the lyx2lyx script failed to
convert it.
Is there a straightforward workaround?
Thank you
Tim
On 27 Nov 2023, at 13:00, Tim Garrett wrote:
> Hi Scott,
>
> I found a clue. The problem of slow cursor speed is not present in 2.3.0, but
> it is present in all versions subsequent to t
Hi Scott,
I found a clue. The problem of slow cursor speed is not present in 2.3.0, but
it is present in all versions subsequent to that.
Tim
On 18 Nov 2023, at 21:21, Scott Kostyshak wrote:
> On Sat, Nov 18, 2023 at 08:30:16PM -0700, Tim Garrett wrote:
>> Hi Scott,
>>
>
.
Thanks for you time and help
Tim
On 18 Nov 2023, at 21:21, Scott Kostyshak wrote:
> On Sat, Nov 18, 2023 at 08:30:16PM -0700, Tim Garrett wrote:
>> Hi Scott,
>>
>> I backtracked on LyX version to 2.3.0 from 2018. That seems to have fixed
>> the slow cursor and t
Hi Scott,
I backtracked on LyX version to 2.3.0 from 2018. That seems to have
fixed the slow cursor and typing seed problems fingers crossed. It does
however introduce a new problem which is the below. If you know a simple
fix I should be good I hope.
Thank you
Tim
![](cid:6CE0B8EE-03C7
Scott,
Is it worth trying as an emergency solution reverting to an older version of
LyX? If so, any in particular?
Thanks
Tim
On 14 Nov 2023, at 8:38, Tim Garrett wrote:
> Hi Scott,
>
> Here’s a video showing how it slows down
> https://www.dropbox.com/scl/fi/jtfm92l11orb9254
Scott,
Is it worth trying as an emergency solution reverting to an older version of
LyX? If so, any in particular?
Thanks
Tim
On 14 Nov 2023, at 8:47, Scott Kostyshak wrote:
> On Tue, Nov 14, 2023 at 08:38:54AM -0700, Tim Garrett wrote:
>> Hi Scott,
>>
>> Here’s a video
Hi Stephan, I think my response was held up because of email size. Deleting the
image.
In any case, what you suggested, unselecting running spellcheck, did not help
matters unfortunately.
Thank you for the advice. Would really love to solve this!
Tim
--
lyx-users mailing list
lyx-users
Hi Scott,
Saving and reopening doesn’t change anything in behavior.
Version 2.4.0~beta5 (August 31, 2023)
Qt Version (run-time): 5.15.10 on platform cocoa
Qt Version (compile-time): 5.15.10
OS Version (run-time): macOS 12.4
Python detected: python3 -tt
Thanks
Tim
On 14 Nov 2023, at 8:47
Hi Scott,
Here’s a video showing how it slows down
https://www.dropbox.com/scl/fi/jtfm92l11orb9254xsz5z/Screen-Recording-2023-11-14-at-7.50.08-AM.mov?rlkey=fzk7aaycqabgul55ipun4ste5&dl=0
I don’t experience this issue on any other application, including Word or
Overleaf.
Thanks again
Tim
Scott, the same is also true of typing speed. If I hold down a letter the rate
at which the letter is typed slows down progressively the more letters there
are. I type faster, so…
Tim
On 7 Nov 2023, at 18:49, Scott Kostyshak wrote:
> On Tue, Nov 07, 2023 at 05:24:13PM -0700, Tim Garrett wr
Scott,
Well an unfortunate update. Scrolling works fine. But select (shift arrow)
scrolling has the same issue of being slower with longer paragraphs.
It seems some bug was fixed perhaps suggesting there’s a related bug too that
might need addressing?
Thanks
Tim
On 7 Nov 2023, at 18:49
Thank you Scott!
Found LyX-2.4.0~beta5+qt5-x86_64-arm64-cocoa.dmg in France.
Did the trick. No cursor problems at all.
Now *very* happy.
Tim
On 7 Nov 2023, at 8:19, Scott Kostyshak wrote:
On Mon, Nov 06, 2023 at 10:07:56AM -0700, Tim Garrett wrote:
I’m near the point that I have to abandon
Hi Scott,
Thanks for the tip. Not seeing the pre-release at https://www.lyx.org/Download
Anywhere else I should look?
