Hi Michael,
sorry for intercepting this thread.
I only wanted to say hello,
as I am one of the participants of your HB2/LVS class held the week before Xmas
last year at Heinlein.
Maybe as an apology a follow-on question on the subject.
Can Perl Compatible Regexes be used (i.e. is the libpcre
Hi,
I haven several heavily loaded Xen resources in a 2 node V2 cluster,
they all depend on the same evms resource.
I would like to implement some kind of delaying to save the hard time
from the dom0 host starting them up at the same time.
There's a start_delay and stop_delay parameters. I
Hi list!
I have been able to sort this one out myself. It seems, that the --
--overwrite-data-of-peer only works, when the resource has the state
outdated. sometimes it happens, that not all resources get that status
before the machine is going down hard. in such cases, sone DRBD outdated
Am Mittwoch, 2. Juli 2008 08:12 schrieb [EMAIL PROTECTED]:
Hi Michael,
sorry for intercepting this thread.
I only wanted to say hello,
as I am one of the participants of your HB2/LVS class held the week before
Xmas last year at Heinlein.
Maybe as an apology a follow-on question on the
Am Mittwoch, 2. Juli 2008 07:51 schrieb [EMAIL PROTECTED]:
(...) [Long discussion, shortened to save bandwidth]
Why do you folks do not use plain SNMP? heartbeat has a wonderful subagent!
SNMP is internet standard (RFC), everywhere implemented and platform
independend! Contrary to your own
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Michael
Schwartzkopff
Sent: Wednesday, July 02, 2008 10:32 AM
To: General Linux-HA mailing list
Subject: Re: [Linux-HA] Strange HB Status displayed for root
vs.unprivilegedusers; bug or feature?
Hello !
I have maybe a bit of a strange question, but i dont have a good idea of how
to solve it.
I´ve a decent setup with heartbeat, 3 servers, 1 with ilo interface, stonith
is working as expected.
My problem isn´t really that part, it´s more how to intergrate the setup
with our
Am Mittwoch, 2. Juli 2008 11:54 schrieb [EMAIL PROTECTED]:
-Original Message-
(...)
Am Mittwoch, 2. Juli 2008 07:51 schrieb [EMAIL PROTECTED]:
(...) [Long discussion, shortened to save bandwidth]
Why do you folks do not use plain SNMP? heartbeat has a
wonderful subagent!
SNMP
Am Mittwoch, 2. Juli 2008 11:34 schrieb Patrik Martinsson:
(...)
Let´s say i want to change my configration on my ha-cluster server,
normally i would change the config file (in this case then cib.xml) on the
main-central-server, and then let my management-system take care of it,
wich i could
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Michael
Schwartzkopff
Sent: Wednesday, July 02, 2008 12:04 PM
To: General Linux-HA mailing list
Subject: Re: [Linux-HA] Strange HB Status displayed for
rootvs.unprivilegedusers; bug or feature?
Am
Hi Michael,
[...]
everything about heartbeat integration in the net-snmp system
and the nagios monitoring system is described in: [...]
Jaja - hab' ich schon bestellt. ;-)
The other short answer:
Read the README file in the snmp_subagent directory of the
source files.
I am using the
On 2/07/2008, at 9:34 PM, Patrik Martinsson wrote:
Let´s say i want to change my configration on my ha-cluster server,
normally
i would change the config file (in this case then cib.xml) on the
main-central-server, and then let my management-system take care
of it,
wich i could do here
Am Mittwoch, 2. Juli 2008 13:04 schrieb Hildebrand, Nils, 232:
Hi Michael,
Long version for those that are not able to read the README:
1) ./ConfigureMe config --enable-snmp-subagent This part is
done on the most distributions.
How can I check wether HB has been compiled that way?
Hi,
The vip address is configured on the real servers on lo:0.
Do you get martian source-messages in /var/log/messages ?
What kind of lvs-method do you use?
Direct Routing
If you are using DR-lvs you should rather use the physical interface
where your lvs-machine sends its packets.
Is
在 2008-7-2,下午6:48, Nathan Ward 写道:
On 2/07/2008, at 9:34 PM, Patrik Martinsson wrote:
Let´s say i want to change my configration on my ha-cluster server,
normally
i would change the config file (in this case then cib.xml) on the
main-central-server, and then let my management-system take
Hello,
my simple active/passive cluster seems to work but when running and I do:
/opt/apache2/bin/apachectl stop mv /opt/apache2/bin/httpd
/opt/apache2/bin/httpd_
Heartbeat is not failing over apache to node2 (Hard error: apache_2_start_0
failed with rc=6.) This is really odd because the log
On 2008-07-01T23:28:33, Hannes Dorbath [EMAIL PROTECTED] wrote:
Is there a way with legacy V1 config to power off the other node
permanently on STONITH calls (no reboot)?
Short off modifying the code, no.
___
Linux-HA mailing list
Starting DRBD resources:Can not load the drbd module
Jun 4 20:12:51 TEST-LAB01 modprobe: FATAL: Error inserting drbd
(/lib/modules/2.6.25.5-1.1-default/updates/drbd.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
drbd: Unknown symbol blk_put_queue
What's going on, how do I
Hannes Dorbath wrote:
Is there a way with legacy V1 config to power off the other node
permanently on STONITH calls (no reboot)?
You may be able to write your own external STONITH plugin which simply
powers off the node when it receives a reset request, but using the
current code and current
Does anyone happen to have this rpm that I can get. I know its ancient.
heartbeat-stonith-1.2.2-8.rh.9.i386.rpm
If not how hard is it for me to upgrade to a file that I can download?
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
On Wed, Jul 02, 2008 at 04:42:08PM -0500, [EMAIL PROTECTED] wrote:
Hello I'm having problems getting resources to run on my nodes.
To keep things simple I've gone down to one IpAddr2 resource and
only one node. Basically I'm getting resource cannot run
anywhere errors on any resource I try.
Hi there,
I've been running with a v1 config fine for a while and now have v2 on
the test bed.
So far its working ok with respect to failovers but I've hit a problem
with administering it.
# cibadmin -Q
Signon to CIB failed: connection failed
Init failed, could not perform requested
On Thu, Jul 03, 2008 at 02:54:34PM +1200, Steve Wray wrote:
I've been running with a v1 config fine for a while and now have
v2 on the test bed.
So far its working ok with respect to failovers but I've hit a
problem with administering it.
# cibadmin -Q
Signon to CIB failed: connection
23 matches
Mail list logo