On 8.06.04, Vaclav Smidl wrote:
> On Tuesday 08 June 2004 08:25, Matthew McKay wrote:
> >
> > I am trying to place images inside of a table, however whenever I do so
> > the text in the other columns always starts in line with the bottom of the
> > image.
This is
On Tue, 8 Jun 2004, Vaclav Smidl wrote:
> What you are looking for is "Vertical alignment" which is (a bit
> contra-intuitively) in the group with "Column Width". It is grayed-out by
> default. If you specify width of your columns (e.g. 50 col%), you can
> select vertical alignment.
Another qu
On Tuesday 08 June 2004 08:25, Matthew McKay wrote:
> Hey,
>
> I am trying to place images inside of a table, however whenever I do so
> the text in the other columns always starts in line with the bottom of the
> image. I have tried placing the image inside a float and t
Matthew McKay wrote:
> Any suggestions on how to get images into tables looking right?
I think you need to define 'right'.
How would you like things to appear?
--
Angus
Hey,
I am trying to place images inside of a table, however whenever I do so the
text in the other columns always starts in line with the bottom of the
image. I have tried placing the image inside a float and then into a cell
but then lyx compiles with errors and doesn't like to h
Raphael Clifford wrote:
> Hi,
>
> This is probably more of an Imagemagick question than a lyx one so
> sorry
> for that. I have included http://st179.dcs.kcl.ac.uk/chopin.ps as
> a
> figure in a lyx document. Despite choosing "clip to bounding box"
> the whole image is shown in lyx. When viewe
Hi,
This is probably more of an Imagemagick question than a lyx one so sorry
for that. I have included http://st179.dcs.kcl.ac.uk/chopin.ps as a
figure in a lyx document. Despite choosing "clip to bounding box" the
whole image is shown in lyx. When viewed in postscript the image is
clipped
Omair-Inam Abdul-Matin wrote:
>> I just switched on the Instant preview mode. I can see my eps
>> files in the Lyx window but before that when the command prompt
>> window opens
>> Windows throws an error. The following message appears in the
>> command prompt
>>
>> 0 [main] cut 4792 open_stackd
Omair-Inam Abdul-Matin wrote:
Hi,
I just switched on the Instant preview mode. I can see my eps files in
the Lyx window but before that when the command prompt window opens
Windows throws an error. The following message appears in the command
prompt
0 [main] cut 4792 open_stackdumpfile: Dum
Hi,
I just switched on the Instant preview mode. I can see my eps files in
the Lyx window but before that when the command prompt window opens
Windows throws an error. The following message appears in the command
prompt
0 [main] cut 4792 open_stackdumpfile: Dumping stack trace to
cut.exe.st
Stephen Lawrence wrote:
I have been trying all day to get a gif or a ps or an eps to show up
when I view my document from lyx. The image shows up in the lyx window,
but the export or preview to any format do not show the image. What am I
doing wrong here?
Do you have the appropriate converters d
I have been trying all day to get a gif or a ps or an eps to show up
when I view my document from lyx. The image shows up in the lyx window,
but the export or preview to any format do not show the image. What am I
doing wrong here?
Lyx 1.3.3
Redhat fedora
--
Stephen Lawrence Jr. - Programmer II
On Wed, Dec 10, 2003 at 03:07:23AM -0700, Andreas Novak wrote:
> I'm using kdvi 1.0 and xdvi(k) 22.77.3. But anyway it's the same problem
> with acrobat reader 5.0 and dvipdfm.
Pretty strange.
Sorry, I have no idea.
Andre'
Andre Poenitz schrieb:
On Wed, Dec 10, 2003 at 02:52:13AM -0700, Andreas Novak wrote:
yes they are printed i didn't try that before! Can you tell me which
packages I have to update?
It's probably your dvi viewer. I am using xdvi(k) version 22.40h but I
think any xdvi not older than ten ye
On Wed, Dec 10, 2003 at 02:52:13AM -0700, Andreas Novak wrote:
> yes they are printed i didn't try that before! Can you tell me which
> packages I have to update?