Thanks for the time
Tim
On 7 Nov 2023, at 8:19, Scott Kostyshak wrote:
> On Mon, Nov 06, 2023 at 10:07:56AM -0700, Tim Garrett wrote:
>> I’m near the point that
I’m near the point that I have to abandon LyX after using it
religiously as an academic since 2000 (when it was kLyX-0.12). That
makes me *very* sad.
The problem is that as a paragraph gets longer, the cursor gets slower.
The paragraph doesn’t have to be very long (e.g. a few sentences) for
t
, help much appreciated as this is kind of crippling for any writing I do
for work.
On 9 Aug 2023, at 10:09, Stephan Witt wrote:
> Am 09.08.2023 um 18:02 schrieb Richard Kimberly Heck :
>>
>> On 8/9/23 11:23, Tim Garrett wrote:
>>> Hi Scott,
>>>
>>> I’m won
um 17:09 schrieb Tim Garrett :
>>
>> Stephan,
>>
>> Unfortunately I spoke too soon. There was improvement, then it slowed to a
>> crawl again. Worse than before if anything. The speed of the cursor is still
>> inversely related to the length of the paragraph.
&
) tgarrett@tims-mbp ~ % which python3
/usr/local/bin/python3
For the PATH prefix in preferences:
/Library/TeX/texbin:/usr/texbin:/sw/bin:/sw/sbin:/opt/local/teTeX/bin:/opt/local/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/usr/sbin:/sbin:/usr/local/bin
Tim
On 10 Aug 2023, at 5:27, Stephan Witt wrote
shows up in /Applications
Tim
On 10 Aug 2023, at 5:27, Stephan Witt wrote:
> Am 10.08.2023 um 07:11 schrieb Tim Garrett :
>>
>> Thanks. Not sure I did it right, but this is what I did. Added that string
>> to the PATH as follows
>>
>> /Library/TeX/texbin:/usr/t
, reconfigured. Still get the same error message:
The layout file:
article could not be found. A default textclass with default layouts will be
used. LyX will not be able to produce
correct output.
On 9 Aug 2023, at 23:02, Stephan Witt wrote:
> Am 10.08.2023 um 01:56 schrieb Tim Garrett :
>>
in:/Library/TeX/texbin
On 9 Aug 2023, at 17:09, Stephan Witt wrote:
> Am 10.08.2023 um 00:15 schrieb Tim Garrett :
>>
>> Sorry, it’s what I sent earlier:
>
> Sorry, but no, it isn’t.
>
> That’s the output of the command w/o -V … but anyway. Where is your python3
> ins
Sorry, it’s what I sent earlier:
Python 3.8.5 (default, Sep 4 2020, 02:22:02)
[Clang 10.0.0 ] :: Anaconda, Inc. on darwin
On 9 Aug 2023, at 15:49, Stephan Witt wrote:
> Am 09.08.2023 um 23:47 schrieb Stephan Witt :
>>
>> Am 09.08.2023 um 21:41 schrieb Tim Garrett :
>&
ote:
> Am 09.08.2023 um 20:20 schrieb Tim Garrett :
>>
>> Thanks for the response!
>> I have this so perhaps something else?:
>>
>
> Yes, maybe something else.
>
> Please, enable file and info messages in messages pane. Rerun reconfigure and
> present th
Thanks for the response!
I have this so perhaps something else?:
![](cid:C0ADE3DA-7989-4411-9941-421BF979CACD@utah.edu "PastedImage.png")
On 9 Aug 2023, at 12:01, Stephan Witt wrote:
Am 09.08.2023 um 18:50 schrieb Tim Garrett :
This may have worked!
But in a reconfigure reque
This may have worked!
But in a reconfigure request problem.
![](cid:FAFD155E-9B33-4703-BAD9-7CF8745AFD28@utah.edu "PastedImage.png")
Sorry, should know what to do next but it’s been a while. Multiple
reconfigures doesn’t fix the problem.
