le all the way to
> ftrace_call_repalce() and all of its users.
>
> FWIW
>
> Tested-by: Qais Yousef
--
Best regards,
Alexander Sverdlin.
428.
> Encoding A2 Even numbers in the range –33554432 to 33554430.
>
> which matches what's in the code (T1 for thumb2 and A1 for arm).
>
> Why do you think it's wrong?
thanks for checking this! I'll re-send v8 with your proposal.
--
Best regards,
Alexander Sverdlin.
etter remain encapsulated there.
could you please check the negative limits? I have an opinion, my limits are
correct. I could add extra parameter to arm_gen_branch_link(), but for this
I first need to fix its negative limits, which, I believe, well... Approximate
:)
--
Best regards,
Alexander Sverdlin.
ger than
two
years and I actually hope these patches to be finally merged at some point.
But you are welcome to optimize them with follow up patches :)
--
Best regards,
Alexander Sverdlin.
essentially per-soc pecularities around
> interrupts. The interrupt is not cascaded so it need special
> handling.
>
> I think it can be done with quite little code.
Guys, have you actually looked onto my patch before these reviews?
--
Best regards,
Alexander Sverdlin.
Hello Andy,
>> From: Alexander Sverdlin
>>
>> There are several implementations of PL061 which lack GPIOINTR signal in
>> hardware and only have individual GPIOMIS[7:0] interrupts. Use the
>> hierarchical interrupt support of the gpiolib in these cases (if at
ary chosen to not fit into our module space
and we have more modules already loaded. But you are free to adjust the
amount of NOPs! :)
--
Best regards,
Alexander Sverdlin.
world "proprietary" modules (which of
course
were the real trigger for the patch):
https://www.spinics.net/lists/arm-kernel/msg878599.html
--
Best regards,
Alexander Sverdlin.
o be built-in
>
> sed -i 's/=m/=y/' .config
>
> FWIW, I see the problem with your patch applied too. Trying to dig more into
> it..
Then it's definitely the problem explained in the second link. If you have
THUMB2 kernel, maybe
you have to switch to ARM.
--
Best regards,
Alexander Sverdlin.
>> +#ifdef CONFIG_ARM_MODULE_PLTS
>> +if (!new) {
>> +struct module *mod = rec->arch.mod;
>> +
>> +if (mod) {
>
> What would happen if !new and !mod?
I believe, that's exactly what happens in the dump you experience with your
kernel.
This is not covered by this patch, this patch covers the issue with modules in
vmalloc area.
>> +aaddr = get_module_plt(mod, ip, aaddr);
>> +new = ftrace_call_replace(ip, aaddr);
>
> I assume we're guaranteed to have a sensible value returned in 'new' here?
Otherwise you'd see the dump you see :)
It relies on the already existing error handling.
>> +}
>> +}
>> +#endif
--
Best regards,
Alexander Sverdlin.
st at modprobe?
And then I use this module to test for the problem:
/******
* Author: Alexander Sverdlin
*
* Copyright (c) 2018 Nokia
*
* SPDX-License-Identifier: GPL-2.0
*
* This module is in
Currently the naming of the GPIO chips depends on their order in the DT,
but also on the kernel version (I've noticed the change from v5.10.x to
v5.11). Honor the persistent enumeration in the "aliases" node like other
GPIO drivers do.
Signed-off-by: Alexander Sverdlin
---
Yes,
pu=ep9312
> +AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 $(cc-option,
> -fno-integrated-as)
>
> obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
> obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
--
Alexander Sverdlin.
Set the (optional) idle pinctrl state during runtime suspend. This is the
same schema used in PL022 driver and can help with HW designs sharing
the SPI lines for different purposes.
Signed-off-by: Alexander Sverdlin
---
drivers/spi/spi-omap2-mcspi.c | 24 ++--
1 file changed
This functionality is similar to heartbeat and activity triggers and
turns the timer-triggered LEDs off right before reboot. It's configurable
via new module parameter "reboot_off" to preserve original behaviour.
