On 04/12/03 10:44, Joel Hammer wrote:
No, I didn't. But, I did go back and remove that offending module from the
list to compile. Things now are going OK.
I guess there was just a bug in that source code for that module. But since
it is just a low level scsi driver, hopefully it won't bother
I accepted all the defaults of .config, which looks to compile every
module possible. All the other modules compiled without trouble.
Joel
that module is not just for PCI based controllers, its also for some
onboard controllers for some intel mobos. i've used that module in the
past, so
All the defaults from which .config?
On 04/12/03 13:50, Joel Hammer wrote:
I accepted all the defaults of .config, which looks to compile every
module possible. All the other modules compiled without trouble.
Joel
that module is not just for PCI based controllers, its also for some
onboard
On Sat, 12 Apr 2003 15:30:51 -0400
Joel Hammer [EMAIL PROTECTED] wrote:
I seem to have hosed my system.
After rebuilding the kernel, I guess I ought to have run lilo again,
for the umpteemth time, which I didn't bother doing.
Now when I try to boot, no matter which image I use, it just
Hi everyone.
I have an ECS K7SEM board and I would like to use its on-board modem (pctel
Amr).
Someone know how to do it works ?
I have a Conectiva Linux 8.0 - Kernel 2.14.18
Thanks.
Bruno Vieira
___
Linux-users mailing list
[EMAIL PROTECTED]
It seemed that even as root, I couldn't do things easily from a virtual
console. I was really nonplussed at the problem of lilo not being able to access
/dev/hda after chroot.
I wanted to then alter the lilo.conf that comes with knoppix, hoping I could
change it to what I needed to boot my
I have an ATHLON 1700 XP and a ECS K7SEM board. So, sometimes the system
suddenly crashes.
Conectiva Linux 8.0 - kernel -2.4.18
Thank you.
Bruno Vieira
___
Linux-users mailing list
[EMAIL PROTECTED]
Unsubscribe/Suspend/Etc -
One trick I found with Knoppix is once you get a prompt do an su -. After
that you are really root and can do what you need - assuming you mount
stuff rw.
Joel Hammer wrote:
Fudgetta bout it.
For reasons unclear, my old kernel seems to be blown away, too.
So, I have to reinstall lindows.
2.4.20-xfs-r2 under Gentoo.
Joel Hammer wrote:
Which version of the kernel are you using? I was compiling 2.4.20.
Joel
On Sat, Apr 12, 2003 at 03:35:23PM -0400, Brett I. Holcomb wrote:
I think it's something on yoiur system. I'm using the module on another
system and it works fine - no
Knoppix mounts all the disk partitions read only, co you have to remount
/dev/hda in r/w mode.
This really confuses me.
/dev/hda is not a directory or even a partition. It is the boot sector of
the first hard drive. I could not see how to mount that r/w or how that
would help me.
When you
sorry i typed 2.14.18 but it´s a 2.4.18 kernel
thaks again.
Bruno Vieira [EMAIL PROTECTED] escreveu na mensagem
news:[EMAIL PROTECTED]
Hi everyone.
I have an ECS K7SEM board and I would like to use its on-board modem
(pctel
Amr).
Someone know how to do it works ?
I have a Conectiva Linux
On 04/12/03 15:26, Bruno Vieira wrote:
Hi everyone.
I have an ECS K7SEM board and I would like to use its on-board modem (pctel
Amr).
Someone know how to do it works ?
I have a Conectiva Linux 8.0 - Kernel 2.14.18
See the SxS that i wrote for PCTel (win)modems.
--
On 04/12/03 15:31, Joel Hammer wrote:
It seemed that even as root, I couldn't do things easily from a virtual
console. I was really nonplussed at the problem of lilo not being able to access
/dev/hda after chroot.
I wanted to then alter the lilo.conf that comes with knoppix, hoping I could
change
Bruno Vieira wrote:
I have an ATHLON 1700 XP and a ECS K7SEM board. So, sometimes the system
suddenly crashes.