It's probably your dvi viewer. I am using xdvi(k) version 22.40h but I
think any xdvi not older than ten years or so should have that
Andre Poenitz schrieb:
On Wed, Dec 10, 2003 at 02:39:15AM -0700, Andreas Novak wrote:
OK I've solved the problem with prettyref, but I've absolutely no idea
how to display my images in a dvi/pdf document. I've installed
ImageMagick 5.5.7. after selecting view->DVI from the
On Wed, Dec 10, 2003 at 02:39:15AM -0700, Andreas Novak wrote:
> OK I've solved the problem with prettyref, but I've absolutely no idea
> how to display my images in a dvi/pdf document. I've installed
> ImageMagick 5.5.7. after selecting view->DVI from the lyx menu, th
mageMagick for image conversion and lyx 1.3.3 with the qt ui.
My problem is:
I can insert graphics into my documents, all these graphics are
correctly shown in Lyx, but when I want to display a DVI or PDF file of
the document, none of the images displayed in my document are shown (no
error messa
using ImageMagick for image conversion and lyx 1.3.3 with the qt ui.
>
> My problem is:
> I can insert graphics into my documents, all these graphics are
> correctly shown in Lyx, but when I want to display a DVI or PDF file of
> the document, none of the images displayed in my document
t graphics into my documents, all these graphics are
correctly shown in Lyx, but when I want to display a DVI or PDF file of
the document, none of the images displayed in my document are shown (no
error messages in lyx). I can't view the user documentation as DVI/PDF
either, the error me
> I am trying to put some figures etc into a document
> and everytime I try to view the DVI i get error
> messages cant convert whatever format to eps. I have
> tried heaps of different formats.
You have to insert new converters. Go into LyX preferences -> converters and
add for example jpg to eps
I am trying to put some figures etc into a document
and everytime I try to view the DVI i get error
messages cant convert whatever format to eps. I have
tried heaps of different formats. I reinstalled
Imagemagick etc all to no avail. Here is one of the
error messages:
dyld: convert version mismatc
On Sat, 2003-10-18 at 21:43, Toby Allen wrote:
> I have several power point presentations that have
> images in them that I want to use in my Thesis that I
> am writing in AquaLyx.
First, I recommend using OpenOffice to extract the images from the
presentation as it is generally bette
Toby Allen wrote:
> How do I get them from the power point slides to the
> Lyx doc?
What about printing them to the Postscript printer and saving
them to file?
Matej
--
Matej Cepl,
GPG Finger: 89EF 4BC6 288A BF43 1BAB 25C3 E09F EF25 D964 84AC
138 Highland Ave. #10, Somerville, Ma 02143, (617)
I have several power point presentations that have
images in them that I want to use in my Thesis that I
am writing in AquaLyx.
How do I get them from the power point slides to the
Lyx doc?
Thanks
=
<-: TOBY ALLEN :->
"As far as the laws of mathematics refer to reality, t
When I did this, I scanned each page to a whole A4 page, and then scaled
them down by about 90% or so. Enough so that I could see the headers and
the like.
But you can also scale to the page width in Lyx, which sounds like what
you want. Of course, that will preserve the aspect ratio to.
Rod
O
Jason Clinton wrote:
Rod Pinna wrote:
You can do it and it is pretty easy. Include each page as a picture, and
scale it appropriately.
You might want to covnert the pics to eps type 2 files as well.
Conversion will be no problem. Wondering, though: does LaTeX have a
command (that I could pas
Rod Pinna wrote:
You can do it and it is pretty easy. Include each page as a picture, and
scale it appropriately.
You might want to covnert the pics to eps type 2 files as well.
Conversion will be no problem. Wondering, though: does LaTeX have a
command (that I could pass through LyX) to sca
> > The benefits I envision would be:
> >
> >* A single file for the whole grant proposal.
> >* Consistent page numbering and an accurate, dynamic TOC.
> >
> > Does anyone have any experience doing this?
