> I am a newbie, using Linux since about 1 month. I have been using FC
> 2.6.5-1.358smp kernel
> with a USB printer (HP LJ 1500). This worked well until I switched to
> the new kernel ... the most recent kernel I try is FC 2.6.8-1.521smp.
> For some reason, the new system does not "see" USB printer
Hi,
I am a newbie, using Linux since about 1 month. I have been using FC
2.6.5-1.358smp kernel
with a USB printer (HP LJ 1500). This worked well until I switched to
the new kernel ... the most recent kernel I try is FC 2.6.8-1.521smp.
For some reason, the new system does not "see" USB printer devi
I installed HP LasetJet 1000 printer to my RedHat 7.3
fresh installation. I use CUPS 1.1.14 .rpm, it's
working fine with HP LaserJet 4L via parallel port.
CUPS detected that usb printer on /dev/usb/lp0, and
installed properly.
But, if I print a test page, there was error :
usb-uhci.c: interrupt
Hi Derrick,
I don't know if this will be your problem or not (output of
cat /proc/bus/usb/devices might explain if it is) but you might need the
tools at;
http://hpoj.sourceforge.net/
regards,
Hi, I have a strange problem. I'm running RedHat 7.1 2.4.2-9 kernel (I
know I need to compile a new kernel), and I'm getting a strange problem
when I plug in a HP OfficeJet D135 Multi-Function USB Printer.
If I look at the logs every thing appears to be detected properly, the
usb drivers are loa
> > Hi !
> >
> > I have connect a centronics port printer HP 550C to a USB Data Switch
> > from
> >
> > Hama (Model USB-201).
> >
> > After insmod of kernel modules uss720 and printer i get the messages:
>
> you probably want USB printer support, not the uss720 (which is a
> parport interface).
Dirk Vornheder wrote:
>
> Hi !
>
> I have connect a centronics port printer HP 550C to a USB Data Switch from
>
> Hama (Model USB-201).
>
> After insmod of kernel modules uss720 and printer i get the messages:
you probably want USB printer support, not the uss720 (which is a
parport interface)
Hi !
I have connect a centronics port printer HP 550C to a USB Data Switch from
Hama (Model USB-201).
After insmod of kernel modules uss720 and printer i get the messages:
Mar 7 19:21:18 PCNEU kernel: 0x378: FIFO is 16 bytes
Mar 7 19:21:18 PCNEU kernel: 0x378: writeIntrThreshold is 16
Mar
