I would like to know if it is possible to create a document wich has 2
columns of different width, for exemple a wide column at the right side
of the page, approx 13 cm wide, and a smaller one of 4 cm at the left
side. The main text would be in the main column, and the left column
would be used
>>>>> "Raymond" == Raymond Ouellette <[EMAIL PROTECTED]> writes:
Raymond> I would like to know if it is possible to create a document
Raymond> wich has 2 columns of different width, for exemple a wide
Raymond> column at the right side of the page, approx 1
[fichier joint : testmarge.lyx 13020 octets]
I enclosed with this email a test lyx file with the reverse margin note.
It works with times fonts, but if I try to change the entire document to
helvetica fonts (Format-->Document-->Font properties) nothing happens.
I then select all the text and I d
Raymond Ouellette wrote:
> I enclosed with this email a test lyx file with the reverse margin note.
> It works with times fonts, but if I try to change the entire document to
> helvetica fonts (Format-->Document-->Font properties) nothing happens.
>
> I then select all the text and I do Format--
On Thu, Feb 22, 2001 at 02:24:37PM -0500, Raymond Ouellette wrote:
One more thing:
If you don't need "normal" margin notes, you can put the following lines in
the preamble:
\let\oldmarginpar=\marginpar
\renewcommand{\marginpar}[1]{\reversemarginpar\oldmarginpar{#1}}
and then you will not need to
On Thu, Feb 22, 2001 at 02:24:37PM -0500, Raymond Ouellette wrote:
> [fichier joint : testmarge.lyx 13020 octets]
>
> I enclosed with this email a test lyx file with the reverse margin note.
> It works with times fonts, but if I try to change the entire document to
> helvetica fonts (Format-->Doc
Hello,
I require 1.3cm spacing between two columns for my
article. Can't find it anyway under layout. Secondly, my
articles Title, Author, Address need to crossover two columns at the first page.
I certainly appreciate if someone can help. Thanks.
MHLee
Hi
I produced a two-column document recently, where the hyphenation looked
pretty grim - single letters cut off words etc. Is there a way to
optimise this.
Henk
--
Henk Coetzee
Geophysics Unit
Council for Geoscience
Private Bag X112, Pretoria, 0
Hello,
I need to print two columns,
where each paragraph of the right column must be locked to
a specific line in the left column -- a bit like margin notes,
though in this case there is almost as much text in the right
column as in the left.
I did try using margin notes (changing format in the
> Hisyam Lee wrote:
>
> Hello,
> I require 1.3cm spacing between two columns for my article. Can't find
> it anyway under layout. Secondly, my articles Title, Author, Address
> need to crossover two columns at the first page. I certainly
> appreciate if someone can help
Yes, I managed to increase the spacing. You are very helpful, thanks a lots
Herbert. But the article required two columns text start at first page (just
after address). Aid are appreciated.
MH Lee
- Original Message -
From: Herbert Voss <[EMAIL PROTECTED]>
To: Hisyam Lee &
MH Lee wrote:
>
> Yes, I managed to increase the spacing. You are very helpful, thanks a lots
> Herbert. But the article required two columns text start at first page (just
> after address). Aid are appreciated.
you need latex-package multicol, it's often part of the install
Thanks Herbert, I managed to do as you mentioned. But my two eps files
insert through Insert/Floats/Figure Float not display on dvi but if I change
it to Wide Figure Float it will display nicely but figure will across two
columns. Any suggestion are appreciated.
MH Lee
- Original Message
MH Lee wrote:
>
> Thanks Herbert, I managed to do as you mentioned. But my two eps files
> insert through Insert/Floats/Figure Float not display on dvi but if I change
> it to Wide Figure Float it will display nicely but figure will across two
> columns. Any suggestion are appre
le font size to 20pt?