>
> What kind of answer do you expect after your introduction?
Yup...that's kinda
atures on them (letters of support) in to TIFF format and then,
> by some means, include those images, one to each page, in the final
> document. By one to each page, I mean, the final document will have the
> image slightly shrunken with the page number generated by LaTeX at the
>
much, zealot.)
I am writing a grant in LyX and would like to scan in some pages that
have signatures on them (letters of support) in to TIFF format and then,
by some means, include those images, one to each page, in the final
document. By one to each page, I mean, the final document will hav
pgp0.pgp
Description: PGP signature
Albrecht Dreß schrieb:
I wrote a document which includes several png and eps images in LyX
1.3.2 both on Linux and Aqua/MacOS X. This works perfectly when I
preview or output PostScript, but when running "View->PDF (pdflatex)"
the images are simply missing. Did I miss se
Hi,
I wrote a document which includes several png and eps images in LyX 1.3.2
both on Linux and Aqua/MacOS X. This works perfectly when I preview or
output PostScript, but when running "View->PDF (pdflatex)" the images are
simply missing. Did I miss setting up some converter
On Tue, Aug 05, 2003, Philipp Bönisch wrote:
[Using LyX for Windows:]
> . The problem is, when I
> >> want to see the DVI, the system asks me, which programm I want to
> >> use to run the convertDefault.sh.
It should not be necessary to install cygwin; Ruurd distributes an "sh.exe"
shell that i
On Tue, Aug 05, 2003 at 09:00:09PM +0200, Philipp Bönisch wrote:
> On Tuesday, August 05, 2003 6:05 PM <[EMAIL PROTECTED]> wrote:
> > On Tue, Aug 05, 2003 at 05:58:15PM +0200, Philipp Bönisch wrote:
> >> Hi, I want to have some pictures in my LyX-document. It is not the
> >> problem to import them
Hi,
I want to have some pictures in my LyX-document. It is not the problem to import them
into the document. The problem starts when I want to see the DVI-file or something
like this. I use LyX for Windows and a complete install of MykTex.
The problem is, when I want to see the DVI, the system as
On Tue, Aug 05, 2003 at 05:58:15PM +0200, Philipp Bönisch wrote:
> Hi, I want to have some pictures in my LyX-document. It is not the
> problem to import them into the document. The problem starts when I
> want to see the DVI-file or something like this. I use LyX for Windows
> and a complete insta
On Tuesday, August 05, 2003 6:05 PM <[EMAIL PROTECTED]> wrote:
> On Tue, Aug 05, 2003 at 05:58:15PM +0200, Philipp Bönisch wrote:
>> Hi, I want to have some pictures in my LyX-document. It is not the
>> problem to import them into the document. The problem starts when I
>> want to see the DVI-file
sorry...you are absolutely correct, I should have made that clearer
Owen Lucas wrote:
>
> Just to spell it out that is to add
> \lhead{\includegraphics{"graphic filename"}}
> in the preamble of the document not in as text and to have the "graphic
> filename" in its full path.
>
> Paul Medwell wr
El Martes, 29 de Julio de 2003 03:32, Pablo Rodriguez Gonzalez escribió:
> Hi guys,
>
> How can I move an inserted image to left, right, etc...?. I didn't see the
> option, clicking on the image.
>
> How can I set footer/header to a document?. Fox example, I want that in all
> documents I write, my
El Martes, 29 de Julio de 2003 03:32, Pablo Rodriguez Gonzalez escribió:
> Hi guys,
>
> How can I move an inserted image to left, right, etc...?. I didn't see the
> option, clicking on the image.
>
> How can I set footer/header to a document?. Fox example, I want that in all
> documents I write, my
Just to spell it out that is to add
\lhead{\includegraphics{"graphic filename"}}
in the preamble of the document not in as text and to have the "graphic
filename" in its full path.
