a resource to another node.
But I am not an expert! I merely knew how to clear up the error message.
On Tue, Mar 6, 2012 at 10:28 AM, William Seligman
selig...@nevis.columbia.edu wrote:
On 3/6/12 1:04 PM, Jerome Yanga wrote:
crm_mon shows the error below.
Failed actions:
� � drbd0
crm_mon shows the error below.
Failed actions:
drbd0:1_monitor_59000 (node=testserver1.example.com, call=132,
rc=-2, status=Timed Out): unknown exec error
I have check DRBD and the mirror is connected and uptodate on both nodes.
The error above caused the resources to failover and it seems
Thanks, Bill.
Do you know by chance if that command you have provided bounces the resource?
Regards,
j
On Tue, Mar 6, 2012 at 10:28 AM, William Seligman
selig...@nevis.columbia.edu wrote:
On 3/6/12 1:04 PM, Jerome Yanga wrote:
crm_mon shows the error below.
Failed actions:
drbd0
Understood. Thanks again, Bill.
Regards,
j
On Tue, Mar 6, 2012 at 11:46 AM, William Seligman
selig...@nevis.columbia.edu wrote:
On 3/6/12 2:38 PM, Jerome Yanga wrote:
Do you know by chance if that command you have provided bounces the resource?
I don't know what you mean by bounce
Subject: Re: [Linux-HA] A Node cannot rejoin the cluster after a rebuild
try using crm_uuid to write back the value Rubric thinks Normen should have,
i forget the name of the file on rubric that contains it. hostcache
or something like that
On Mon, May 11, 2009 at 6:18 PM, Jerome Yanga jya...@esri.com
Here is the scenario.
01) There are two nodes in the Active-Passive cluster--Nomen and Rubric.
02) Nomen had a hardware and software failure.
03) Rubric took over the resources as expected.
04) Due to the failures, Nomen's operating system needed to be rebuilt.
05) DRBD was reinstalled
.
jerome
-Original Message-
From: linux-ha-boun...@lists.linux-ha.org
[mailto:linux-ha-boun...@lists.linux-ha.org] On Behalf Of Jerome Yanga
Sent: Tuesday, April 28, 2009 5:28 PM
To: General Linux-HA mailing list
Subject: [Linux-HA] Cannot get Heartbeat, DRBD and NFS to work together
Hi
Hi peeps!
I cannot get my High Availability NFS server work right. Here is my
configuration.
primitive share_name ocf:heartbeat:nfsserver \
params nfs_init_script=/etc/init.d/nfs \
params nfs_notify_cmd=/sbin/rpc.statd \
params nfs_shared_infodir=/data \
params
not stop the DRBD
Daemon
Jerome Yanga wrote:
Stopping the Heartbeat daemon (service heartbeat stop) does not stop the DRBD
daemon even if it is one of the resources.
# service heartbeat stop
Stopping High-Availability services:
[ OK
Thanks.
In my situation, DRBD is a resource in my cluster. Hence, it is managed by
heartbeat.
jerome
-Original Message-
From: linux-ha-boun...@lists.linux-ha.org
[mailto:linux-ha-boun...@lists.linux-ha.org] On Behalf Of Dominik Klein
Sent: Friday, April 03, 2009 1:50 AM
To: General
Stopping the Heartbeat daemon (service heartbeat stop) does not stop the DRBD
daemon even if it is one of the resources.
# service heartbeat stop
Stopping High-Availability services:
[ OK ]
# service drbd status
drbd driver loaded OK;
I think I had this issue in the past as well.
I just made sure that MAILCMD is assigned a mail app in .ocf-binaries. Try the
command below.
sed -i '/MAILCMD/s/=/=\/bin\/mail/g'
/usr/lib/ocf/resource.d/heartbeat/.ocf-binaries
jerome
-Original Message-
From:
When I manually migrate a group resource, a constraint is automatically
created. Is there a way to avoid this?
Here is the automatically created constraint.
rsc_location id=cli-standby-DRBD_Group rsc=DRBD_Group
rule id=cli-standby-rule-DRBD_Group score=-INFINITY
boolean-op=and
] On Behalf Of Dominik Klein
Sent: Monday, March 09, 2009 12:05 AM
To: General Linux-HA mailing list
Subject: Re: [Linux-HA] Having issues with getting DRBD to work with Pacemaker
Hi
Jerome Yanga wrote:
Dominik,
As usual, you are right on the money. I should have caught that myself.
