I have been testing a small network of about 6 thin clients over the
last few months. The server is a AMD K6 450 Mhz with 512 Mb ram, two 8
Gig IDE hard drives (Raid striped), kernel 2.4.17, Gnome 1.4 and a
100Mbit switched network.
I installed xosview after reading about it on this list a few da
On Sat, 2002-06-22 at 15:24, Stephen Liu wrote:
> Hi Derek,
>
> At 09:22 AM 2002/6/22 +1000, Derek Zoolander wrote:
> >I have tried Wine, but as you said its not mature yet. It does not need
> >windows but works better if you use some of the DLL files from windows,
> >which means you can't sell i
*** If you drop into runlevel 3 on the workstation, what is the output of:
SuperProbe
lspci
(you may have to copy the above programs into the ltsp tree to run them)
On 21 Jun 2002, Jason Fillman wrote:
> Thanks for all the help so far...
>
> With the help of Mr. Cuzzola, I was able to
On Sat, 2002-06-22 at 00:52, Jason A. Pattie wrote:
> If you are using the latest (and I mean latest) version of Win4Lin,
> there is an option (-g I think) that you can send to win when starting
> your Win4Lin session. You can tell it any geometry you want and it will
> size Windows to that se
Thanks for all the help so far...
With the help of Mr. Cuzzola, I was able to mount a partition and copy
my X log. The only thing my virgin eyes can see wrong is the warning:
cannot load apm. Would that cause X not to start? If that's not it,
maybe some of you more experienced types can sort thro
Il giorno Fri, 21 Jun 2002, claus Christian Larsen così ha scritto:
|From: claus Christian Larsen <[EMAIL PROTECTED]>
|To: [EMAIL PROTECTED]
|Date: Fri, 21 Jun 2002 19:44:50 +0200
|Subject: [Ltsp-discuss] How to connect
|
|The grafikcart in my workstation is a trio 64. Vill it give me trouble?
|
? Is my mail HTML?
I use outlook and I know I've turned html sending off to this address but
still am unsure.
THX and sorry in advance if its me
> -Original Message-
> From: Ken Barber [mailto:[EMAIL PROTECTED]]
> Sent: Friday, June 21, 2002 1:32 PM
> To: Charles Marcus; [EMAIL PROTECT
On Friday 21 June 2002 04:05 am, Charles Marcus wrote:
> > I automatically delete these without even reading them.
> > I don't care how desperate the writer is for help.
>
> As would I, normally, but again, since I usually do want to read most of
> the messages, I am forced to scroll past the pag
I've just dusted off and tested my old plustek scanner which I though died
years ago and it is now firing up. I am looking for some advice on how to
integrate it into my LTSP setup.
Should I attach it to the server or the workstation?
The scanner package says workstation, but space wise it would
If you connect your server to the internet via ADSL, then automatically
all your clients have access too (all their processes are running on the
server...)
John
On Fri, 21 Jun 2002 19:44:50 +0200
claus Christian Larsen <[EMAIL PROTECTED]> wrote:
> Can i use my adsl-network to an ltsp-connection
Can i use my adsl-network to an ltsp-connection?
The grafikcart in my workstation is a trio 64. Vill it give me trouble?
My netcart is an 3c509. Will it give me trouble?
I ask because i have installed everything to an ltsp to my server ( suse
8,0) but it is not working yet.
With regards
Clau
Hi List
Does anyone out there know what sound module to use with a Via Eden mini ATX?
FYI
ltsp 3.0
Mandrake 8.0
Any tweaks any one has for these systems would be appreciated. Even though it
seems to run nicely.
Alan
---
Sponsored by:
Thin
On Tue, 2002-06-18 at 16:08, Jeff Roberts wrote:
> Hey guys,
>
> Any of you know how to unconfigure sound in redhat 7.2 and gnome?
>
> I built another server and copied my users and settings to it. It works
> great except for two annoying messages saying "I was not able to open
> your sound d
Change the server address, or change the workstation address. Can't fix
anything until you get that fixed.
Joey
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Guilherme
Adolfo Wiggers
Sent: Friday, June 21, 2002 9:57 AM
To: [EMAIL PROTECTED]
Subject:
Title: abdyesilkart.com
Sayýn ltsp-discuss ,
Amerika 'nýn her
sene yapmakta olduðu, sahiplerine devamlý oturma ve çalýþma izni saðlayan Green
Card çekiliþi için kayýtlarýmýz baþlamýþtýr.
Green Card sahipleri;
1.Amerika Birleþik
Devletleri'nde süresiz olarak (hayat boyu) oturma ve çalý
Thanks for the reply. Let me know if it works.
I also get the message on a box at home with ltsp on it.
-Jeff
On Fri, 2002-06-21 at 10:31, Jason Fillman wrote:
>
> Ugh how I hate that message!
