Hello-
I am wondering what is the status of the haclient.py/mgmtd development.
I notice that it has been removed from the tip of the dev tree, and that
it exists in the lha-2.1 tree. I would like to help with the effort
developing this if possible. I did notice some discussion on this list
Gabriel Bermudez ha scritto:
Hi,
I'm trying to configure a high availability router for my internal
network. I'm able to set both private and public ips on eth0:0 and
eth2:0 respectively with heartbeat. The gateway is configured using
the /etc/sysconfig/network file (using centos 5.2)
Hello, maybe i was not clear about why i wrote here:
i don't want to notify a bug, i only want to have some suggestions to
resolve my configuration problems.
The version of heartbeat is only a reference for the readers to know
what possible features are available.
Maybe someone use the same
Alex Balashov wrote:
Why would you want to do this versus sending a gratuitous ARP?
Nagaraja, Madhukar (Madhukar) wrote:
Hello,
Is there any script just like IPaddr for the MAC address takeover ??
If not, any other options.
Please let me know.
Thanks.
Hi,
I used a
--- On Tue, 12/2/08, Brian Horan [EMAIL PROTECTED] wrote:
From: Brian Horan [EMAIL PROTECTED]
preferred-node isn't working for you?
That is v1 configuration isnt it? Im using cib xml.
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
--- On Wed, 12/3/08, Dominik Klein [EMAIL PROTECTED] wrote:
From: Dominik Klein [EMAIL PROTECTED]
As suggested in another reply, look into colocation
constraints. If you only use primitive resources (no clones
or master/slave resources), you could also use a group
instead of single
As suggested in another reply, look into colocation
constraints. If you only use primitive resources (no clones
or master/slave resources), you could also use a group
instead of single resources. In fact, groups are just a
syntax shortcut for colocation constraints between all
resources within
Hi,
On Wed, Dec 03, 2008 at 08:22:28AM +1000, Alex Strachan wrote:
Heartbeat is not sending the reset command when 'Executing reboot fencing
operation'
How do I going about raising a bug? Please point me to How to raise a
bug', so that I can collect the necessary logs.
Hi,
On Tue, Dec 02, 2008 at 04:33:21PM +0800, James Little wrote:
Thanks for the reply Dejan. I've added code for the status action but still
no luck. So my script is now:
###
usage() {
echo
Hi,
On Wed, Dec 03, 2008 at 08:40:46AM +0100, Dominik Klein wrote:
There was a thread about this in November. Search the archives for thread
E-Mail Notification Problem by takeover. Iirc, it was a problem with the
package which should be manually fixable by editing an included file.
Right.
Hi all,
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
Hello,
I'm building a two node cluster with heartbeat R1 .
I would like to locate my filesystem on top of a stack formed by
(top) lvm + dm-crypt + drbd + lvm + raid (bottom).
So when I switch as primary from node1 to node2 I have to switch
the drbd resource and to migrate the lvm + dm-crypt
Thanks Dejan, I have it working now. I realised that the binaries were
in a custom path and that it had been added to user shell profiles,
including root (hence the reason the script worked when ran
manually). So I added the path manually in this script and then
exported.
--
Regards
Hi,
On Wed, Dec 03, 2008 at 07:42:50AM +0400, Rodney McKee wrote:
Hello,
I have been trying to fail over 9 addresses between 2 firewalls using the
following send_arp syntax:
send_arp ext_interface xxx.xxx.29.185 ext_mac_addr xxx.xxx.27.249
and
send_arp ext_interface
On Tue, Dec 2, 2008 at 10:59 PM, Adrian Overbury [EMAIL PROTECTED] wrote:
I have a pgsql resource set up on my 2-node heartbeat 2.1.3 cluster in CRM.
I'd like to be able to restart Postgres when I made configuration changes,
but I've found that if the database is busy (thus making the Postges
Hello everyone.
I am trying to run a 2 node cluster with 1 shared IP for Tomcat. This
works fine until I set the monitor operation inside the Tomcat resource
where the CRM keeps trying to restart Tomcat over and over infinitely.
Without the monitor operation in the CIB it won't keep trying to
resources
primitive id=ip_resource_1 class=ocf type=IPaddr
provider=heartbeat
instance_attributes id=inst_attr
attributes
nvpair name=ip value=@VIRTUAL_IP@ id=vip1/
/attributes
/instance_attributes
/primitive
Here is the output when I try a re-probe of services.
Dec 3 12:10:09 mail1 crm_resource: [23866]: info: Invoked: crm_resource -P -H
mail1
Dec 3 12:10:09 mail1 crmd: [4914]: ERROR: verify_stopped: Resource masterHttpd
was active at shutdown. You may ignore this error if it is unmanaged.
Dec
I am running drbd-8.0.8 and was forced to install a new kernel on a
fedora 8 machine (local security policy). Before I booted off the new
kernel, I am trying to
compile and install the new drbd.ko module.
The following kernel packages are installed:
kernel-devel-2.6.26.6-49.fc8
On Wed, Dec 3, 2008 at 18:47, Thomas Mueller [EMAIL PROTECTED] wrote:
resources
primitive id=ip_resource_1 class=ocf type=IPaddr
provider=heartbeat
instance_attributes id=inst_attr
attributes
nvpair name=ip value=@VIRTUAL_IP@ id=vip1/
Check out the Is This init Script LSB Compatible? appendix in
http://clusterlabs.org/mw/Image:Configuration_Explained.pdf
Until those tests pass, there is no point using it in the cluster - it
will only blow up.
On Wed, Dec 3, 2008 at 18:09, Darren Mansell
[EMAIL PROTECTED] wrote:
Hello
Dejan,
On Wed, Dec 3, 2008 at 7:37 PM, Dejan Muhamedagic [EMAIL PROTECTED]wrote:
Hi,
On Wed, Dec 03, 2008 at 07:42:50AM +0400, Rodney McKee wrote:
Hello,
I have been trying to fail over 9 addresses between 2 firewalls using the
following send_arp syntax:
send_arp ext_interface
Hi Nick,
I followed your advise but it didn't work out. This are the content of
the files where I try to set the default gateway:
/etc/rc.local
ip route add default via xxx.xxx.xxx.xxx dev eth2
touch /var/lock/subsys/local
/etc/sysconfig/network-scripts/route-eth2
default via
On Wed, 2008-12-03 at 21:23 +, Todd, Conor (PDX) wrote:
I can't do this using a crontab because one never knows which host
will be running the SVN service (and have the disks mounted for it).
Has anyone else tackled this issue yet?
You may not know in advance whether a given host is
--- On Wed, 12/3/08, Andrew Beekhof [EMAIL PROTECTED] wrote:
From: Andrew Beekhof [EMAIL PROTECTED]
Subject: Re: [Linux-HA] Re: Active Ressources should be always on the same
node
To: General Linux-HA mailing list linux-ha@lists.linux-ha.org
Date: Wednesday, December 3, 2008, 3:40 PM
On
sorry, in this context - what does ordered refer to? That all primitives in a
group are started in that order?
Having resources defined like
group
primitive id=1
primitive id=2
primitive id=3
primitive id=4
primitive id=5
/group
ordered=true, the default, would make a start in this order:
1
26 matches
Mail list logo