Signed-off-by: Alexander Sverdlin
---
drivers/leds/trigger/ledtrig-ti
quot;)
> Signed-off-by: Nikita Shubin
Tested-by: Alexander Sverdlin
> ---
> v5->v6:
> - add devm_kasprintf() return value check and move it out from
> ep93xx_init_irq_chip()
> - removed ep93xx_gpio_irq_chip
> - pass girq->chip instead of removed ep93xx_gpio_irq_chip to
chip")
> Signed-off-by: Nikita Shubin
I performed a bootup with the whole patch-series and
confirm that the warning is gone. Thank you for looking into this!
Reviewed-by: Alexander Sverdlin
Tested-by: Alexander Sverdlin
> ---
> v4->v5:
> - generate IRQ chip's names d
fd935fc421e74 ("gpio: ep93xx: Do not pingpong irq numbers")
> Signed-off-by: Nikita Shubin
I performed a bootup with the whole patch-series and
confirm that the BUG is gone.
Reviewed-by: Alexander Sverdlin
Tested-by: Alexander Sverdlin
> ---
> v4->v5:
> - make to_e
t;, 0);
> - if (!phy_node && of_phy_is_fixed_link(priv->of_node)) {
> + if (!phy_node && of_phy_is_fixed_link(priv->of_node))
> phy_node = of_node_get(priv->of_node);
> - }
> if (!phy_node)
> goto no_phy;
>
--
Best regards,
Alexander Sverdlin.
PIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0),
> };
>
> static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned offset,
> @@ -326,13 +331,14 @@ static int ep93xx_gpio_f_to_irq(struct gpio_chip *gc,
> unsigned offset)
> return EP93XX_GPIO_F_IRQ_BASE + offset;
> }
>
> -static int ep93xx_gpio_add_bank(struct gpio_chip *gc,
> +static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
> struct platform_device *pdev,
> struct ep93xx_gpio *epg,
> struct ep93xx_gpio_bank *bank)
> {
> void __iomem *data = epg->base + bank->data;
> void __iomem *dir = epg->base + bank->dir;
> + struct gpio_chip *gc = >gc;
> struct device *dev = >dev;
> struct gpio_irq_chip *girq;
> int err;
> @@ -347,6 +353,12 @@ static int ep93xx_gpio_add_bank(struct gpio_chip *gc,
> girq = >irq;
> if (bank->has_irq || bank->has_hierarchical_irq) {
> gc->set_config = ep93xx_gpio_set_config;
> + egc->eic = devm_kcalloc(dev, 1,
> + sizeof(*egc->eic),
> + GFP_KERNEL);
> + if (!egc->eic)
> + return -ENOMEM;
> + egc->eic->irq_offset = bank->irq;
> girq->chip = _gpio_irq_chip;
> }
>
> @@ -415,7 +427,7 @@ static int ep93xx_gpio_probe(struct platform_device *pdev)
> return PTR_ERR(epg->base);
>
> for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
> - struct gpio_chip *gc = >gc[i];
> + struct ep93xx_gpio_chip *gc = >gc[i];
> struct ep93xx_gpio_bank *bank = _gpio_banks[i];
>
> if (ep93xx_gpio_add_bank(gc, pdev, epg, bank))
--
Alexander Sverdlin.
_BASE + offset;
> }
>
> +static void ep93xx_init_irq_chip(struct irq_chip *ic, const char *irq_name)
> +{
> + ic->name = irq_name;
Assuming you pass "label" here, you could do something like
ic->name = kasprintf(GFP_KERNEL, "gpio-irq-%s", irq_name);
> + ic->irq_ack = ep93xx_gpio_irq_ack;
> + ic->irq_mask_ack = ep93xx_gpio_irq_mask_ack;
> + ic->irq_mask = ep93xx_gpio_irq_mask;
> + ic->irq_unmask = ep93xx_gpio_irq_unmask;
> + ic->irq_set_type = ep93xx_gpio_irq_type;
> +}
--
Alexander Sverdlin.
p gc[8];
> };
>
> static const u8 int_register_offset[8] = { 0x90, 0xac, [5] = 0x4c };
> #define EP93XX_INT_TYPE1_OFFSET 0x00
> #define EP93XX_INT_TYPE2_OFFSET 0x04
> #define EP93XX_INT_EOI_OFFSET 0x08
> #define EP93XX_INT_EN_OFFSET 0x0c
> #define EP93XX_INT_STATUS_OFFSET 0x10
> #define EP93XX_INT_RAW_STATUS_OFFSET 0x14
> #define EP93XX_INT_DEBOUNCE_OFFSET 0x18
Makes sense to me.
