> on the /dev/md2 raid volume, the /dev/sdb3 partition keeps getting
> marked as failed. This happens consistently after about 1.5-2 days of use.
> /dev/md2 is where I mount /usr/local on this system, which houses apache
> and openldap, so I don;t think it is a cron job, or burst of activity that
My apologies to Brian and the rest of the list.
I was way off base while discussing U2W and LVD. I had confussed the
knowledge I had about U3W and thought that LVD only applied to 160MB/s.
Chris
This crow doesn't taste very good.
> From [EMAIL PROTECTED] Wed Apr 19 21:07:22 2000
>
> I was wondering if anyone here knew the status on the drivers for the
> Mylex ExtremeRaid 2000 card. Are they in beta yet?
>
> In the next 1-2 months I'm going to need a new raid card and could really
> use the 2000 over the 1100. (need th
I was wondering if anyone here knew the status on the drivers for the
Mylex ExtremeRaid 2000 card. Are they in beta yet?
In the next 1-2 months I'm going to need a new raid card and could really
use the 2000 over the 1100. (need the additional scsi channel).
Steve
OK, I took all your advice and returned the Adaptec AAA131U2 controller back and
got a Mylex Acceleraid 150 (w/16 MB). I've run the BIOS raid configuration and
it sees all my drives and has created a logical drive.
However, when I boot into linux, I'm not sure where to find this drive. Most
d
Sorry for the typo.
The previous description of method a) is not working.
"mount /dev/md0" would get error; "fsck /dev/md0" also
gives error message.
But it seems there's a way to fix it.
I did a experiment using /dev/hda8 and /dev/hda8(this
one has data) to make raid-1 device, /dev/md0.
Here a
I'm running 2-2-15.pre18 with the 2.2.14 raid patches with no problem. I
was running an 2940U2W and have just recently upgraded to an Ultra 160.
I've been running with the 2940 then the Ultra 160 in this mode for two
months with no lockups. RAID will stress the hell out of the SCSI bus and
find
Ok, normally I'd not bother with this kind of message, but Brian (Haymore)
has been both nice and helpful in my experience, so I'm going to do a
little sticking up for him since he's being uselessly railed on :)
Note that I specifically hate flaming that doesn't get taken off-list,
but as I corre
Am 19.04.2000 10:44:06 schrieb owner-linux-raid:
> [EMAIL PROTECTED] wrote:
> >
> > On Tue, 18 Apr 2000, Chris Mauritz wrote:
> >
> > > Also, make sure you have active (not passive) termination.
> >
> > Since I am no SCSI guru, can someone please explain, how to determine
> > which is active and
On Tue, Apr 18, 2000 at 04:31:15PM +, [EMAIL PROTECTED] wrote:
> Hi All!
>
> Lately, we have been experiencing some serious problems with our
> Linux servers using RAID0 on Adaptec 2940U2W. The machines, which
> are under quite some load, suddenly dies and must be
> cold-restarted. When they
10 matches
Mail list logo