Thank you
the service you are unloading
the DRBD module, hence it can not start.
Jerome Yanga wrote:
Hi Neil!
Yes. DRBD works outside of Pacemaker. When I do a service drbd start on
each node, drbd runs properly and are both Secondary.
jerome
-Original Message-
From: linux-ha-boun
I apologize, Brian. The gratitude should have been sent to you. Thanks,
Brian. :)
Regards,
jerome
-Original Message-
From: Jerome Yanga
Sent: Friday, March 06, 2009 9:35 AM
To: General Linux-HA mailing list
Subject: RE: [Linux-HA] Having issues with getting DRBD to work
scripts by hand (you have to set a
bunch of env variables). I can't find the script I used to test drbd, but I've
attached one I used for mysql; you should be able to adapt it to your use. As
always, remember bash -x is your friend.
Neil
Jerome Yanga wrote:
Hi Neil!
Yes. DRBD works outside
:54 PM
To: General Linux-HA mailing list
Subject: Re: [Linux-HA] Having issues with getting DRBD to work with Pacemaker
Hi
Jerome Yanga wrote:
Hi! I am having issues with getting DRBD to work with Pacemaker. I can get
Pacemaker and DRBD run individually but not DRBD managed by Pacemaker. I
Hi! I am having issues with getting DRBD to work with Pacemaker. I can get
Pacemaker and DRBD run individually but not DRBD managed by Pacemaker. I tried
following the instruction in the site below but the resources will not go
online.
http://clusterlabs.org/wiki/DRBD_HowTo_1.0
Below is my
have to fix drbd first
before trying to
add pacemaker to the mix.
Neil
Jerome Yanga wrote:
Hi! I am having issues with getting DRBD to work with Pacemaker. I can get
Pacemaker and DRBD run individually but not DRBD managed by Pacemaker. I
tried following the instruction in the site
I found the site as soon as I sent it out.
http://clusterlabs.org/wiki/DRBD_HowTo_1.0
'Hope this helps others. :)
Regards,
Jerome
From: Jerome Yanga
Sent: Wednesday, February 25, 2009 2:40 PM
To: General Linux-HA mailing list
Subject: [Linux-HA] Call cib_create failed (-47): Update does
I have been trying to add DRBD on my Pacemaker config using crm(live) but I
keep getting this message below:
Call cib_create failed (-47): Update does not conform to the configured
schema/DTD
Can someone show me the syntax for crm(live) to add my DRBD resource below?
master_slave
: Thursday, January 29, 2009 3:51 AM
To: General Linux-HA mailing list
Subject: Re: [Linux-HA] Failover not working as I expected
On Tue, Jan 27, 2009 at 22:04, Jerome Yanga jya...@esri.com wrote:
Dominik,
Here is the status of the two concerns I needed help on.
01) When a node comes back up after
list
Subject: Re: [Linux-HA] Failover not working as I expected
Good morning Jerome
we should make this a daily thing, shouldn't we?
Jerome Yanga wrote:
Dominik,
I apologize for leaving resource-stickiness out. I had it there previously
but due to the trial and errors I had performed
Dominik,
Thank you much. Adding resource-stickiness and getting rid of the
constraint helped a lot. The resources does not go back to Nomen anymore when
it's heartbeat is started again (resources stays with Rubric). However, the
resources still gets bounced once Nomen joins the cluster.
I have tried reading and interpreting the link below but could not get the
Resource Monitoring to work.
http://linux-ha.org/ClusterInformationBase/Actions
I have installed heartbeat-2.1.3-1. The following is in my
/var/lib/heartbeat/crm/cib.xml file.
primitive id=ecas class=lsb type=dirsrv
I have tried reading and interpreting the link below but could not get the
Resource Monitoring to work.
http://linux-ha.org/ClusterInformationBase/Actions
I have installed heartbeat-2.1.3-1. The following is in my
/var/lib/heartbeat/crm/cib.xml file.
primitive id=ecas class=lsb type=dirsrv
27 matches
Mail list logo