--
Alexander Sverdlin.
.
This option can probably simplify the handling of the names
for irq chips as well.
> 28.01.2021, 19:19, "Alexander Sverdlin" :
> > Hello Nikita,
> >
> > On Thu, 2021-01-28 at 18:11 +0200, Andy Shevchenko wrote:
> > > > +/*
> > > > + * F Port
Hi!
On Thu, 2021-01-28 at 15:21 +0300, Nikita Shubin wrote:
> As ->to_irq is redefined in gpiochip_add_irqchip, having it defined
> in
> driver is useless, so let's drop it.
>
> Signed-off-by: Nikita Shubin
Acked-by: Alexander Sverdlin
> ---
> drivers/gpio/gpio-ep93x
setting handler's into single loop
>
> Signed-off-by: Nikita Shubin
Acked-by: Alexander Sverdlin
> ---
> v2->v3
> - use ->num_parents instead of ARRAY_SIZE()
> ---
> drivers/gpio/gpio-ep93xx.c | 9 -
> 1 file changed, 4 insertions(+), 5 deletions(-)
>
>
n the fly"
>
> And that's not the thing we want.
>
> Signed-off-by: Nikita Shubin
Acked-by: Alexander Sverdlin
> ---
> drivers/gpio/gpio-ep93xx.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
Hi!
On Thu, 2021-01-28 at 15:21 +0300, Nikita Shubin wrote:
> - use predefined constants instead of plain numbers
> - use provided bank IRQ number instead of defined constant
> for port F
>
> Signed-off-by: Nikita Shubin
Acked-by: Alexander Sverdlin
> ---
> drivers/gp
It just adds another
level on confusion into the code, which even the author got
wrong :)
Array with holes would be more obvious, but one can also embedd
the necessary values into struct ep93xx_gpio_bank.
--
Alexander Sverdlin.
ould be to undelete MIPS spinlocks and
make these broken qspinlocks a configurable option for MIPS? I don't even
mind if they will be default option for those not interested in performance
or latency.
--
Best regards,
Alexander Sverdlin.
Hi!
On 28/01/2021 12:33, Peter Zijlstra wrote:
> On Thu, Jan 28, 2021 at 08:27:29AM +0100, Alexander Sverdlin wrote:
>
>>>> +#define __smp_store_release(p, v)
oint to above, says:
"Since Octeon does not do speculative reads, this functions as a full barrier."
--
Best regards,
Alexander Sverdlin.
up but
> overall this looks very very good.
as we don't have a dedicated EP93xx tree, would you like to take
the series in one of your trees?
--
Alexander Sverdlin.
hips
>
> Fixes: a8173820f441 ("gpio: gpiolib: Allow GPIO IRQs to lazy
> disable")
> Signed-off-by: Nikita Shubin
Yes, it indeed fixes the warnigs mentioned above,
Tested-by: Alexander Sverdlin
> ---
> drivers/gpio/gpio-ep93xx.c | 45 ++
n the fly"
>
> And that's not the thing we want.
>
> Signed-off-by: Nikita Shubin
I have no code out-of-the-box to test the GPIO interrupts on EP93xx,
so I just did a bootup with this patch. But the change looks fine to
me:
Acked-by: Alexander Sverdlin
> ---
> driv
Hi!
On 27/01/2021 23:43, Peter Zijlstra wrote:
> On Wed, Jan 27, 2021 at 09:01:08PM +0100, Alexander A Sverdlin wrote:
>> From: Alexander Sverdlin
>>
>> Ensure writes are pushed out of core write buffer to prevent waiting code
>> on another cores from spinning l
Hi!
On 27/01/2021 23:21, Will Deacon wrote:
> On Wed, Jan 27, 2021 at 09:01:08PM +0100, Alexander A Sverdlin wrote:
>> From: Alexander Sverdlin
>>
>> Ensure writes are pushed out of core write buffer to prevent waiting code
>> on another cores from spinning longer than
Hi!