Thanks
Tim
On 9 Aug 2023, at 10:09, St
Hi Scott,
I’m wondering if there’s something like a factory reset I can do on the
settings that is worth trying. Perhaps over the years I’ve adjusted the look
and feel to something that is causing problems.
Tim
On 9 Aug 2023, at 4:31, Scott Kostyshak wrote:
> On Tue, Aug 08, 2023 at 03
I use Overleaf
though I still prefer LyX.
In 2001, KLyX changed my life, but because of the top search result! E
Tim
On 8 Aug 2023, at 14:42, Scott Kostyshak wrote:
> On Tue, Aug 08, 2023 at 08:23:15AM -0600, Tim Garrett wrote:
>>
>> Hi Scott,
>>
>> Thank
other file, double paste, and notice the difference in cursor speed.
Thanks again
Tim
On 8 Aug 2023, at 1:56, Scott Kostyshak wrote:
> On Mon, Aug 07, 2023 at 04:27:44PM -0600, Tim Garrett wrote:
>> I’ve been having a problem with cursor and typing speed. I find the speed of
>>
in 2001 so pretty
much my entire career is now on a super-laggy platform.
Thank you
Tim
LyX 2.3.6.2 (2021-01-07)
Configuration
Host type: x86_64-apple-darwin18.7.0
Special build flags: build=release std-regex warnings use-hunspell
use-aspell
Bundled libraries
rks too on older documents as well.
Tim
On 21 Aug 2022, at 4:31, Stephan Witt wrote:
Am 21.08.2022 um 10:33 schrieb Stephan Witt :
Hi Tim,
you have to change your command - lyx2lyx is a folder in Resources:
Sorry, this one sends the standard output to trash… this is useful
in case of lyx2lyx
here. Been a LyX user since 2001 when it was KLyX
and this is the first time I’ve seen this.
Tim
On 20 Aug 2022, at 3:57, Stephan Witt wrote:
Am 18.08.2022 um 18:07 schrieb Paul A. Rubin :
On 8/18/22 11:15, Tim J Garrett wrote:
Running MacOS Monterrey and getting this error message trying to
appreciated. I have tried installing
old versions of lyx but without success. Below is the lyx preamble
Thanks
Tim
#LyX 2.1 created this file. For more info see http://www.lyx.org/
\lyxformat 474
\begin_document
\begin_header
\textclass article
\begin_preamble
\usepackage[left,modulo]{lineno
I can't help you directly -- but consider instead setting up Nuance
Dragon Dictate to put LyX into LaTeX insertion mode, then translate
LaTeX directly.
This will give you everything that LyX can give you, with the benefit
-- to other users if not immediately to you -- of being useful for an
All of the PDF articles on this site are authored in LyX:
http://wescottdesign.com/articles.html.
Note that the formatting is intentionally made less formal than
something you'd see in a journal.
Quoting Carlos Knauer :
Hi
Where do I found articles written using LyX ? Is there a site ?
Can you identify why it takes so long?
Are you splitting it up by chapter? I would certainly expect that a
per-chapter rendering would take less time (at least per chapter),
unless the document contains a lot of cross-references.
Usually the reason I need to do frequent document compiles i
If you're talking about inserting graphics, you can insert a jpg file
directly. I'm not sure that Lyx would even do a conversion for you.
Quoting Wolfgang Engelmann :
What do I have to insert in the converter box for JPG to EPS?
Wolfgang
s and/or delete all
temporary files before compiling?
Thanks for your help,
Tim
file.
"Myreading.lyx is from an older version of LyX and the lyx2lyx script failed
to convert it."
Kind regards,
Kim
On Oct 2, 2017 10:42 PM, "Scott Kostyshak" wrote:
On Mon, Oct 02, 2017 at 11:29:50PM +, Tim Q wrote:
> hi,
>
>
> "" Myreading.lyx
hi,
"" Myreading.lyx is from an older version of LyX and the lyx2lyx script
failed to convert it. ""
This is the message i got when i tried to open a Lyx file from an older
version 2.0.8.1 that i have been using and I have Ubuntu 14.0. This file is
extremely important to me as i have been workin
hi,
"" Myreading.lyx is from an older version of LyX and the lyx2lyx script
failed to convert it. ""
This is the message i got when i tried to open a Lyx file from an older
version 2.0.8.1 that i have been using. This file is extremely important to
me as i have been working on it for 2 years. I
Hi Scott,
Oh well, thanks for bumping this up anyway. Sorry about replying to the
wrong address. I'm a bit new to the list.