Paul Medwell wrote:
How can I set footer/header to a document?. Fox example, I want that
in all documents I writ
Hi Paul,
On Tue, 29 Jul 2003 12:19:22 +0930
Paul Medwell <[EMAIL PROTECTED]> wrote:
>
> Pablo Rodriguez Gonzalez wrote:
> > How can I move an inserted image to left, right, etc...?. I didn't see the option,
> > clicking on the image.
>
> Layout -> Paragraph
>
First of all: photo doesn't appe
Pablo Rodriguez Gonzalez wrote:
How can I move an inserted image to left, right, etc...?. I didn't see the option, clicking on the image.
Layout -> Paragraph
How can I set footer/header to a document?. Fox example, I want that in all documents I write, my company's logo appears in header...
Make s
Hi guys,
How can I move an inserted image to left, right, etc...?. I didn't see the option,
clicking on the image.
How can I set footer/header to a document?. Fox example, I want that in all documents
I write, my company's logo appears in header...
Thanks in advance,
--
Pablo Rodriguez Gonza
Thanks Angus!
After playing arround a bit with your scripts and the convertDefault.sh
one, I managed to preview the images fine into LyX.
Best regards,
Mariano.
, and I used a rpm
> (I'm running LyX under RedHat Linux 8.0). But then I wanted to try the
> last version, so I get 1.3.2 from source, and compiled it.
> Everything went well... except for the "inserted" images. Whenever I
> insert an image into my document, I got an "
nux 8.0). But then I wanted to try the last
version, so I get 1.3.2 from source, and compiled it.
Everything went well... except for the "inserted" images. Whenever I insert
an image into my document, I got an "Error loading image into memory"
message, and the image is n
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have acquired ps2eps and have used it on a postscript file of a figure I
created with StarDraw. StarDraw ps output, even its export to eps,
often/usually has extra whitespace included in the product and in this
particular case, the whitespace is
On Thu, 20 Feb 2003, Joao B. Oliveira wrote:
> I think that adding nice to the conversion process is a good idea
> that can be done in a user-by-user basis, but I believe that one
> of the major problems of convert is its memory consumption. Adding
> nice would reduce the CPU consumption, but afte
--- "Joao B. Oliveira" <[EMAIL PROTECTED]> wrote:
> Thta is why I believe that making the conversion process a serial
> one would speed up things much more: memory is used for one image
> at a time and thus fills up only in extreme cases. No swap, no disk
> delays, etc...
I think it is better to
vsharma wrote:
> I use ver1.3.0 Lyx support ver 1.7 on cygwin with windows XP Professional
> I am new to this program so excuse any silly questions
You're excused ;-)
> I cannot load .png images to display in lyx window
Are you using the Qt or the xforms frontend? The Qt fron
> > > > > I have used LyX in -dbg mode and checked the conversion process. It
> > > > > does not seem that LyX itself is doing things badly, but it calls
> > > > > convert for every image on the current screen and convert seems to
> > > > > be doing a bad job, taking up all memory and filling the s
I use ver1.3.0 Lyx support ver 1.7 on cygwin with windows XP Professional
I am new to this program so excuse any silly questions
I cannot load .png images to display in lyx window, it informs me that
there is error converting to loadable format trying to invoke view dvi
gives message no
Andre Poenitz wrote:
> Have you tried to run xfig's exported .eps files through 'eps2eps'?
> It makes pretty compact .eps...
Much more complicated idea would be to produce Metapost sources
instead of xfig -- interposing of Bezier curves over set of
points is very simple in MP. However, of course,
On Tue, Feb 18, 2003 at 04:19:20PM -0300, Joao B. Oliveira wrote:
> Of course, Jean-Marc's question about how to get 1.5 Mb EPS images
> is a valid one. The answer: we have a few programs that create
> images directly in XFig format. From that they can be edited and/or
> converted
On Tue, Feb 18, 2003 at 07:47:22PM +0200, Dekel Tsur wrote:
> We should modify convertDefault.sh to work as a filter, namely
> 'convertDefault.sh file.eps' should write its output to stdout and not to
> the disk.
Seconded.