On 27/01/2021 23:34, Peter Zijlstra wrote:
> On Wed, Jan 27, 2021 at 09:36:24PM +0100, Alexander A Sverdlin wrote:
>> From: Alexander Sverdlin
>>
>> Flushing the write buffer brings aroung 10% performace on the tight
>> uncontended spinlock loops on Octeon. R
Hello Peter,
On 27/01/2021 23:32, Peter Zijlstra wrote:
>> Link: https://lore.kernel.org/lkml/5644d08d.4080...@caviumnetworks.com/
please, check the discussion pointed by the link above...
>> Signed-off-by: Alexander Sverdlin
>> ---
>> arch/mips/include/asm/barrier.h
data, NULL, NULL, dir, NULL, 0);
> if (err)
> @@ -356,7 +380,8 @@ static int ep93xx_gpio_add_bank(struct gpio_chip
> *gc,
> girq = >irq;
> if (bank->has_irq || bank->has_hierarchical_irq) {
> gc->set_config = ep93xx_gpio_set_config;
> - girq->chip = _gpio_irq_chip;
> + port = ep93xx_gpio_port(epg, gc);
> + girq->chip = >ic[port];
> }
>
> if (bank->has_irq) {
> @@ -423,6 +448,8 @@ static int ep93xx_gpio_probe(struct
> platform_device *pdev)
> if (IS_ERR(epg->base))
> return PTR_ERR(epg->base);
>
> + ep93xx_init_irq_chips(epg);
> +
> for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
> struct gpio_chip *gc = >gc[i];
> struct ep93xx_gpio_bank *bank =
> _gpio_banks[i];
--
Alexander Sverdlin.
gpio_irq = EP93XX_GPIO_F_IRQ_BASE + i;
> - irq_set_chip_data(gpio_irq, >gc[5]);
> - irq_set_chip_and_handler(gpio_irq,
> -
> _gpio_irq_chip,
> -
+ for (i = 0; i < ARRAY_SIZE(girq->parents); i++) {
Why do you use ARRAY_SIZE() here instead of ->num_parents like above?
> + girq->parents[i] = platform_get_irq(pdev, i +
> 1);
> gpio_irq = EP93XX_GPIO_F_IRQ_BASE + i;
> irq_set_chip_data(gpio_irq, >gc[5]);
> irq_set_chip_and_handler(gpio_irq,
--
Alexander Sverdlin.
Hi!
On Wed, 2021-01-27 at 13:46 +0300, Nikita Shubin wrote:
> Fix typo in comment.
>
> Signed-off-by: Nikita Shubin
Acked-by: Alexander Sverdlin
> ---
> drivers/gpio/gpio-ep93xx.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpio
Hi!
On Wed, 2021-01-27 at 13:46 +0300, Nikita Shubin wrote:
> As ->to_irq is redefined in gpiochip_add_irqchip, having it defined
> in
> driver is useless, so let's drop it.
>
> Signed-off-by: Nikita Shubin
Reviewed-by: Alexander Sverdlin
> ---
> drivers/gpio/gpio-
Hi!
On Wed, 2021-01-27 at 13:46 +0300, Nikita Shubin wrote:
> - use predefined constants instead of plain numbers
> - use provided bank IRQ number instead of defined constant
> for port F
>
> Signed-off-by: Nikita Shubin
Reviewed-by: Alexander Sverdlin
> ---
> drive
>ic[port];
> }
>
> - if (bank->has_irq) {
> - err = ep93xx_gpio_add_ab_irq_chip(pdev, girq, bank-
> >irq_base);
> + if (bank->idx == EP93XX_GPIO_A_PORT_INDEX ||
> + bank->idx == EP93XX_GPIO_B_PORT_INDEX) {
> + err = ep93xx_gpio_add_ab_irq_chip(pdev, gc, bank-
> >irq_base);
> if (err)
> return err;
> }
>
> /* Only bank F has especially funky IRQ handling */
> - if (bank->has_hierarchical_irq) {
> - err = ep93xx_gpio_add_f_irq_chip(pdev, girq, bank-
> >irq_base);
> + if (bank->idx == EP93XX_GPIO_F_PORT_INDEX) {
> + err = ep93xx_gpio_add_f_irq_chip(pdev, gc, bank-
> >irq_base);
> if (err)
> return err;
> }
--
Alexander Sverdlin.
y wake more
interest from maintainers side.