Cheers,
Tim
On 30/05/17 04:05, Scott Kostyshak wrote:
On Mon, May 29, 2017 at 09:06:51AM +1200, Tim Divett wrote:
Hi Scott,
No. I haven't. At this stag
done something wrong.
Is there a Lyx template that uses the latest AGUjournal class? Or is
there some way to use it?
I'm using Lyx 2.1.4 on Ubuntu 16.04.
Thanks in advance.
Tim
PS: I'm a huge fan of Lyx, I used it to write my PhD thesis and am very
grateful to the community that
And note that, sometimes, when you're trimming a file down for that
"minimal example" you end up doing such a good job narrowing things down
to the real problem that you find the solution itself.
So even if you disregard the benefit to the community, it's not just
wasted work.
On 2016-11-04
Have you tried making sure that the RCS archive is getting copied
across? If you're just transporting the lyx file then you will, of
course, not be getting the history in the archive.
Can you find a cloud-based version control service (Github? -- I'm so
naive)? Your version control wouldn't be
On 2016-02-14 08:59, Michael Berger wrote:
Hi all, can somebody help, please!
I am working on a thesis (linguistic) based on Miede's
classicthesis.v4.1.
The Example per screenhot causes the compilation to PDF to run
endlessly.
I cannot interrupt the process and am forced to cut the power off.
I have the same problem.
I have just downloaded version 2.14 on a Mac.
The eyes on the toolbar are greyed out.
I followed the procedure to solve the issue.
Though, pdf is not an option when it comes to output.
I only have Rich Text Format and LyXHTML.
Any ideas on what I should do?
Many than
"Export" gives you five different options to generate a LaTeX file.
Surely one of them ("plain" would be my first choice) would work.
On 2014-08-27 08:02, Eisa Alanazi wrote:
Did you try "export" on the file menu? I remember LyX had this feature.
On Aug 27, 2014, at 5:57 PM, William Hanson w
Uwe Stöhr web.de> writes:
>
> Am 06.06.2012 11:04, schrieb Rick Blok - LR:
>
> > I've just checked the computer were I don't have admin rights, and I
don't see perl.exe in the bin folder,
> and I also don't have a lib-folder.
>
> Not good. However in the meantime it is possible to install LyX
Thank you,
kind reagards
Tim Breitenbach
Thank you. That fixes that (I looked for something like
Insert->Special Characters and did not find it -- I'm not alert today,
or something).
On 2013-06-06 16:57, Uwe Stöhr wrote:
Am 06.06.2013 22:45, schrieb Tim Wescott:
Bibliography environment (at least so I think). Here'
Bibliography environment (at least so I think). Here's a file that
shows the problem.
On Thu, 2013-06-06 at 14:09 -0400, Richard Heck wrote:
> On 06/06/2013 02:05 PM, Tim Wescott wrote:
> > I'm trying to reference a book by a Swedish author. Putting
> > {\AA}strom95 as
I tried putting a really really long URL into Lyx, expecting that it
would get line breaks forced as necessary to fit.
That didn't happen -- instead, it just gets truncated.
Is there a way to force line breaks in a URL, or even (oh be still my
heart) to tell Lyx to make it happen?
TIA
--
ls me).
--
Tim Wescott
www.wescottdesign.com
Control & Communications systems, circuit & software design.
On 2013-04-15 16:54, Rich Shepard wrote:
On Mon, 15 Apr 2013, t...@wescottdesign.com wrote:
Could the table be of fixed width? Could it be bigger than the size
of the minipage, but not getting clipped?
Tim,
Quite possible.
I have not found where I can reduce the size. I just tried
Could the table be of fixed width? Could it be bigger than the size of
the minipage, but not getting clipped?
