Shaul Karl£¬ÄúºÃ£¡,
The error message is:
Couldn't load bindings.tcl or set environment variable.
CONTROL_PANEL_LIB_DIR ot the control-pannel library dir.
today,I use printtool in X windows and it works ok.
ÔÚ 00-9-24 ÏÂÎç 11:11:00 ÄúдµÀ£º
>> Hi !
>>I installed a redhat6.2,but th
Hi...
my linuxconf takes 1.5 minutes or so to load in text mode, could it have
anything to do with resolving issues??
is there anyway to get around it?
(Redhat 6.2 - 3 NIC's - 1GB RAM - Dual CPU Intel running on Intel
Lancewood Mother Board)
Thanks.
Benji
=
Shaul,
I think i found your problem...
When i use 640, it disconnects me after a while and when it doesnt i get
a poor connection
Use 725 instead. You'll probably see an improvment
Yarin
- Original Message -
From: "Shaul Karl" <[EMAIL PROTECTED]>
To: "Pinchas Rosenfeld" <[EMAIL P
> Hi Shaul,
> This average transfer rate is really poor.
> I'm using kcmkisdn for configuration and kisdn (by Millenium)
> for connecting to my ISP which is isdn.net.il (bezeqint.net).
> My OS is linux mandrake 7.1 with kernel 2.2.15.
> The ISDN card is Fritz av1.
> The average transfer rate is 7
hi, i have two computers, one (the one i am
using now) is running linux (slack) and the other one is running win98.the
linux machine got a cable connection (DHCP) and both of the computers got a
netcard and the are connected togather using a HUB.i want to share my cable
connection with the t
the slides for tommorow's Haifux lecture are ready and available
(temporarily) at http://www.actcom.co.il/~choo/corba-programming/ .
they should be on haifux's site pretty soon.
just to remind you, the lecture will be about writing simple CORBA servers
and clients. familiarity with C++ is assume
> Hi !
>I installed a redhat6.2,but the printtool can't work,neither
> in linuxconf or comand line.
>
> no display name or no $DISPLAY environment variable
> couldn't load binding.tcl
>
Don't know about linuxconf but as far as I know no $DISPLAY means that you are
not trying it unde
Hmm, in my modem i had to send some AT command in order to activate this. i
really don't remeber what it was, but i guess USR will give this
information. did you try to use that command? if not, please look it in the
manual.
in my modem, it had 3 statuses: one without CID, second with CID on ASCII
BezeqInt has probably the best network traffic statistics in Israel when it
comes to ISDN.
Don't u all forget that ISDN lines, like modem lines are not your lines
only, A lot of ppl use the same line or should I say the same bandwidth as u
do...that is why the speeds change from time to time.
But
On 0, Oren Held <[EMAIL PROTECTED]> wrote:
> Hello
>
> What model is your HP Djet ?
> Some models (72x, 8xx) require special driver, because they're a
> 'winprinter', or however you want to call it..
>
> Cya,
> Oren
>
> On Sun, 24 Sep 2000, Subba Rao wrote:
>
> >
> > Hello,
> >
> > I have i
Hi !
I installed a redhat6.2,but the printtool can't work,neither
in linuxconf or comand line.
no display name or no $DISPLAY environment variable
couldn't load binding.tcl
How can configue my lq1600k printer?
=
To unsu
Hi !
Did somebody succeeded to get caller-id from analog
modem connected to linux box ?
I need it for portslave - some kind of special getty
program which talk with RADIUS, but seems like
my external USR Sportster 56k modem don't send it to me :-(
Any success with this modem or any other Analo
Hello
What model is your HP Djet ?
Some models (72x, 8xx) require special driver, because they're a
'winprinter', or however you want to call it..
Cya,
Oren
On Sun, 24 Sep 2000, Subba Rao wrote:
>
> Hello,
>
> I have installed a HP Deskjet printer on a Windows boxen which is networked
> to t
Hello,
I have installed a HP Deskjet printer on a Windows boxen which is networked
to the Linux box. Currently my samba settings do allow Linux disk shares to be
accessed from Windows.
Before further dwelling into samba settings, the howto docs indicate that I
have to complete the printcap sett
Hi,
When I use Netvision with a single 64Kbit/s, I get upto 7Kbyte/s
download rate.
Sometimes I get the same result with BezeqInt. But usually
BezeqInt provides a poor result because of there networking
problems.
When I use BezeqInt with Dual (Bundled) 2 x 64Kbit/s channels, I get
sometimes upto
Idan Sofer wrote:
> --- guy keren <[EMAIL PROTECTED]> wrote:
>
>>> as a regular user? (Without using suid root)
>>
>> modify the kernel to allow that. as far as i know,
>> the kernel won't allow
>> a regular user to set an ethernet card to promicious
>
> Just an idea i have for quite a time..
> Hey,
>
> On Sat, 23 Sep 2000, Shaul Karl wrote:
>
> > 4.71 KB/s seems to me rather poor. What other people are getting in a similar
> > circumstances? How can I try to improve it? Does the fact that I am using a
> > passive card has something to do with it? Can it be that I have to change my
17 matches
Mail list logo