Of course I can re-send them because I personally re-base them regularly.
--
Best regards,
Alexander Sverdlin.
h "Fixes:" tag corrected, you can put my
Reviewed-by: Alexander Sverdlin
> Signed-off-by: Menglong Dong
> ---
> arch/mips/cavium-octeon/octeon-irq.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/cavium-octeon/octeon-irq.c
>
access of MDR1. After removing the
read access from omap_8250_mdr1_errataset() the data corruption never
happened any more.
Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Cc: sta...@vger.kernel.org
Signed-off-by: Ale
s390-linux-ld: drivers/char/hw_random/ks-sa-rng.o: in function
>> `ks_sa_rng_probe':
>>>> ks-sa-rng.c:(.text+0x2fa): undefined reference to
>>>> `devm_platform_ioremap_resource'
>
> ---8<---
> This patch adds a dependency for KEYSTONE on HAS_IOMEM and OF
ims
the rest of the last page,
and I'm going to fix this).
--
Best regards,
Alexander Sverdlin.
Hello Serge, Thomas,
On 13/11/2020 10:17, Alexander Sverdlin wrote:
>> So IMHO what could be the best conclusion in the framework of this patch:
>> 1) As Thomas said any platform-specific reservation should be done in the
>> platform-specific code. That means if octeon needs
atforms this patch is required for?
--
Best regards,
Alexander Sverdlin.
at's why we only noticed recently, that
is breaks Octeon platform.
--
Best regards,
Alexander Sverdlin.
eck_kernel_sections_mem() method can be removed. But it
> should be done carefully. We at least need to try to find all the
> platforms, which rely on its functionality.
Thanks for looking into this! I agree with your analysis, I'll try to rework,
removing check_kernel_sections_mem().
--
Best regards,
Alexander Sverdlin.
em()).
As I understood, the issue is that memblock API operates internally on the
page granularity (at least there are many ROUND_DOWN() inside for the size
or upper boundary), so for request_resource() to success one has to claim
the rest of the .bss last page. And with current memblock API
memblock_reserve() must appear somewhere, being this ARCH or platform code.
--
Best regards,
Alexander Sverdlin.
Hi Thomas,
On 09/11/2020 11:34, Alexander Sverdlin wrote:
>>> Linux doesn't own the memory immediately after the kernel image. On Octeon
>>> bootloader places a shared structure right close after the kernel _end,
>>> refer to "struct cvmx_bootinfo *octeon_bo
emblock
allocator and re-used somewhere in Linux is in MIPS-generic
check_kernel_sections_mem().
I personally will be fine with repairing Octeon only as I don't have other MIPS
targets to care about, but maybe someone else in the MIPS community will find
this fix useful...
--
Best regards,
Alexander Sverdlin.
Hello Wang!
On Fri, 2020-11-06 at 09:46 +0800, Wang Qing wrote:
> The input parameter of clk_get_rate() is checked with IS_ERR(),
> so here we need to check null on clk.
Thank you for the patch!
> Signed-off-by: Wang Qing
Acked-by: Alexander Sverdlin
> ---
> arch/arm/mach-ep9
Hello Tudor,
On 07/10/2020 10:48, tudor.amba...@microchip.com wrote:
>> From: Alexander Sverdlin
>>
>> spi_nor_parse_sfdp() modifies the passed structure so that it points to
>> itself (params.erase_map.regions to params.erase_map.uniform_region). This
>> makes i
Hello Tudor,
On 22/07/2020 19:03, tudor.amba...@microchip.com wrote:
> On 7/22/20 7:37 PM, Alexander Sverdlin wrote:
[...]
>> I've performed my testing as well and got the following results:
>>
>> Vanilla Linux 4.9 (i.e. before the introduction of the offending
>> pat
gt; sense for WRDI.