MH Lee
- Original Message -
From: Yann MORERE <[EMAIL PROTECTED]>
To: MH Lee <[EMAIL PROTECTED]>
Sent: Thursday, August 31, 2000 2:58 PM
Subject: Re: Spacing Between Columns
> MH Lee wrote:
> >
> > Wonderful, exactly what I needed. Thanks Yan
MH Lee wrote:
>
> Beautiful...I only need to change % of page width to 40%, it fit in
> beautifully inside the column. By the way I didn't download any "float"
> package. Currently I'm using version 1.1.5fix1, probably the float package
> is there. Yann and Herbert, THANK YOU.
> How do I change T
I used article class.
MH Lee
- Original Message -
From: Herbert Voss <[EMAIL PROTECTED]>
To: MH Lee <[EMAIL PROTECTED]>
Cc: LyX Users <[EMAIL PROTECTED]>
Sent: Friday, September 01, 2000 3:55 AM
Subject: Re: Spacing Between Columns
> MH Lee wrote:
> >
>
day, September 01, 2000 5:25 PM
Subject: Re: Spacing Between Columns
> MH Lee wrote:
> >
> > How do I change Title font size to 20pt?
>
> mark the title and than choos layout->character->size
>
> Herbert
>
>
MH Lee wrote:
>
> Under that menu are Tiny, Smallest, ..., Normal, Larger, ..., Huge, ...,
> Increase etc.
> I can't find point size that I need.
you don't need it!
for 10pt and 11pt documentwide font size choose \huge
for 12pt \LARGE
than they are always 20.74pt.
another way:
in Latex pream
MH Lee wrote:
>
> How do I change Title font size to 20pt?
mark the title and than choos layout->character->size
Herbert
On Tue, 22 Jun 1999, Henk Coetzee wrote:
> Hi
>
> I produced a two-column document recently, where the hyphenation looked
> pretty grim - single letters cut off words etc. Is there a way to
> optimise this.
Is the document language specified correctly?
How wide are your column
Greets world,
Two quick questions.
I can't make a footnote from within a table.
Is this a feature or a bug?
Where in the documentation are the instructions about binding keys
sequencies to characters to print. I need to be able to produce an `a' with a
macron.
Sincerely etc.,
NAME
gus wrote:
>
> Hello,
>
> I need to print two columns,
> where each paragraph of the right column must be locked to
> a specific line in the left column -- a bit like margin notes,
> though in this case there is almost as much text in the right
> column as in the le
On Wed, 12 Apr 2000, gus wrote:
> I need to print two columns,
> where each paragraph of the right column must be locked to
> a specific line in the left column -- a bit like margin notes,
> though in this case there is almost as much text in the right
> column as in the left.
You
On 12-Apr-2000 gus wrote:
> Hello,
>
> I need to print two columns,
> where each paragraph of the right column must be locked to
> a specific line in the left column -- a bit like margin notes,
> though in this case there is almost as much text in the right
> column as in
I'm writing an article using two columns. It looks good but I have couple
of wide math matrices that don't fit in single column. How could I disable
the columns for a few lines so that the matrix would use both columns?
> I can't make a footnote from within a table.
> Is this a feature or a bug?
IIRC this is a LaTeX 'feature' and LyX does not provide a work around
(yet?)...
Andre'
--
Andre' Poenitz, TU Chemnitz, Fakultaet fuer Mathematik
[EMAIL PROTECTED] ... +49 3727 58 1381
On 08-Sep-99 [EMAIL PROTECTED] wrote:
>
> I can't make a footnote from within a table.
> Is this a feature or a bug?
Try to have a look at the TableExamples.lyx file in the examples-directory
and you'll see how to realize this!
Greets Jürgen
-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-.
I might not be the first to do this, but why keep it to myself?
In addition to the way mentioned in the extended features doc
one can also use the dcolumn package to have decimal alignment in tables.
