Try mkraid --really-force /dev/md0
Im sure it will work.
Greetings, Dietmar
- Ursprüngliche Nachricht -
Absender: [EMAIL PROTECTED]
Betreff: help!
Empfänger: [EMAIL PROTECTED]
Datum: 09. Apr 1999 05:41
Help! im lost, finaly have found the new howto on ftp.fi.kernel.org after days
of
Chris Chabot wrote:
Help! im lost, finaly have found the new howto on ftp.fi.kernel.org after days
of dispair and old documentation... tried the new tools ... nada ... tried
kernel patches ... busted kernel 2.2.5 ...
My problem is this ... i created the /etc/raidtools (modified example
Hi guys,
I'm sorry for the off-topic subject, but I'm having this weird problem that
locks up the console's keyboard.
What could conceivably lock out the keyboard upon boot-up?
I have a Stampede Linux installation that works fine. Worked fine with 2.0.36
kernel. However, if I try to boot up
Hi,
does somebody have a lilo.conf sample on how do this.
I am having problems with mounting the root file system.
- Alex
- Did you marked the raid partitions as type 'fd'? (stop the raid
before doing that)
I asked this question some time ago, but get no answer: how to mark them as
type fd?
Can you send the whole command line?
Thanks, Dietmar
Hello...
I had a raid0 set where one of the drives started going bad. The raid
is for a usenet feed. I took the raid down, took out the bad drive and
remade it with the 3 remaining drives. I works but the autodetect still
wants 4 drives.
kernel 2.2.3
latest raid015 patches
latest
I asked this question some time ago, but get no answer: how to mark them as
type fd?
Can you send the whole command line?
Thanks, Dietmar
You need to use fdisk... the process is usually something like this:
rootprompt# fdisk /dev/sda
Then use the 't' command to change the partition's system
I asked this question some time ago, but get no answer: how to mark them as
type fd?
Just run fdisk and change the type to fd manually (it will complain that
this is an unknown type). There is no "whole command line" (to run fdisk
type "fdisk"
Rgds, Till
you cant boot off of a raid partition. lilo needs to find the kernel on the
disk using bios routines. raid is not in bios.
you need to create a ~20 meg partition to hold the kernel, etc.
this works very well at redhat install time to create a /boot and /boot2
folder on the first and second
Tried using linux 2.2.5 w/o patches, mkraid aborts attempting to open
/dev/md0 for read-only.
Tried to patch with raid0145-1990309-2.2.3 -- OK, backed off to linux
2.2.3, and tried again, well, neither will build because there is no
linux/md.h.
Suggestions? I must be missing something really
Basically: to get improved Read performance because of mirrored-disks,
DO I NEED 2 SCSI CARDS? Or will the command queueing/SCSI subsystem still
give me a benefit?
Right now I'm assuming 2 separate cards is better
You can get increased read performance with both drives on one scsi
On Wed, 31 Mar 1999, Tony Wildish wrote:
Try booting with the 'mem=xxxM' option to limit yourself to a small
amount of RAM. If you are lucky then the problem is high enough in the
memory that you can limit yourself to a good region and it will work.
There's also a memtest86 utility that
12 matches
Mail list logo