[Linuxptp-users] Configure PTP4L through multiple NICs

Hello, I am trying to have my device receive PTP from a master clock from one NIC and output it through another NIC. >From my understanding, I need to set boundary_clock_jbod high in the >/etc/ptp4l.conf file. I tried running the command "ptp4l -p /dev/ptp4 -I eno1 >-ens801f1 -m" as well as ru

[Linuxptp-users] PTP Bouncing between Grandmasters

I am trying to set up PTP between a server and switch. The Switch is the Mellanox SN2100 switch. I am trying to send the PTP to some clients on the switch. The timesource on my server has the lowest priority, while the server has a little higher value priority. The switch has priority greater t

[Linuxptp-users] RHEL PTP Boundary Clock

Hello, I am trying to set up my RHEL computer to be a boundary clock to other RHEL computers through a switch (Grandmaster --> Server 1 --> Switch --> Server 2). I have server 1 synced to the grandmaster through one nic, nic 1. I am hoping to have server 2 sync to server 1 through another nic,

Re: [Linuxptp-users] PMC Management ID Parameters

her did the pmc kernel pages (https://linux.die.net/man/8/pmc) Thanks Ben Chang -Original Message----- From: Chang, Benjamin via Linuxptp-users Sent: Sunday, August 15, 2021 10:21 AM To: Richard Cochran Cc: linuxptp-users@lists.sourceforge.net Subject: Re: [Linuxptp-users] PMC Managemen

Re: [Linuxptp-users] PMC Management ID Parameters

C Management ID Parameters > > On Thu, Aug 12, 2021 at 01:10:24PM +, Chang, Benjamin via Linuxptp-users > wrote: > > Hello, > > > > I am trying to understand the Management ID parameters. I can't seem to > > find any definitions for them except for

[Linuxptp-users] PMC Management ID Parameters

Hello, I am trying to understand the Management ID parameters. I can't seem to find any definitions for them except for the couple listed here (stepsRemoved, offsetFromMaster, etc.) https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/system_administrators_guide/ch-conf

Re: [Linuxptp-users] ptp unicast setup

#x27;m not sure UDPv4 is the right route? I tried both UDPv4 and L2 to no success. L2 is the port identity of my ptp grandmaster. Enp0s31f6 is the port that would be receiving the ptp signals. [cid:image002.png@01D78DFC.B4A6E330] From: Chang, Benjamin via Linuxptp-users Sent: Tuesday, August 10,

[Linuxptp-users] ptp unicast setup

Hello, I am trying to setup ptp unicase on my linux device. I am having some trouble setting it up however. I am editing the .conf to include the unicast master table, but I'm sure I'm messing up somewhere (I'm a linux rookie too). If anyone could help clear some things up for me, I'd appreciat

[Linuxptp-users] Ethtools -T outputs?

Hello, I am trying to get an understanding of ptp (and maybe track why I can't get ptp to work) and I did notice that my "PTP Hardware Clock:" value from the ethtools -T call differs from all the examples I've seen. I am curious what the PTP Hardware clock value means? Every example seems to ha

[Linuxptp-users] PTP synchronization help

I'm trying to setup my RHEL computer to sync to a NTP server with PTP abilities. I've been the ptp4l website and the following the RHEL website (https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/system_administrators_guide/ch-configuring_ptp_using_ptp4l). But when I t