I've had no trouble in the past with Beamer and miniboxes, but I have
noticed that Beamer thinks a slide is 100mm across, or something oddball
like that.
On 2013-04-15 16:33, Rich S
rhaps. Bizarre, definitely but anyway, it is no longer a
problem...
Cheers,
Tim
On Fri, Dec 7, 2012, at 09:21 AM, Uwe Stöhr wrote:
> Am 06.12.2012 11:26, schrieb Tim Opie:
>
> > Any thoughts as to what is going on?
>
> You can only have one "Begin Appendix here" per document. So if you have
> child documents, add the
> appendix to the
Hi, I am working on my PhD thesis using LyX 2.0.5 on OS X 10.8.2, and
the weirdest thing is happening with my appendix.
I have set up the appendix region (using start appendix here) and
included the appendix files in my parent document. The TOC outline and
the Navigator see them perfectly, and ti
[] % Do nothing for \subsection*
{
\begin{frame}
\frametitle{Outline}
\tableofcontents[currentsection,currentsubsection,subsectionstyle=show/shaded/hide]
\end{frame}
}
On Mon, 2012-10-29 at 13:42 -0700, Tim Wescott wrote:
> I couldn't even begin to figure out how to Google for this, so I'm
like
Section 2: Blastocyst
Section 2.1: Genetics
Section 2.2: The drawbacks of early tatooing
Then at the section breaks I want to see:
> Gliptodont
> Blastocyst
And at subsections 1.1 and 1.2, I want to see
> Gliptodont
> Not Armadillos
> But much like
> Blastocyst
--
Tim Wesc
Evince isn't available for mac. But, your suggestion led me to try open -a
/Applications/Preview.app (something I should have thought of earlier), and that works
like a charm.
Still...strange it no longer works for acrobat.
Tim
On 9/30/12 12:51 PM, Liviu Andronic wrote:
On Sun, Sep 30,
ason I'd never considered lyx as command line tool.
This will do exactly what I need :-)
Thanks,
Tim
--
http://j.mp/timhead
chapter3.pdf etc.
This is a bit tedious so I was wondering if there was a way to define
a shortcut to do this or use the lyx-server?
I use LyX 2.0.4 on MacOS 10.6.8.
Thank you,
Tim
--
http://j.mp/timhead
2012/7/26 Richard Heck
> On 07/26/2012 01:05 PM, Tim Meke wrote:
>
>
> 2012/7/26 Richard Heck
>
>> On 07/25/2012 03:08 PM, Tim Meke wrote:
>>
>>> Hello,
>>>
>>> I would like to use crossreferences like "That statistics leads to se
the link to
the pdf handler that is broken.
Thanks for advice.
Tim
Hello,
I would like to use crossreferences like "That statistics leads to see the
same conclusion (figure 3)."
The word "figure" should be included automatically. I read the manual and
tried the formatted cross-reference.
The example from the German manual (EmbeddedObjects, 3.4.1) is, which is m
e a way to make this happen?
--
Tim Wescott
www.wescottdesign.com
Control & Communications systems, circuit & software design.
On Tue, 2012-05-08 at 22:25 +, Paul A.Rubin wrote:
> Tim Wescott wescottdesign.com> writes:
>
> >
> > I want to generate a page with Beamer that looks like the enclosed
> pdf.
> > Any suggestions on how to achieve the "arrows pointing to parts of
>
Hi folks,
I just updated from 2.0.1 to 2.0.2 on Mac OS X Lion and I am having trouble
with PDF generation following the update. Attempting to view PDF for the
current buffer (e.g. View->View [PDF (pdflatex)]) results in an error dialog
that says:
File does not exist:
/var/folders/d5/x83jmq6j
Thanks Francesco.
It's not the worlds prettiest work-around, but at least its a work
around.
On Wed, 2011-10-19 at 11:26 +0200, Francesco Menoncin wrote:
> Dear Tim,
>
> I had the very same problem and I already notified it (it is now in
> the "to do" list for the nex
See the attached document in Lyx.
Then see it in pdf.
