Fathi,
Take a look at http://www.ltsp.org/instructions-3.0.html
Down near the bottom is an example of the settings
need for a NE2000 ISA card.
I think for the 3c509 card, you don't need the IO=0x300 statement,
the driver will probe and find the address.
So, just have the option-128 with the sp
Hello,
I have some old x486 with no pci slots (compaq presario cds 522 among
others).
I finaly found some 3c509b nics that could boot from a rom-o-matic.org
generated .lzdsk boot file.
Now, as this are isa nics, they need their driver to specified in the
dhcp response.
The driver loaded by etherb
gt;Subject: Re: [Ltsp-discuss] Syntax for passing option-129 to
a terminal
>To: [EMAIL PROTECTED]
>
>>> The driver loaded by etherboot flopyy is 3c5x9 at 0x0300.
>>> I tried different ways to feed this information to the
client but I
>>> still get a Kernel panic
>> The driver loaded by etherboot flopyy is 3c5x9 at 0x0300.
>> I tried different ways to feed this information to the client but I
>> still get a Kernel panic and an error message about the isa nic driver.
>>
>> Could someone please tell me the correct syntax for option-129 (with
>> some examples
Thank You All, this helped me a lot.
It works now.
Fathi B.N.
_
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try
Fathi Ben Nasr <[EMAIL PROTECTED]>:
> Hello,
>
> I have some old x486 with no pci slots (compaq presario cds 522 among
> others).
> I finaly found some 3c509b nics that could boot from a rom-o-matic.org
> generated .lzdsk boot file.
> Now, as this are isa nics, they need their driver to specifi
Fathi,
Take a look at http://www.LTSP.org/instructions-3.0.html
Down near the bottom are some examples of dhcpd.conf
settings.
Jim McQuillan
[EMAIL PROTECTED]
Fathi Ben Nasr wrote:
> Hello,
>
> I have some old x486 with no pci slots (compaq presario cds 522 among
> others).
> I finaly found
- Original Message -
From: Fathi Ben Nasr <[EMAIL PROTECTED]>
To: List, LTSP Mailing <[EMAIL PROTECTED]>
Sent: Saturday, January 19, 2002 12:42 PM
Subject: [Ltsp-discuss] Syntax for passing option-129 to a terminal
> Hello,
>
> I have some old x486 with no pci s
On Sat, 19 Jan 2002, Fathi Ben Nasr wrote:
> The driver loaded by etherboot flopyy is 3c5x9 at 0x0300.
> I tried different ways to feed this information to the client but I
> still get a Kernel panic and an error message about the isa nic driver.
>
> Could someone please tell me the correct synta
Hello,
I have some old x486 with no pci slots (compaq presario cds 522 among
others).
I finaly found some 3c509b nics that could boot from a rom-o-matic.org
generated .lzdsk boot file.
Now, as this are isa nics, they need their driver to specified in the
dhcp response.
The driver loaded by etherb
10 matches
Mail list logo