy/paste in Step 2, he means you to use Control-C to
copy. blush/grin I spent several minutes trying various combinations of
RC and Alt-RC etc. before the obvious drifted into my
]
[mailto:[EMAIL PROTECTED] On Behalf Of Penny
Sent: Wednesday, June 18, 2008 5:07 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] Source conversion
I have expanded on Geoff's method a bit; but only in that I want to be sure
I converted the citations on everybody using a given
@legacyfamilytree.com
Sent: Wednesday, June 18, 2008 8:19 PM
Subject: RE: [LegacyUG] Source conversion
Penny,
Exactly what I've been doing too. Tagging everyone using the source, then
untagging as I go. I guess I left that part off. Thanks for your input.
Thanks,
Geoff Rasmussen
Millennia Corporation
[EMAIL
Hi Michelle,
I seem to remember reading that Legacy are not making any promises as to
when this will be available. I reckon this is sensible really, in case they
have to break the promise.
Best wishes
David
*
David S Brookes
Musical
, 2008 6:55:17 AM
Subject: RE: [LegacyUG] Source Conversion Tool?
Hi Michelle,
I seem to remember reading that Legacy are not making any promises as to
when this will be available. I reckon this is sensible really, in case they
have to break the promise.
Best wishes
David
Kirsten Bowman wrote
Reading about the problems people are having with converting sources
has caused me to postpone upgrading to v.7, so I have no direct
experience with the process but . . . wouldn't it be convenient if we
could copy an existing source to the Source Clipboard and keep that
Kirsten, don't put off upgrading to v7 just because you might not be using
the source templates. The older sources work just fine - you can wait to use
the templates until things have settled down a bit if that is your choice.
In the meantime there are other improvements with v7 that are mighty
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] Source Conversion Tool
Attention EVERYBODY!!
##
T H ES O U R C E C O N V E R S I O NT O O L I S N O T
A V A I L A B L EY E T
Attention EVERYBODY!!
##
T H ES O U R C E C O N V E R S I O NT O O L I S N O T
A V A I L A B L EY E T
##
Doesn't anyone read previous messages before
wrote
Is this the Source Conversion Tool avaiable yet? It does not appear
under View - Master Lists - Sources - Options as stated in the Help
section. Am I missing something?
Yes, you're missing checking the Archives for this list, where you would
have found that this question has been
16 matches
Mail list logo