The two places on the right where rows are combined lose the border in
the transition.
What's wrong?
How can I fix this?
--
Tim Wescott
www.wescottdesign.com
Control & Communications systems, circuit & software desig
ld help me or others
> that are doing the same kind of contemplations, please do not hesitate and
> do share!
>
> Thank you very much for time. I look forward to read your replies!
>
> Johnston81
>
> --
> View this message in context:
> http://lyx.47576
ght\footnotesize #1}}
>
> and it works like a charm :). I guess you could use another size instead of
> footnotesize, but it seem to about right for me :)
>
> HTH
> Ingar Pareliussen
--
Tim Wescott
www.wescottdesign.com
Control & Communications systems, circuit & software design.
How do I change the font size in marginal notes? I've looked around --
I don't see much guidance in Kopka & Daly, and the only thing I found on
a web search was this, which isn't helping:
http://www.mail-archive.com/lyx-users@lists.lyx.org/msg19731.html
TIA
e an
equation) to act like one big character, but not in PowerPoint
(LibreOffice Present mimics this "feature", by the way).
By the way: you could have used Microsoft Equation Editor, which comes
with Word. It sucks, but you can get the point across.
--
Tim Wescott
www.wescottdesign.com
Control & Communications systems, circuit & software design.
"Enchant", also enable Spellchecker
> continuously.
>
> regards
> waluyo
Waluyo:
That's the ticket! It's working great now.
Stephan:
It turns out that Enchant and aspell were already installed, I just
needed to flick the switch in LyX.
Thanks.
--
Tim Wes
On Wed, 2011-08-10 at 23:10 +0200, Stephan Witt wrote:
> Am 10.08.2011 um 22:41 schrieb Tim Wescott:
>
> > I got Ubuntu 11.04 going a while back, with Lyx 2.0. Very nice. But
> > the spell checker isn't working -- when I go to the Tools menu,
> > "spellcheck
r not doing, or whatever?
--
Tim Wescott
www.wescottdesign.com
Control & Communications systems, circuit & software design.
Does anyone know how to change the line spacing in the TOC so that you have
single space within a chapter and double in between chapters?
Thanks,
Tim
hey'll still appear automagically in LyX when I want a template for
a document.
Suggestions?
--
Tim Wescott
www.wescottdesign.com
Control & Communications systems, circuit & software design.
unding box
to the left margin that may have fixed it (or it may have just made it
shift slightly to the _left_, up against the right margin).
Dunno. Dunno if it matters, or if you care -- but that's what seems to
happen to me when I make 'em too big.
--
---
Tim Wescott
www.wescottdesign.com
Control & Communications systems, circuit & software design.
On 06/24/2011 12:21 PM, Liviu Andronic wrote:
On Fri, Jun 24, 2011 at 9:12 PM, Tim Wescott wrote:
I'm using Lyx 1.6.5 on Ubuntu 10.04, it's been just fine. Until now. This
is what happens when I open a document, then try to create a figure frame.
This is an operation that I
On 01/21/2011 10:52 AM, lyx-de...@oak-tree.us wrote:
Hi Tim,
I haven't looked into, but you might see what tools are available for
creating ePub files. LyX can export to XHTML already, and ePub is merely a
subset of XHTML.
It seems that getting an XHTML file is the easy step. You could e
ment still happens.
Also, how do I install the caption package for LyX 1.6.8 ?
Thanks you for your suggestions,
Best regards,
Tim
rsion gets built that file name points to decent
margins for A-size paper.
Is this the best I can do, or is there some other, better way?
--
Tim Wescott
Wescott Design Services
Voice: 503-631-7815
Cell: 503-349-8432
http://www.wescottdesign.com
figure _in_ the example is
probably the better way to go.
On 12/29/2010 01:30 AM, Liviu Andronic wrote:
On Wed, Dec 29, 2010 at 12:59 AM, Tim Wescott wrote:
I'm putting examples into my text, using the Theorem environment to make a
nicely set off section of text, with labels and all. It w
f the
environment are getting placed inside.
Is there a way to say "floats defined in here only go in here, floats
defined out of here only go out of here"?