And possibly read from stdin, at least if no file argument was given...
A
On Tue, 18 Feb 2003, Angus Leeming wrote:
> On Tuesday 18 February 2003 8:24 pm, Christian Ridderström wrote:
> > On Tue, 18 Feb 2003, Angus Leeming wrote:
> > > Joao B. Oliveira wrote:
> > > > I have used LyX in -dbg mode and checked the conversion process. It
> > > > does not seem that LyX itsel
On Tuesday 18 February 2003 8:24 pm, Christian Ridderström wrote:
> On Tue, 18 Feb 2003, Angus Leeming wrote:
> > Joao B. Oliveira wrote:
> > > I have used LyX in -dbg mode and checked the conversion process. It
> > > does not seem that LyX itself is doing things badly, but it calls
> > > convert f
On Tue, 18 Feb 2003, Angus Leeming wrote:
> Joao B. Oliveira wrote:
> > I have used LyX in -dbg mode and checked the conversion process. It
> > does not seem that LyX itself is doing things badly, but it calls
> > convert for every image on the current screen and convert seems to
> > be doing a ba
Joao B. Oliveira wrote:
> Well, not really. It is rather common (at least here) to put
> several smaller images in a figure, to draw comparisons like "In
> Fig 6a you see this, and in 6b we clearly see that, but 6c clearly
> shows...". Sometimes we put four or six smaller EPS
hi everyone,
> > Some history first: I keep LyX running on a Computer Science...
>
> The image handling code in LyX 1.2 is indeed nasty. Things should be much
> better in LyX 1.3. In LyX 1.3 the conversion process is triggered only for
> images that have been on screen for
On Tue, Feb 18, 2003 at 12:36:35PM +, Angus Leeming wrote:
> > -- First of all, how does the conversion/display process really
> > works? Specially, how EPS files are handled? (I understand that
> > they are always converted to ppm for displaying? Why ppm?)
>
> If you run
> $ lyx -dbg
Jean-Marc Lasgouttes wrote:
> Joao> -- If EPS files are large (I have some with more or less 1.5 Mb)
> Joao> their conversion and displaying takes all memory and a 64Mb
> Joao> computer simply crashes. With more images of the same size,
> Joao> larger machines crash as
>>>>> "Joao" == Joao B Oliveira <[EMAIL PROTECTED]> writes:
Joao> -- If EPS files are large (I have some with more or less 1.5 Mb)
Joao> their conversion and displaying takes all memory and a 64Mb
Joao> computer simply crashes. With more images of the s
ad that I have already given up LyX myself, at
> least for documents that have more than a few images.
The image handling code in LyX 1.2 is indeed nasty. Things should be much
better in LyX 1.3. In LyX 1.3 the conversion process is triggered only for
images that have been on screen for 2
so much memory that using the system is impossible. In fact,
situation is so bad that I have already given up LyX myself, at
least for documents that have more than a few images.
Unfortunately this affected both the work of the students (I saw
one of once them waiting for 20 minutes until all
On Sun, Feb 02, 2003 at 02:40:55PM -0500, Frederic Leymarie wrote:
> anyone knows of a way to produce the mirror
> image of a character, say B (alike a rotation
> of 180 degrees but such that the resulting letter
> is still aligned correctly with respect to the rest
> of the line).
\usepackage{gr
Frederic asked:
>anyone knows of a way to produce the mirror
>image of a character, say B (alike a rotation
>of 180 degrees but such that the resulting letter
>is still aligned correctly with respect to the rest
>of the line).
I don't think this could be done directly in LyX or TeX/LaTeX.
AFAIK,
Hi there
anyone knows of a way to produce the mirror
image of a character, say B (alike a rotation
of 180 degrees but such that the resulting letter
is still aligned correctly with respect to the rest
of the line).
Cheers
Frederic
--
Frederic FOL LEYMARIE, R&D Project leader, SHAPE Lab.
http:
Andre wrote:
>Neither '*' nor '+' are valid "operators" to do math in TeX.