>
> I've got the "boxed" version of Gnome from Ximian, so they offer tech
> support etc.. Just today
Ugh how I hate that message!
I've got the "boxed" version of Gnome from Ximian, so they offer tech
support etc.. Just today they finally released a new gnome-core package
that's supposed to take care of that. I'll let you know how it works
after it gets finished downloading on this horridly slow
Sorry ... i have made a mistake here ...
.. Me: 192.150.62.60Server: 192.150.62.90Gateway: 192.150.62.254
:~)
---
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
___
Guilherme,
I think Jim missed this point.
> .. Me: 192.150.62.90Server: 192.150.62.90Gateway: 192.150.62.254
Before anything else, change IP in your dhcpd.conf file. Me cannot have the same
192.150.62.90
as the Server.
--
Best regards,
Bill mailto:[EMA
Ok ... let me say ...
All my WS have a valid IP, that are gave by dhcp from my server, but my DNS
is something like 192.150.62.253.
I have configured all WS on DHCPd, lts.conf, and have tested all possible
problems ... but the sistem not work !!! :~/
My ftp is ok, my ipchains and tables are ok, nf
If you are using the latest (and I mean latest) version of Win4Lin,
there is an option (-g I think) that you can send to win when starting
your Win4Lin session. You can tell it any geometry you want and it will
size Windows to that setting. So, when the user logs in and you are
going to only
Charles,
I'm the list manager. But, I don't have control over
html being blocked. The list is hosted on SourceForge,
using Mailman, and there is no ability to block the html
mail.
Sure, you complaining about it may stop 1 person
from sending html email. But, there are about 100 new
people a we
Good news this morning. I sorted out my startup script for configuring galeon,
and we swapped the celeron machine with a P4 1.6Ghz machine.
Whilst I was editing sundry icewm scripts, and without my knowledge, a class
full of kids started using the terminals for web browsing. I was sat at the
P4
> From: Derek Zoolander <[EMAIL PROTECTED]>
> Date: 21 Jun 2002 19:18:36 +1000
>
> On Fri, 2002-06-21 at 14:41, Brent Hasty wrote:
>> Just interested in hearing any success storys out
>> there of those who have sucessfully set up win4lin
>> on thier terminal servers giving the workstations
>> lega
> From: Ken Barber <[EMAIL PROTECTED]>
> Date: Thu, 20 Jun 2002 21:39:23 -0700
>
>> If you are using any modern e-mail client, just tell it to
>> do text only and most will "strip" the html part off. (at
>> least my Kmail does)
> I am also using KMail and I do that (as suggested above),
> but it
> From: "Guilherme Adolfo Wiggers" <[EMAIL PROTECTED]>
> Date: Thu, 20 Jun 2002 23:12:51 -0300
>
> Hi all!!
> I'm new here. My WS can't boot ... all that they do is:
> .. Me: 192.150.62.90Server: 192.150.62.90
> Gateway: 192.150.62.254
> loading 192.150.62.90:/tftpboot/lts/vmlinuz.ltsp3.0.0.1
> Date: Thu, 20 Jun 2002 17:48:52 -0400 (EDT)
> From: <[EMAIL PROTECTED]>
>
>> Can we *please* stop the HTML Email hell
>>
>> This is ridiculous.
>>
>>
>> Charles
> Charles,
>
> HTML in email has be come a fact of life.
>
> Just do like I do. Ignore it.
>
> Complaining about it isn't gonna g
Yip, I've had it running.
Client is P266, server is PIII800, 10BaseT - win4lin now runs win apps
faster than they used to run on win98 native!
I want to use this design in a K12 environment, the only downside is win
98 and apps installations are required for each login. You won't want
to sit thro
On Fri, 2002-06-21 at 14:41, Brent Hasty wrote:
> Just interested in hearing any success storys out there of those who have
> sucessfully set up win4lin on thier terminal servers giving the workstations
> legacy application support?
>
I have been using it at various times over the last 9 Month
On Fri, 21 Jun 2002 00:36:52 -0400, "Brent Hasty" <[EMAIL PROTECTED]> wrote:
> Using xdm and or kdm how does one go about configuring custom login
> backgrounds, to replace the hounds tooth that seems to be default for the
> login screen on the ltsp clients (workstations)?
Well, *GDM* has
Just interested in hearing any success storys out there of those who have
sucessfully set up win4lin on thier terminal servers giving the workstations
legacy application support?
Brent Hasty
http://www.Hasty-Solutions.com
---
Sponsored by:
T
Using xdm and or kdm how does one go about configuring custom login
backgrounds, to replace the hounds tooth that seems to be default for the
login screen on the ltsp clients (workstations)?
Brent Hasty
http://www.Hasty-Solutions.com
---
Spo
32 matches
Mail list logo
