From: Thomas Abraham thomas...@samsung.com
All the S5P series SoCs use the 'struct clksrc_clk' type to represent the
armclk. So the clk_arm clock instance available in the plat-s5p clock code
is not used in any of the S5P series SoCs.
This patch removes the unused clk_arm instance from plat-s5p
On Tue, Sep 28, 2010 at 2:55 PM, Kukjin Kim kgene@samsung.com wrote:
최규호 wrote:
Hi,
Welcome to Linux mainline ;-)
I have some comments about your patches.
Firstly could you please use English character in the representing name in
e-mail client not Korean character :-)
And make sure
Marek Szyprowski wrote:
Add required platform definitions for MMC power regulators on Samsung
Goni board. GPIO pin GONI_EXT_FLASH_EN has been transferred from machine
startup code to fixed voltage regulator.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin
Marek Szyprowski wrote:
Since commit 67a38950f0917aecfe1a3e46720d8bbb0020 there is no need
to set pixel clock for the s3c-fb driver's window information.
The correct pixel clock value can be automatically calculated from
the other screen parameters. This patch removes the redundant pixel
Marek Szyprowski wrote:
Add required platform definitions for S6E63M0 LCD controller on Samsung
Goni board.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/mach-goni.c | 71
Marek Szyprowski wrote:
Add required platform definitions for si470x radio device on Samsung
Goni board.
Signed-off-by: Joonyoung Shim jy0922.s...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
Marek wrote:
Add the necessary definitions and mapping information to enable the
s3c-hsotg gadget to build.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
s5pv210 otg
Maybe miss typing? ;-)
---
Marek Szyprowski wrote:
Add required platform definitions for s3c-hsotg driver to enable usb
gadget support on Samsung Goni board.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/Kconfig |1
Kukjin Kim wrote:
Kyungmin Park wrote:
Do you check the DVS feature?
It can support the DVS by GPIOs and platform can set the each voltages
at
each mode.
Ok...I agree about the feature's necessity that you said.
However, we don't need separate driver which has same/similar
On Tue, Sep 28, 2010 at 4:58 PM, Kukjin Kim kgene@samsung.com wrote:
Kukjin Kim wrote:
Kyungmin Park wrote:
Do you check the DVS feature?
It can support the DVS by GPIOs and platform can set the each voltages
at
each mode.
Ok...I agree about the feature's necessity that you
On Tue, Sep 28, 2010 at 2:55 PM, Kukjin Kim kgene@samsung.com wrote:
최규호 wrote:
Hi,
Welcome to Linux mainline ;-)
I have some comments about your patches.
Firstly could you please use English character in the representing name in
e-mail client not Korean character :-)
And make sure
Hello,
On Tuesday, September 28, 2010 9:39 AM wrote:
Marek Szyprowski wrote:
Add required platform definitions for S6E63M0 LCD controller on Samsung
Goni board.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Hello.
On 28-09-2010 5:31, Kukjin Kim wrote:
From: Changhwan Younchaos.y...@samsung.com
It is reported by Junseok Jung that using clz instruction is
better instead of using for-loop to find the interrupt source.
This patch modifies interrupt source searching code using __fls().
The __fls()
Hello,
On Tuesday, September 28, 2010 9:44 AM Kukjin Kim wrote:
Marek Szyprowski wrote:
Add required platform definitions for si470x radio device on Samsung
Goni board.
Signed-off-by: Joonyoung Shim jy0922.s...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Add required platform definitions for S6E63M0 LCD controller on Samsung
Goni board.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Changes since v2:
- removed defines for lcd pin names
arch/arm/mach-s5pv210/mach-goni.c | 66
Marek Szyprowski wrote:
This patch adds common code to enable support of gpio interrupts on s5p
series.
The total number of gpio pins is quite large on s5p series. Registering
irq support for all of them would be a resource waste. Because of that
the interrupt support for standard gpio
Michal Nazarewicz wrote:
Hi :-)
On Tue, 28 Sep 2010 14:45:59 +0200, Sergei Shtylyov sshtyl...@mvista.com
wrote:
Hello.
On 28-09-2010 5:31, Kukjin Kim wrote:
From: Changhwan Younchaos.y...@samsung.com
It is reported by Junseok Jung that using clz instruction is
better instead
Hello,
On Tuesday, September 28, 2010 4:04 PM Kukjin Kim wrote:
Marek Szyprowski wrote:
This patch adds common code to enable support of gpio interrupts on s5p
series.
The total number of gpio pins is quite large on s5p series. Registering
irq support for all of them would be a
Hi Marek,
On Sep 28, 2010 11:24 PM, Marek Szyprowski
m.szyprow...@samsung.com wrote: Hello,
On Tuesday, September 28, 2010 4:04 PM Kukjin Kim wrote:
Marek Szyprowski wrote:
This patch adds common code to enable support of gpio interrupts on s5p
series.
The total number of gpio pins
On Tue, Sep 28, 2010 at 06:23:24PM +0900, Kukjin Kim wrote:
From: Seungwhan Youn sw.y...@samsung.com
This patch fixes EPLL_CON MASK settings which did not contain its
shift values when set epll rate on S5PC100.
Signed-off-by: Seungwhan Youn sw.y...@samsung.com
Signed-off-by: Kukjin Kim
Kyungmin Park wrote:
From: Kyungmin Park kyungmin.p...@samsung.com
In case of s5pc110 CPU. It uses the SPARSEMEM as default memory
configuration.
So move to ARCH_S5PV210 config.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/Kconfig |1 +
Kyungmin Park wrote:
From: Kyungmin Park kyungmin.p...@samsung.com
In case of s5pc210 CPU. It uses the SPARSEMEM as default memory
configuration
So move to ARCH_S5PV310 config.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/Kconfig |1 +
Kyungmin Park wrote:
From: Kyungmin Park kyungmin.p...@samsung.com
As it's default configuration for each SoC, Move to the machine config.
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/Kconfig |3 +++
arch/arm/mach-s5pc100/Kconfig |1 -
Hello,
On Tuesday, September 28, 2010 4:05 PM Kukjin Kim wrote:
On Tuesday, September 28, 2010 9:44 AM Kukjin Kim wrote:
Marek Szyprowski wrote:
Add required platform definitions for si470x radio device on Samsung
Goni board.
Signed-off-by: Joonyoung Shim
24 matches
Mail list logo