In the LateX preamble I added:
\usepackage{dcolumn}
\newcolumntype{d}[1]{D{.}{.}{#1}}
To have
Tuukka Toivonen wrote:
>
> I'm writing an article using two columns. It looks good but I have couple
> of wide math matrices that don't fit in single column. How could I disable
> the columns for a few lines so that the matrix would use both columns?
from my point of view
On Tue, Jan 23, 2001 at 08:55:20PM +, Herbert Voss wrote:
> Tuukka Toivonen wrote:
> >
> > I'm writing an article using two columns. It looks good but I have couple
> > of wide math matrices that don't fit in single column. How could I disable
> > th
Dekel Tsur wrote:
>
> On Tue, Jan 23, 2001 at 08:55:20PM +, Herbert Voss wrote:
> > Tuukka Toivonen wrote:
> > >
> > > I'm writing an article using two columns. It looks good but I have couple
> > > of wide math matrices that don't fit in sin
On Tue, 23 Jan 2001, Herbert Voss wrote:
> from my point of view the only senseful way is to use the multicol
I did read the documentation for multicol package and it described other
ways to disable temporarily columns, without the package, simply using
commands
\twocolumn
Hi,
I have inserted a float table into my document. When I right click, the
Table Layout popup appears but I cannot activate the Alignment buttons: it
is fixed on Left.
If I do Edit->Table->Align Right, the document responds correctly. See
table.lyx attached. However, the Table Layout Alignme
On 05-Aug-99 John Andress wrote:
> Hi,
>
> I have inserted a float table into my document. When I right click, the
> Table Layout popup appears but I cannot activate the Alignment buttons: it
> is fixed on Left.
>
The behaviour is VERY right :). You defined a fixed column width which
in LaTeX
Hi Jurgen,
If I remove the fixed width for my columns, then the table extends off the
right hand side of my column. That is why I put in the fixed widths in
the first place. I'll try your multicolumn suggestion, but surely the
fixedness of a column should be independent of the justificati
On 05-Aug-99 John Andress wrote:
> Hi Jurgen,
>
> If I remove the fixed width for my columns, then the table extends off the
> right hand side of my column. That is why I put in the fixed widths in
> the first place. I'll try your multicolumn suggestion, but surely the
>
Hi, I'm editing a double-column paper when I noticed I couldn't adjust the
spacing between the two columns in lyx 1.0.4. Can anybody help?
Kenny
Kenny Zhu Qili wrote:
>
> Hi, I'm editing a double-column paper when I noticed I couldn't adjust the
> spacing between the two columns in lyx 1.0.4. Can anybody help?
Hi,
try inserting "\setlength{\columnsep}{value}" (don't forget the unit in
"value"
p; 0 & A
\end{array}\right] \)
I could do this on digital workstation (alpha) before, but now I changed
to a new computer. When I open the file including such arrays,
it always adds additional columns in the array
like this:
\( \left[ \begin{array}{cc|c}
A & 0 & 0 & \\
0 &
Qingchang Zhong wrote:
>
> I have a problem with arrays in Lyx. Frequently, I need insert
> vertical and horizontal lines into arrays. For example,
> A 0| 0
> 0A | 0
>
> 00| A
>
>
> The corresponding latex code is :
>
> \( \left[ \begin{array}{cc|c}
> A &
r. When I open the file including such arrays, it
> always adds additional columns in the array like this:
[deleted]
> When compiling it, the following error:
> extra alignment has been changed to ...
> comes out and then it stops.
>
> I think it is because Lyx reads cc|c as fou
Dear Herbert,
Thank you for your solution.
Along with your solution, I obtained a solution to change massive arrays
including vertical lines.
Some suggestions regarding to vertical/horizontal lines in arrays are:
1. horizontal lines can be input in arrays directly with \hline
at the first cell of
On Tue, Jun 05, 2001 at 11:15:30AM +0100, Qingchang Zhong wrote:
> Dear Herbert,
> Along with your solution, I obtained a solution to change massive arrays including
>vertical lines.
>
> Some suggestions regarding to vertical/horizontal lines in arrays are:
>
> 1. horizontal lines can be input
44 matches
Mail list logo