Yes, I did both
mkinitrd
zipl
neither of which helped. The dasd_config was the answer.
On Mon, Mar 19, 2012 at 9:47 AM, Richard Troth
wrote:
> You probably need to re-stamp the initial RAM disk to know about the
> new drive. Barring other requirements, that would be ...
>
>mkinitrd
>
>>> On 3/19/2012 at 12:06 PM, Mark Post wrote:
> Which will probably fail, since you've already brought it online. (Which
> makes me think a "write the udev rules anyway" switch would be a nice
> enhancement request.)
I have to take that back. The "already online" message is simply informativ
>>> On 3/19/2012 at 09:36 AM, Mark Pace wrote:
> I'm having problems with the new disk I just added to an LVM group. When I
> reboot the system the new DASD is not online. So I have to do a chccwdev
> -e 0.0.0207 How do I make it come online automatically when I boot?
If you're talking about
Did you do a mkinitrd before you rebooted.
Sent from my iPhone
On Mar 19, 2012, at 8:44 AM, "Mark Pace" wrote:
> I'm having problems with the new disk I just added to an LVM group.
> When I
> reboot the system the new DASD is not online. So I have to do a
> chccwdev
> -e 0.0.0207 How do
Found it. Searched back through old posts and found the answer.
On Mon, Mar 19, 2012 at 9:36 AM, Mark Pace wrote:
> I'm having problems with the new disk I just added to an LVM group. When
> I reboot the system the new DASD is not online. So I have to do a chccwdev
> -e 0.0.0207 How do I ma
You probably need to re-stamp the initial RAM disk to know about the
new drive. Barring other requirements, that would be ...
mkinitrd
zipl
-- R;
Rick Troth
Velocity Software
http://www.velocitysoftware.com/
On Mon, Mar 19, 2012 at 9:36 AM, Mark Pace wrote:
> I'm having proble
I'm having problems with the new disk I just added to an LVM group. When I
reboot the system the new DASD is not online. So I have to do a chccwdev
-e 0.0.0207 How do I make it come online automatically when I boot?
TIA!
On Fri, Mar 16, 2012 at 2:24 PM, Mark Post wrote:
> >>> On 3/15/2012 a
>>> On 3/15/2012 at 07:16 PM, Theodore Rodriguez-Bell
>>> wrote:
> My esteemed colleague Marcy Cortes wrote:
> > You shouldn't have to umount to resize. We increase all the time with both
> 10 and 11.
>
> ...if you mounted the filesystem ext3! With the command line it's possible
> to get th
My esteemed colleague Marcy Cortes wrote:
> You shouldn't have to umount to resize. We increase all the time with both
> 10 and 11.
...if you mounted the filesystem ext3! With the command line it's possible to
get that wrong; that's one advantage to the GUI.
> The command is different bet
Looks like Scott gave you the summary:
format the disk (not needed for EDEV or SAN)
and partition it (also not needed for EDEV or SAN)
'pvcreate'
'vgextend'
'lvextend' (which should be easy if LV is not striped)
'resize2fs'
The last step can be done
On Wed, Mar 14, 2012 at 6:43 PM, Shane G wrote:
...
> An lv is not a volume, it's really a "partition" - no, wait, that's what a pv
> is ...
> Unless, of course, a pv is a full volume, and not a partition at all.
> And a vg is a group of volumes except when a pv is not a partition, but a
> volume
Time to put the pipe down, brother :)
Scott Rohling
On Wed, Mar 14, 2012 at 3:43 PM, Shane G wrote:
> This is just your friendly vendor messing with you.
> Not to mention LVM itself.
>
> An lv is not a volume, it's really a "partition" - no, wait, that's what a
> pv
> is ...
> Unless, of course
This is just your friendly vendor messing with you.
Not to mention LVM itself.
An lv is not a volume, it's really a "partition" - no, wait, that's what a pv
is ...
Unless, of course, a pv is a full volume, and not a partition at all.
And a vg is a group of volumes except when a pv is not a partiti
y.
- Original Message -
From: Scott Rohling [mailto:scott.rohl...@gmail.com]
Sent: Wednesday, March 14, 2012 03:43 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: [LINUX-390] Cannot add drive to existing LVM SLES 11 SP 1
just realized that the lvextend command I showed should be: lvextend -L
PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: [LINUX-390] Cannot add drive to existing LVM SLES 11 SP 1
just realized that the lvextend command I showed should be: lvextend -L
+2G /dev/testvg/testlv
And - if the error is about resize - then it's likely because the
filesystem is mounted and you
just realized that the lvextend command I showed should be: lvextend -L
+2G /dev/testvg/testlv
And - if the error is about resize - then it's likely because the
filesystem is mounted and you will need to unmount it. If yast got that
far, I'm not sure what the state of your volume group is - so
, March 14, 2012 2:42 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Cannot add drive to existing LVM SLES 11 SP 1
It's not too difficult to do this on the command line:
lsdasd and figure out what the /dev/dasd device is - let's say it's dasdx
format it: dasdfmt -b 4096 /dev/dasdx
p
Information Builders
Main: 917-339-5238
michael_freder...@ibi.com
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Tom
Duerbusch
Sent: Wednesday, March 14, 2012 3:56 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Cannot add drive to existing LVM SLES 11 S
;Overview' tab select 'Resize'
then select the disk you want add to the group.
Mark Workman
Shelter Insurance Companies
573.214.4672
mwork...@shelterinsurance.com
From: Tom Duerbusch
To: LINUX-390@VM.MARIST.EDU
Date: 03/14/2012 01:34 PM
Subject:Cannot add drive t
immediately and destroy this message.
Data Classification: Limited Access
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Scott
Rohling
Sent: Wednesday, March 14, 2012 2:42 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Cannot add drive to existing LV
rinsurance.com
From: Tom Duerbusch
To: LINUX-390@VM.MARIST.EDU
Date: 03/14/2012 01:34 PM
Subject: Cannot add drive to existing LVM SLES 11 SP 1
Sent by:Linux on 390 Port
I have an existing LVM that is near out of space.
I created it with the defaults that came with SLES
It's not too difficult to do this on the command line:
lsdasd and figure out what the /dev/dasd device is - let's say it's dasdx
format it: dasdfmt -b 4096 /dev/dasdx
partition it: fdasd -a /dev/dasdx (make one partition using whole
deice)
lvm format: pvcreate /dev/dasdx1
add to volume
I have an existing LVM that is near out of space.
I created it with the defaults that came with SLES 11 SP 1.
Now I need to add a drive to the LVM pool. But there doesn't seem to be an
option to add a volume to the pool.
I have done the same thing with SLES 8, 9 and 10, so it is not like I don'
23 matches
Mail list logo