Love it
On 2/23/12 8:13 PM, "Shane G" wrote:
> I must admit some ambivalence to being hamstrung by such "standards".
> I did enjoy having a read of this:
> http://lists.busybox.net/pipermail/busybox/2010-December/074114.html
-
Yet another product that doesn't follow it :)
Although the Tivoli products are way worse!
Believe it or not, I have seen a few that do follow it.
Marcy
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Michael
MacIsaac
Sent: Thursday, February
I failed to say in my post to make sure wherever you choose to put those logs
and dumps of WAS, make sure it is on its own file system so that only WAS dies
when it fills and not say your security product that also needs /var, making it
a bit of a challenge for the people that need to clean it t
I must admit some ambivalence to being hamstrung by such "standards".
I did enjoy having a read of this:
http://lists.busybox.net/pipermail/busybox/2010-December/074114.html
Shane ...
> > ...
> > The default in /opt/IBM is not a great option.
> Per the FHS, I believe it should have been (should
On Thu, 23 Feb 2012 09:43:14 -0600, Mark Workman
wrote:
> What are recommended LVM mount points for a Linux guest? I currently
use
> /opt for my WebSphere installations, but occasionally fill up /.
I generally use seperate partitions for:
/
/boot
/home
/tmp
/usr
/var
...on any server system.
My personal experience:
I had a client using Oracle on Intel (a 16GB RAM, multicore Dell server),
and they had a couple queries they had to run every day, at the end of the
day. The job was taking 29 minutes. They exported the database, imported on
a Linux on Z, same 16GB, same number of virtual pr
> -Original Message-
> From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of
> Mark Post
> I usually build systems that look like this:
> # df -h
> FilesystemSize Used Avail Use% Mounted on
> /dev/dasda1 388M 234M 134M 64% /
> /dev/mapper/vg01-home
We set our systems up as follows:
ts00086@rpndvm01 ~ $ df -h
FilesystemSize Used Avail Use% Mounted on
/dev/mapper/vg_system-lv_root
3.9G 3.6G 178M 96% /
/dev/mapper/vg_system-lv_var
3.0G 748M 2.1G 27% /var
/dev/mapper/vg_local-lv_opt
Issue resolved, I did not have the xserver installed on windows. Thank you very
much!
Matt
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Gregg
Levine
Sent: Thursday, February 23, 2012 10:28 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: X11 Error
>>> On 2/23/2012 at 10:43 AM, Mark Workman
>>> wrote:
> What are recommended LVM mount points for a Linux guest? I currently use
> /opt for my WebSphere installations, but occasionally fill up /.
I usually build systems that look like this:
# df -h
FilesystemSize Used Avail Use% M
> ...
> The default in /opt/IBM is not a great option.
Per the FHS, I believe it should have been (should be) /var/opt/IBM/.
"Mike MacIsaac"(845) 433-7061
--
For LINUX-390 subscribe / signoff / archive access instructions,
se
Another silly question: Did you install the X server? It is optional. If you
did, have you restarted Windows since the installation? On my WinXP system, the
X server is automagically started when I boot. I don't remember doing anything
special to have this done for me.
--
John McKown
Systems E
We change /opt/IBM/WebSphere/AppServer/properties/wasprofile.properties to put
logs elsewhere (variable WS_CMT_LOG_HOME) and profiles elsewhere (variable
WS_PROFILE_REGISTRY and WS_WSPROFILE_DEFAULT_PROFILE_HOME) .
Put then somewhere like /var/was or /app/was or whatever your installation
stand
Likely lots of answers, but here's one flavor:
/var
/usr
/opt
/tmp
/home
Any directory that is prone to 'growth' is a likely candidate to be a
separate filesystem..
Scott Rohling
On Thu, Feb 23, 2012 at 7:43 AM, Mark Workman wrote:
> What are recommended LVM mount points for a Linux guest? I
Wow ... there is no quick answer for this.
Also, it doesn't matter if LVM is used or discrete disks (or
minidisks). Your question is actually just Unix FS management. LVM
does make enlargement easier.
Commonly, /var holds service content. WebSphere is one of those
packages which unfortunately d
Looks maybe X windows did not get installed as part of my cygwin install?
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of McKown,
John
Sent: Thursday, February 23, 2012 9:46 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: X11 Error
Silly question from
What are recommended LVM mount points for a Linux guest? I currently use
/opt for my WebSphere installations, but occasionally fill up /.
Thanks,
Mark Workman
Shelter Insurance Companies
573.214.4672
mwork...@shelterinsurance.com
This e-mail is intended only for its addressee and may contain in
Everything John said is spot-on. However, you can launch CYGWIN/X
without the system tray icon. I usually ran it that way: The goal
was "X is always there" and I liked having one less thingy in the
systray.
Used to do this all the time, Matt. But that was when I had to use
Windows as my primar
On Thu, Feb 23, 2012 at 10:16 AM, Dazzo, Matt wrote:
> I believe both Rich and John are correct in that Cygwin X server is NOT
> running on my Windows box. There is no X in the bottom right hand corner. So
> I tried starting it with command 'startxwin' and 'startx' and got command not
> found.
I believe both Rich and John are correct in that Cygwin X server is NOT running
on my Windows box. There is no X in the bottom right hand corner. So I tried
starting it with command 'startxwin' and 'startx' and got command not found.
When I launch Cygwin and enter 'printenv DISPLAY' I see no se
Mark,
The landscape of servers having this problem is SLES10. (And due to a number
of unfortunate events, still SP3). The latest event being... We put the .95
(SP4) kernel into the developers QA system that belongs to this landscape and
almost immediately ran into the ksoftirq problem. IBM h
Hello to everyone,
This e -mail is a request for people to chair sessions for a conference called
SHARE.
SHARE Inc. is an independent, volunteer run association providing enterprise
technology professionals with continuous education and training, valuable
professional networking and effective
> -Original Message-
> From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of
> Damian Gallagher
> I have worked on numerous migration projects, where we have taken the
> Win/*nix system with hundreds of GB of SGA, and run it on Linux on IBM
> zSeries with much less memory
Silly question from me, but do you have the Cygwin X server running on your
Windows box? On my Windows/XP, on the bottom right of the screen are a bunch of
icons. Once of which is a capital X in black with a red circle around the
middle. This tells me that the X server is working. On the Windows
Looks like you did not start the X server on the CYGWIN side. If you
had, it would have created the requisite content under /tmp.
-- R;
Rick Troth
Velocity Software
http://www.velocitysoftware.com/
On Thu, Feb 23, 2012 at 9:22 AM, Dazzo, Matt wrote:
> I installed cygwin on my windows XP work
I installed cygwin on my windows XP work station and connecting to RHEL5.6
server. I can sign on but get the following messages. This file
/tmp/.X11-unix/X0 does not existing my RHEL server or on windows cygwin /tmp.
Any help is appreciated. Thanks Matt
MATT@MATT ~
$ export DISPLAY=:0.0
MATT@
Thank you for confirming this. That will help in discussions when virtual
machines are involved.
Thanks, Berry.
> -Original Message-
> From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of
> Damian Gallagher
> Sent: woensdag 22 februari 2012 17:13
> To: LINUX-390@VM.MARIS
On Wed, Feb 22, 2012 at 10:22:57PM -0600, Ron Foster at Baldor-IS wrote:
> Hello listers,
> We are experiencing a problem where occasionally we get some uninterruptable
> processes that appear to hang.
> We use CPUPLUGD.
>
> The problem re-appeared whenever we moved workload around and caused some
28 matches
Mail list logo