>>>>
>>>> Cc: sta...@vger.kernel.org
>>>> Fixes: bce679e5ae3a ("mtd: spi-nor: Check for errors after each Register
>>>> Operation")
>>>> Signed-off-by: Alexander Sverdlin
>>>> ---
>>>&
42880 bytes (5.2 MB, 5.0 MiB) copied, 3.90503 s, 1.3 MB/s
Therefore it looks good from my PoV:
Tested-by: Alexander Sverdlin
> Signed-off-by: Luis Alberto Herrera
> Acked-by: Mika Westerberg
> ---
> drivers/mtd/spi-nor/controllers/intel-spi.c | 4 ++--
> 1 file changed, 2 inserti
From: Alexander Sverdlin
After spi_nor_write_disable() return code checks were introduced in the
spi-nor front end intel-spi backend stopped to work because WRDI was never
supported and always failed.
Just pretend it was sucessful and ignore the command itself. HW sequencer
shall do the right
; watchdog_core_data and cdev")
> Reviewed-by: Guenter Roeck
Reviewed-by: Alexander Sverdlin
> Signed-off-by: Krzysztof Sobota
> ---
> v1 -> v2:
> * removed Change-Id tag
> * added Review-by tag
> v2 -> v3
> * convert spaces to tabs
> * convert (hopeful
line:
> If doesn't contain `\bxmlns\b`:
> For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
> If both the HTTP and HTTPS versions
> return 200 OK and serve the same content:
> Replace HTTP with HTTPS.
>
> Signed-off-by: Alexa
__sys_sendmsg+0x63/0xa0
__sys_sendmsg+0x63/0xa0
do_syscall_64+0x6c/0x1e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
I would appreciate any hint, how to approach this problem! I can try to come up
with a patch,
but as this is so central thing in the IP protocol, I'd like to hear some
opinions first...
--
Best regards,
Alexander Sverdlin.
^^^
>> Previous patch (selecting IRQ_DOMAIN_HIERARCHY) is not
>> required.
>>
>> If you re-spin all 3 ep93xx-relevant patches together, you can put my
>> Tested-by: Alexander Sverdlin
>> on them.
> Awesome, thanks for testing.
>
> I o
>
> Ah, that makes sense. so all interrupt numbers need to
> be shifted by a fixed number (e.g. 1) like we did for
> other platforms (see attachment).
Yes, the below patch resolved both GPIO and DMA issues.
Previous patch (selecting IRQ_DOMAIN_HIERARCHY) is not
required.
If yo
nd VIC code
itself, which assumes 0 means "auto assignment" (refer
to vic_init()).
But there are more problems I didn't resolve yet.
--
Alexander Sverdlin.
what else is needed
> here or if this is correct at all.
>
> Cc: Hartley Sweeten
> Cc: Alexander Sverdlin
> Cc: Hubert Feurstein
> Cc: Lukasz Majewski
> Signed-off-by: Arnd Bergmann
> ---
> arch/arm/Kconfig | 2 ++
> arch/arm/mac
is
modified in accordance with what GCC is expecting to find.
Reported-by: kbuild test robot
Acked-by: Alexander Sverdlin
Signed-off-by: Gustavo A. R. Silva
---
arch/arm/mach-ep93xx/crunch.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-ep93xx/crunch.c b/arch/arm/mach
Hi!
On 15/04/2019 21:47, Arnd Bergmann wrote:
>>> We can communicate the clock rate using platform data rather than setting a
>>> flag to use a particular value in the driver, which is cleaner and avoids
>>> the dependency.
>>>
>>> No platform in the kernel currently defines the ep93xx keypad
On 15/04/2019 21:31, Arnd Bergmann wrote:
> gpio-ep93xx.h, hardware.h, and platform.h are only used in
> arch/arm/mach-ep93xx, so we can move them one there and no
> longer expose them to device drivers.
Acked-by: Alexander Sverdlin
> Signed-off-by: Arnd Bergmann
> ---
> ar
include/linux/soc/. This is far from great, but gets the job
> done here, without the need for a proper pinctrl driver.