>
>Have you tried
>
>\rput[r](0.5\wd\Imagebox,0){Lower Right}
:) Thanks I didn't try that combination!
Rob
On Tue, Jan 28, 2003 at 12:34:13PM +0100, [EMAIL PROTECTED] wrote:
> But this doesn't work nor do all the possible bracket (,{ and [ combinations
> I thought might help! I tried putting the multiplication factor on the end
> of the \wd\Imagebox and even addition and subtraction seem not to work.
>
Herbert Voss wrote:
>here is a better one to see what is going on.
>
>Herbert
>
>\centering\savebox{\Imagebox}{\includegraphics{/tmp/eva.eps}}
>
>\begin{minipage}{\wd\Imagebox}
>\begin{pspicture}(\wd\Imagebox,\ht\Imagebox)
> \setlength\fboxsep{0pt}
> \rput[lb](0,0){\fbox{\usebox{\Imagebox}}}
> \
]
Thema: Re: text overlayed onto images
Herbert Voss schrieb:
> the following is the ert-stuff from inside a float figure:
here is a better one to see what is going on.
Herbert
\centering\savebox{\Imagebox}{\includegraphics{/tmp/eva.eps}}
\begin{minipage}{\wd\Imagebox}
\begin{pspict
On Fri, 24 Jan 2003, Owen Lucas wrote:
> file name as the one before. When I regenerated the dvi the old graph
> still shows. It does not update the image :-). Deciding to work the bug
>
lyx 1.1.6fix4 does not have this problem
--
Steven Homolya
School of Physics and Materials Engineering
Mon
On Fri, 24 Jan 2003, Owen Lucas wrote:
> Hi All
>
> Well the actual text isn't rolling along that well so I decided to
> procrastinate and put some nice images in. I have inserted and image
I'll join you in the procrastination :-), letting you know that this is a
kno
Hi All
Well the actual text isn't rolling along that well so I decided to
procrastinate and put some nice images in. I have inserted and image
(eps graph) and the font / line width were too small when place in the
lyx document. I then went and changed the graph and saved it to the same
In viewing a pdf the graphics appear fine, but when I extract the images using
pdfimages, the jpegs are OK but all the pbm or ppm images turn out with
reversed video (white is black and vice versa) but with the loss of SOME
information, ie, a plot loses its black plot lines (they are not
> I get a blank space the size of the figure. The command line output of
> view->ps says the name of my-figure.eps is not found, although the
Make sure you've included the color package in your preamble.. that is
needed when inserting xfig figures.. also check to ensure that you have
the "Special
Dear list,
I've followed the LyX User Guide in trying to embed LaTeX in my xfig
figures. But it doesn't work.
I get a blank space the size of the figure. The command line output of
view->ps says the name of my-figure.eps is not found, although the other
files are found in the temp dir. Is this so
Herbert Voss schrieb:
the following is the ert-stuff from inside a float figure:
here is a better one to see what is going on.
Herbert
\centering\savebox{\Imagebox}{\includegraphics{/tmp/eva.eps}}
\begin{minipage}{\wd\Imagebox}
\begin{pspicture}(\wd\Imagebox,\ht\Imagebox)
\setlength\fboxsep
[EMAIL PROTECTED] schrieb:
the origin and make it somehow relative to the size ("latex size" in the
insert>graphics popup).
So I can scale my image as much as I want and the origin always stays on say a
corner of the
image. That is to say I'd like to not have to fiddle with the location of text
Hi,
I have a question with regard to overlaying text onto an image (see small
example attached). The
solution as presented in Herbert Voss's tips and tricks, describes using the
command
\rput in ERT to specify the coordinates of where the text is to go. The origin
seems to
be on the bottom cen
> I'm exporting from Lyx to HTML (using latex2html), but images aren't
> translated.
>
I think this might be due to the nosubdir option that's set in LyX.. try
taking out that option and it'll create a directory and put everything
in it.. that's what would h
Mario Carugno wrote:
I'm exporting from Lyx to HTML (using latex2html), but images aren't translated.