Conectiva Linux 8.0 - kernel -2.4.18
Thank you.
Bruno Vieira
Details?
And you are running X, which window manager, gdm/kdm, what programs,
video card, etc?
Is there a log in
Bruno Vieira wrote:
sorry i typed 2.14.18 but it´s a 2.4.18 kernel
thaks again.
Bruno Vieira [EMAIL PROTECTED] escreveu na mensagem
news:[EMAIL PROTECTED]
Hi everyone.
I have an ECS K7SEM board and I would like to use its on-board modem
http://www.linmodems.org/
might help
On 04/12/03 15:32, Bruno Vieira wrote:
I have an ATHLON 1700 XP and a ECS K7SEM board. So, sometimes the system
suddenly crashes.
Conectiva Linux 8.0 - kernel -2.4.18
Care to elaborate? How does it crash? Is it easily reproducable? Did
this suddenly start happening for no apparent reason, or
Net Llama! wrote:
There's nothing wrong with Knoppix.
Have you tried 3.2? If so, is it worth the download? Are the changes
significant?
___
Linux-users mailing list
[EMAIL PROTECTED]
Unsubscribe/Suspend/Etc -
How is that done?
Right clicking on icons only helps for partitions.
/dev/hda is the boot sector of the first hard drive. How can that be made
r/w?
Joel
On Sat, Apr 12, 2003 at 03:53:00PM -0700, Net Llama! wrote:
It would if you had remounted your / filesystem read-write. There's
nothing
Joel Hammer wrote:
How is that done?
Right clicking on icons only helps for partitions.
/dev/hda is the boot sector of the first hard drive. How can that be made
r/w?
Why do you want to write to the mbr? Don't you need to find your
lilo.conf and edit it? Or is it that you need to run
On Sat, 12 Apr 2003 15:30:51 -0400
Joel Hammer [EMAIL PROTECTED] wrote:
I seem to have hosed my system.
After rebuilding the kernel, I guess I ought to have run lilo again,
for the umpteemth time, which I didn't bother doing.
Now when I try to boot, no matter which image I use, it just
On Sat, 12 Apr 2003 18:36:06 -0400
Joel Hammer [EMAIL PROTECTED] wrote:
Knoppix mounts all the disk partitions read only, co you have to
remount/dev/hda in r/w mode.
This really confuses me.
/dev/hda is not a directory or even a partition. It is the boot sector
of the first hard drive.
On Sat, 12 Apr 2003 15:30:51 -0400
Joel Hammer [EMAIL PROTECTED] wrote:
I seem to have hosed my system.
After rebuilding the kernel, I guess I ought to have run lilo again,
for the umpteemth time, which I didn't bother doing.
Now when I try to boot, no matter which image I use, it just
from your previous description, it sounds like you didn't have any
kernels in /boot that coresponded with the contents of lilo.conf. that
has nothing to do with Knoppix.
On 04/12/03 16:07, Joel Hammer wrote:
How is that done?
Right clicking on icons only helps for partitions.
/dev/hda is the
Hi Guys,
I am trying to get FAAD built so I can view ACC/Sorensen AVI files under MPlayer.
I've build and installed the requisite libsndtools, but FAAD2 is giving me fits. I
have the latest Automake and AutoConfig as well as libtools, but no joy.
I'm including the error text from the
On 04/12/03 19:05, Shawn Tayler wrote:
Hi Guys,
I am trying to get FAAD built so I can view ACC/Sorensen AVI files under MPlayer. I've build and installed the requisite libsndtools, but FAAD2 is giving me fits. I have the latest Automake and AutoConfig as well as libtools, but no joy.
I'm
Thanks Lonnie.
I guess its back to Xine!
Shawn
On Sat, 12 Apr 2003 19:13:20 -0700 Net Llama! [EMAIL PROTECTED] professed:
I went through this hell yesterday afternoon. To make a very long story
short, i ended up checking faad2 out of cvs, and that built without any
special voodoo. All
26 matches
Mail list logo