Acked-by: Alexander Sverdlin
> Signed-off-by: Arnd Bergmann
> ---
> arch/arm/mach-ep93xx/clock.c | 1 +
> arch/arm/mach-ep93xx/core.c
; + case SEEK_CUR:
> + /* For compatibility with userspace expecting SEEK_CUR
> + * to not yield EINVAL. */
> + ret = -ESPIPE;
> + break;
> default:
> ret = -EINVAL;
> }
>
> Either makes dprintf work, but is either the right solution?
>
> Thanks.
>
> Mike.
--
Alexander Sverdlin.
+ bool "Support Simplemachines Sim.One board"
> + help
> + Say 'Y' here if you want your kernel to support the
> + Simplemachines Sim.One board.
>
> config MACH_SNAPPER_CL15
> bool "Support Bluewater Systems Snapper CL15 Module"
For EP93xx
Hello Oleksij,
On Thu, 10 Jan 2019 11:12:32 +0100
Oleksij Rempel wrote:
> sched_priority = 1 is enough to dramatically reduce latency
> on have system load produced by tasks with default user space prio.
>
> Signed-off-by: Oleksij Rempel
Tested-by: Alexander Sverdlin
> ---
ond high-priority kthread worker.
>
> Even without a second worker this patch allows to give a higher priority
> to tty processing by modifying the priority of the corresponding
> kthread.
>
> Signed-off-by: Steven Walter
> Tested-by: Oleksij Rempel
Tested-by: Alex
Hello Oleksij,
On Thu, 10 Jan 2019 11:12:30 +0100
Oleksij Rempel wrote:
> From: Steven Walter
>
> Preparation for converting to kthread_worker
>
> Signed-off-by: Steven Walter
> Tested-by: Oleksij Rempel
Tested-by: Alexander Sverdlin
> ---
> drive
On 17/01/2019 15:37, Brajeswar Ghosh wrote:
> Remove mach/gpio-ep93xx.h which is included more than once
>
> Signed-off-by: Brajeswar Ghosh
Acked-by: Alexander Sverdlin
Arnd, would you take it into one of your ARM trees?
> ---
> arch/arm/mach-ep93xx/ts72xx.c | 1 -
>
d if any adjustment
> needs to be done to the tools/{include,arch}/ copies.
>
> Cc: Adrian Hunter
> Cc: Alexander Sverdlin
> Cc: David Ahern
> Cc: Jiri Olsa
> Cc: Namhyung Kim
> Cc: Wang Nan
> Link: https://lkml.kernel.org/n/tip-y1sqyydvfzo0bjjoj4zsl...@gi
d if any adjustment
> needs to be done to the tools/{include,arch}/ copies.
>
> Cc: Adrian Hunter
> Cc: Alexander Sverdlin
> Cc: David Ahern
> Cc: Jiri Olsa
> Cc: Namhyung Kim
> Cc: Wang Nan
> Link: https://lkml.kernel.org/n/tip-y1sqyydvfzo0bjjoj4zsl...@gi
Hi!
On 09/10/2018 02:54, Arnaldo Carvalho de Melo wrote:
> From: Arnaldo Carvalho de Melo
>
> The auxtrace.h header references BITS_PER_LONG without including the
> header where it is defined, getting it by luck from some other header,
> fix it.
>
> Cc: Adrian Hunter
>
Hi!
On 09/10/2018 02:54, Arnaldo Carvalho de Melo wrote:
> From: Arnaldo Carvalho de Melo
>
> The auxtrace.h header references BITS_PER_LONG without including the
> header where it is defined, getting it by luck from some other header,
> fix it.
>
> Cc: Adrian Hunter
>
Hello Arnaldo,
>>>> Em Wed, Sep 12, 2018 at 07:02:32PM +0200, Alexander Sverdlin escreveu:
>>>>> CC .../tools/objtool/builtin-check.o
>>>>> ...
>>>>> In file included from
>>>>> .../tools/arch/x86/include/uapi/a
Hello Arnaldo,
>>>> Em Wed, Sep 12, 2018 at 07:02:32PM +0200, Alexander Sverdlin escreveu:
>>>>> CC .../tools/objtool/builtin-check.o
>>>>> ...
>>>>> In file included from
>>>>> .../tools/arch/x86/include/uapi/a
t not opposite.