Why ? What can i do to get html with images from Lyx ?
Thank you
That's odd - normally latex2html will convert all images to PNG format
using (I think) pstopnm and pnmtopng
I'm exporting from Lyx to HTML (using latex2html), but images aren't translated.
Why ? What can i do to get html with images from Lyx ?
Thank you
--
__
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.ma
On Thu, Sep 19, 2002 at 02:42:42PM +0200, Axel Heinrici wrote:
> Hi
>
> Is there a way to put Text over an image.
> I have an eps image and I want to do the labeling with something
> equivalent to tex:"\put(3,7){this is the mounting}" inside this
> image.
See
http://www.lyx.org/help/psTricks/
Hi
Is there a way to put Text over an image.
I have an eps image and I want to do the labeling with something
equivalent to tex:"\put(3,7){this is the mounting}" inside this
image.
greetings
Axel
On Mon, Sep 09, 2002 at 05:02:00PM -0700, Ashvin Goel wrote:
> As I said in another mail, even if you don't want all images to be
> rendered immediately, lyx will try to render them all if you search for
> a word from the beginning of the file and the word does not exist in the
John Levon wrote:
> On Sat, Sep 07, 2002 at 10:00:07PM +0200, I Wayan Warmada wrote:
>
>
>>| I have been using lyx for the last 6 months and I quite happy with it.
>>| However, I have the problem that when lyx (or convert from ImageMagick)
>>| opens too many images at
I have been using lyx for the last 6 months and I quite happy with it.
However, I have the problem that when lyx (or convert from ImageMagick)
opens too many images at a time, my machine (600Mhz x86 processor)
grinds to a halt. No interactive operations including moving a mouse are
possible
On Sat, Sep 07, 2002 at 10:00:07PM +0200, I Wayan Warmada wrote:
> | I have been using lyx for the last 6 months and I quite happy with it.
> | However, I have the problem that when lyx (or convert from ImageMagick)
> | opens too many images at a time, my machine (600Mhz x86
On Sat, 7 Sep 2002, Ashvin Goel wrote:
| I have been using lyx for the last 6 months and I quite happy with it.
| However, I have the problem that when lyx (or convert from ImageMagick)
| opens too many images at a time, my machine (600Mhz x86 processor)
| grinds to a halt. No interactive
;
> cc: [EMAIL PROTECTED]
> Subject: Re: opening graphics images sequentially using convert
> In-Reply-To: <[EMAIL PROTECTED]>
> X-AntiVirus: scanned for viruses by AMaViS 0.2.1 (http://amavis.org/)
>
>
> On Sat, 7 Sep 2002, Ashvin Goel wrote:
>
> | I have been
On Sat, 7 Sep 2002, Ashvin Goel wrote:
| You must be joking ;-) I am currently working on a document that has about 75
| images and is several hundred pages long. My whole point of keeping each image
| box open before saving the file is that I want the images opened when I open
| the document
On Sat, 7 Sep 2002, John Levon wrote:
| You missed his point - he WANTS all the images rendered immediately (not
| sure why though ;)
sorry, I have thought about rendering images after opening the file...
Wayan
Hi,
I am having a problem using pdflatex with a pdf image
in the left of the header and text at the right. The
image is included ok, but the text on the right is
shifted down the page, overlapping the main body of
the text. If I use text in the left of the header
instead of an image, the right si
CTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 28, 2002 5:31 PM
Subject: Re: Try again...flowing text around images (floatflt)
> On Wed, Aug 28, 2002 at 11:10:30AM -0500, Praedor Tempus wrote:
>
> > Could someone please inform me as to the requirements to get floatflt
On Wed, Aug 28, 2002 at 11:10:30AM -0500, Praedor Tempus wrote:
> Could someone please inform me as to the requirements to get floatflt to work
> in lyx-1.2.0? I ran into a difficulty with it when trying to write a grant
> and ended up having to use another wordprocessor because I simply could
301 - 400 of 555 matches
Mail list logo