TIA.
--
Tim Wescott
Wescott Design Services
Voice: 503-631-7815
Cell: 503-349-8432
http://www.wescottdesign.com
On 12/27/2010 05:09 PM, Tim Wescott wrote:
I'm rewriting this article:
http://www.wescottdesign.com/articles/Friction/friction.html. I want
to put in examples in more or less the same way: i.e., leave all else
as-is, but increase the margins so that the text is narrower.
I assume that
them back later.
But is there a more elegant way? Is there a quick way to define an
"example" text class? Is there a way to make LyX recognize it?
--
Tim Wescott
Wescott Design Services
Voice: 503-631-7815
Cell: 503-349-8432
http://www.wescottdesign.com
On 12/27/2010 01:48 PM, Paul Rubin wrote:
Tim Wescott wescottdesign.com> writes:
I'm trying to specify some vertical fill in this file:
http://www.wescottdesign.com/temp/friction.lyx
But it doesn't show up the way I expect here:
http://www.wescottdesign.com/temp/friction.pdf
own from the top.
While not so important, I also _expected_ the "references" section to be
at the bottom of its page, even when it's the only thing there.
So how do I communicate this to Lyx/LaTeX?
TIA.
--
Tim Wescott
Wescott Design Services
Voice: 503-631-7815
Cell: 503-349-8432
http://www.wescottdesign.com
On 12/22/2010 11:42 AM, Julien Rioux wrote:
On 22/12/2010 1:56 PM, Tim Wescott wrote:
I have a whole family of documents that I'm working on, all of which I
want to have the same look and feel. I tried making a separate last page
document, with blurbs for my company and a copyright notice
lushbottom in ERT a bit before the offending
equation and \raggedbottom in ERT a bit after.
/Paul
That does odd things in other places, and didn't solve the problem --
Stephen's suggestion of changing \footskip was right on.
--
Tim Wescott
Wescott Design Services
Voice: 503-631-7815
On 12/22/2010 02:38 AM, stephen's mailinglist account wrote:
On 22 December 2010 02:15, Tim Wescott wrote:
If you would direct your attention to the bottom of page 6 of this document,
you will see that the bottom of the equation is mashed down into the
separation line of the footer:
On 12/22/2010 10:56 AM, Tim Wescott wrote:
I have a whole family of documents that I'm working on, all of which I
want to have the same look and feel. I tried making a separate last
page document, with blurbs for my company and a copyright notice, and
putting it in with a LaTeX co
ow what's up? I can 'fix' this problem with links, but it'll
be a pain.
--
Tim Wescott
Wescott Design Services
Voice: 503-631-7815
Cell: 503-349-8432
http://www.wescottdesign.com
, but it depends on some graphics files that I'm not
including:
http://www.wescottdesign.com/actfes/exercises/chapter_2_ex.lyx
--
Tim Wescott
Wescott Design Services
Voice: 503-631-7815
Cell: 503-349-8432
http://www.wescottdesign.com
x27;ll need
to superscript it by hand, but if you do it looks just fine, and you can
have multiple references to the same note.
On 11/23/2010 03:29 PM, curtis osterhoudt wrote:
Hi, Tim,
I recently had occasion to do this, in a table. I ended up using
the ctable package. I think there are mu
Is there a way to reference a footnote multiple times? I.e., when you
have multiple entries in a table, all needing the same note?
Thanks.
--
Tim Wescott
Wescott Design Services
Voice: 503-631-7815
Cell: 503-349-8432
http://www.wescottdesign.com
On 11/22/2010 11:56 AM, Rob Oakes wrote:
Hi Tim,
Footnotes in floats are weird. Floats can migrate from page to page in an
effort to balance the page layout. This causes their footnotes to get left
behind (or cut out completely).
Try placing the table inside a minipage (box) within the
On 11/15/2010 08:46 AM, Tim Wescott wrote:
I want to make myself an article template that's otherwise normal, but
with a custom title page. Basically, I want something that goes
(Nifty graphics with my company logo)
title
author
abstract
(More nifty graphics)
This is for w
1 - 100 of 266 matches
Mail list logo