> I'll try and get one for building a x86_64 tools/perf,
> tools/lib/{api,bpf,traceevent} to see if I manage to reproduce the
> problem you're reporting.
--
Best regards,
Alexander Sverdlin.
t not opposite.
> I'll try and get one for building a x86_64 tools/perf,
> tools/lib/{api,bpf,traceevent} to see if I manage to reproduce the
> problem you're reporting.
--
Best regards,
Alexander Sverdlin.
On 12/09/2018 21:21, Arnaldo Carvalho de Melo wrote:
> Em Wed, Sep 12, 2018 at 04:01:07PM -0300, Arnaldo Carvalho de Melo escreveu:
>> Em Wed, Sep 12, 2018 at 07:02:32PM +0200, Alexander Sverdlin escreveu:
>>> CC .../tools/objtool/builtin-check.o
>>> ..
On 12/09/2018 21:21, Arnaldo Carvalho de Melo wrote:
> Em Wed, Sep 12, 2018 at 04:01:07PM -0300, Arnaldo Carvalho de Melo escreveu:
>> Em Wed, Sep 12, 2018 at 07:02:32PM +0200, Alexander Sverdlin escreveu:
>>> CC .../tools/objtool/builtin-check.o
>>> ..
test building all tools in tools/
>
> This broke make -C tools/perf/
I agree, this brakes perf, so we need to work further on that...
--
Best regards,
Alexander Sverdlin.
test building all tools in tools/
>
> This broke make -C tools/perf/
I agree, this brakes perf, so we need to work further on that...
--
Best regards,
Alexander Sverdlin.
]
#define BITS_PER_LONG (__CHAR_BIT__ * __SIZEOF_LONG__)
Include instead as other headers do.
Signed-off-by: Alexander Sverdlin
---
Seen during x86_64 build. Seems that most of the compilers do not define
__SIZEOF_LONG__, but my does.
tools/include/linux/bitops.h | 5 +
1 file changed, 1
]
#define BITS_PER_LONG (__CHAR_BIT__ * __SIZEOF_LONG__)
Include instead as other headers do.
Signed-off-by: Alexander Sverdlin
---
Seen during x86_64 build. Seems that most of the compilers do not define
__SIZEOF_LONG__, but my does.
tools/include/linux/bitops.h | 5 +
1 file changed, 1
; defer probe, instead of assuming it.
>
> Fixes: c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ")
> Signed-off-by: John Garry
This indeed looks like a proper way to handle both cases:
Reviewed-by: Alexander Sverdlin
Tested-by: Alexander Sverdlin
&g
; defer probe, instead of assuming it.
>
> Fixes: c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ")
> Signed-off-by: John Garry
This indeed looks like a proper way to handle both cases:
Reviewed-by: Alexander Sverdlin
Tested-by: Alexander Sverdlin
&g
apidIO IP block will need to "select HAS_RAPIDIO"
> in the platform-/machine-specific "config ARCH_*" Kconfig entry.
>
> Cc: Andrew Morton
> Cc: Alexander Sverdlin
> Cc: John Paul Walters
> Cc: linux-m...@linux-mips.org
> Cc: linux-kernel@vger.kernel.org
&
apidIO IP block will need to "select HAS_RAPIDIO"
> in the platform-/machine-specific "config ARCH_*" Kconfig entry.
>
> Cc: Andrew Morton
> Cc: Alexander Sverdlin
> Cc: John Paul Walters
> Cc: linux-m...@linux-mips.org
> Cc: linux-kernel@vger.kernel.org
&
port_dma_req structure members are initialized in
> rio_dma_transfer() immediately after the request structure gets
> allocated.
>
> Signed-off-by: Ioan Nicu <ioan.nicu....@nokia.com>
Tested-by: Alexander Sverdlin <alexander.sverd...@nokia.com>
> ---
> drivers/rapidio/devices
port_dma_req structure members are initialized in
> rio_dma_transfer() immediately after the request structure gets
> allocated.
>
> Signed-off-by: Ioan Nicu
Tested-by: Alexander Sverdlin
> ---
> drivers/rapidio/devices/rio_mport_cdev.c | 19 +--
> 1 file change
1 - 100 of 318 matches
Mail list logo
